e3-hacking

e3-hacking@earth.li

395 discussions

[PATCH 0/2] Give the N_AMSDELTA line discipline more generic name
by Janusz Krzysztofik 07 Aug '09

07 Aug '09

This series of patches renames the N_AMSDELTA line discipline, used by the Amstrad Delta ASoC machine driver and the CX20442 ASoC codec driver for controlling the CX20442 voice codec over the CX81801 voice modem, giving it a more generic name: N_V253. The name has been chosen after the voice modem standard codename V.253. I think that even if the code of the line discipline is currently implemented inside those two specific drivers, the idea, if not the code, could be reused with other similar hardware configurations, if necessary. As the line discipline is conceived to be registered from a machine driver, there should be no conflicts, even if used by several different drivers that happen to be be built-in side-by-side. [PATCH 1/2] TTY: Rename N_AMSDELTA line discipline to N_V253 [PATCH 2/2] ASoC: AMS_DELTA: Use updated line discipline name Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl>

2 1

[PATCH 2/2] ASoC: AMS_DELTA: Use updated line discipline name
by Janusz Krzysztofik 06 Aug '09

06 Aug '09

This patch updates the tty line discipline name used in the Amstrad Delta machine driver. Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> --- --- linux-2.6.31-rc5/sound/soc/omap/ams-delta.c.orig 2009-08-05 21:44:35.000000000 +0200 +++ linux-2.6.31-rc5/sound/soc/omap/ams-delta.c 2009-08-05 23:30:53.000000000 +0200 @@ -519,7 +519,7 @@ static int ams_delta_cx20442_init(struct } /* Register optional line discipline for over the modem control */ - ret = tty_register_ldisc(N_AMSDELTA, &cx81801_ops); + ret = tty_register_ldisc(N_V253, &cx81801_ops); if (ret) { dev_warn(card->dev, "Failed to register line discipline, " @@ -644,9 +644,9 @@ static void __exit ams_delta_module_exit } } - if (tty_unregister_ldisc(N_AMSDELTA) != 0) + if (tty_unregister_ldisc(N_V253) != 0) dev_warn(&ams_delta_audio_platform_device->dev, - "failed to unregister AMSDELTA line discipline\n"); + "failed to unregister V253 line discipline\n"); snd_soc_jack_free_gpios(&ams_delta_hook_switch, ARRAY_SIZE(ams_delta_hook_switch_gpios),

1 0

[PATCH 1/2] TTY: Rename N_AMSDELTA line discipline to N_V253
by Janusz Krzysztofik 06 Aug '09

06 Aug '09

The patch changes the line discipline name registered in include/linux/tty.h Signed-off-by: Janusz Krzysztofik --- --- linux-2.6.31-rc5/include/linux/tty.h.orig 2009-08-05 21:44:33.000000000 +0200 +++ linux-2.6.31-rc5/include/linux/tty.h 2009-08-05 22:54:12.000000000 +0200 @@ -47,7 +47,7 @@ #define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */ #define N_PPS 18 /* Pulse per Second */ -#define N_AMSDELTA 19 /* codec control over modem, board specific */ +#define N_V253 19 /* Codec control over voice modem */ /* * This character is the same as _POSIX_VDISABLE: it cannot be used as

1 0

[PATCH 0/2] ASoC: CX2044: full duplex mode fix
by Janusz Krzysztofik 06 Aug '09

06 Aug '09

This series of patches tries to solve the problem of audio mode changes not working correctly while in full duplex mode. [PATCH 1/2] ASoC: CX20442: add some debugging [PATCH 2/2] ASoC: CX20442: simplify codec controller usage Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl>

2 1

[PATCH 2/2] ASoC: CX20442: simplify codec controller usage
by Janusz Krzysztofik 06 Aug '09

06 Aug '09

This patch is a workaround for the problem of several subsequent control statements not being applied correctly to the codec controller (modem). In order to follow the hook switch state change from handset to handsfree while in full duplex mode, two consecutive +VLS control commands were sent to the modem. The first one was M1 (microphone only), the seconds one was M1S1 (both microphone and speaker). As there was no real modem handshaking procedure implemented, neither in the codec nor in the machine driver part of the line discipline, the modem was having the second command missed. Since a possibility to switch to microphone only mode (and speaker only mode as well) seams of no value, I have modified the code to issue single M1S1 command only for any of those cases. Tested on my Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> --- --- linux-2.6.31-rc5/sound/soc/codecs/cx20442.c.orig 2009-08-04 23:41:03.000000000 +0200 +++ linux-2.6.31-rc5/sound/soc/codecs/cx20442.c 2009-08-05 00:56:30.000000000 +0200 @@ -138,9 +138,7 @@ static int cx20442_pm_to_v253_vls(u8 val case 0: return V253_VLS_T; case (1 << CX20442_SPKOUT): - return V253_VLS_S1; case (1 << CX20442_MIC): - return V253_VLS_M1; case (1 << CX20442_SPKOUT) | (1 << CX20442_MIC): return V253_VLS_M1S1; case (1 << CX20442_TELOUT):

1 0

[PATCH 1/2] ASoC: CX20442: add some debugging
by Janusz Krzysztofik 06 Aug '09

06 Aug '09

This patch adds debugging statement that can help in tracing how the driver is trying to control the codec device. Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> --- --- linux-2.6.31-rc5/sound/soc/codecs/cx20442.c.orig 2009-08-04 23:41:03.000000000 +0200 +++ linux-2.6.31-rc5/sound/soc/codecs/cx20442.c 2009-08-05 00:56:30.000000000 +0200 @@ -203,6 +201,7 @@ static int cx20442_write(struct snd_soc_ if (unlikely(len > (ARRAY_SIZE(buf) - 1))) return -ENOMEM; + dev_dbg(codec->dev, "%s: %s\n", __func__, buf); if (codec->hw_write(codec->control_data, buf, len) != len) return -EIO;

1 0

Re: [E3-hacking] [RFC] [PATCH] ASoC: OMAP: full duplex mode fix
by Janusz Krzysztofik 06 Aug '09

06 Aug '09

Wednesday 05 August 2009 10:42:54 Jarkko Nikula wrote: > On Wed, 5 Aug 2009 10:21:49 +0300 > Jarkko Nikula <jhnikula(a)gmail.com> wrote: > > > If my analysis is correct, the best solution I can see would be > > > starting McBSP transfer for one direction only, not both, so the > > > opposite direction can be started when needed. That requires deeper and > > > wider OMAP knowledge and a change in omap_mcbsp_start() API though. I > > > am not in a position to deal with this myself, I'm afraid. > > > > I favor this change. Actually I remember I was thinking shortly to > > change API of omap_mcbsp_start and _stop more than year back or so but > > didn't find it necessary back then. > > > > I think change will be trivial. Basically two new arguments indicating > > are the TX/RX active and let the first/last caller to deal with > > sample-rate generator and frame sync activation/de-activation. > > I hacked a patch below. Can you test does it help? Yes, it does. Works as expected in all possible combinations I have tried: start recording while playing, start playing while recording, start recording and playing simultaneously. Thanks. Tested-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl>

1 0

[RFC] [PATCH] ASoC: OMAP: full duplex mode fix
by Janusz Krzysztofik 03 Aug '09

03 Aug '09

This patch tries to correct the problem of full duplex mode not working over a single McBSP based CPU DAI. Created against linux-2.6.31-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> --- --- linux-2.6.31-rc5/sound/soc/omap/omap-mcbsp.c.orig 2009-08-01 02:40:45.000000000 +0200 +++ linux-2.6.31-rc5/sound/soc/omap/omap-mcbsp.c 2009-08-03 03:28:07.000000000 +0200 @@ -183,6 +183,7 @@ static int omap_mcbsp_dai_trigger(struct struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data); + u16 buf; int err = 0; switch (cmd) { @@ -191,6 +192,14 @@ static int omap_mcbsp_dai_trigger(struct case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: if (!mcbsp_data->active++) omap_mcbsp_start(mcbsp_data->bus_id); + else if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + /* looks like capture already in progress, + * start playback by taking it out of error condition */ + omap_mcbsp_pollwrite(mcbsp_data->bus_id, 0x0); + else + /* looks like playback already in progress, + * start capture by taking it out of error condition */ + omap_mcbsp_pollread(mcbsp_data->bus_id, &buf); break; case SNDRV_PCM_TRIGGER_STOP:

4 6

[RFC] [PATCH 3/3 v2] ASoC: add support for Amstrad E3 (Delta) machine
by Janusz Krzysztofik 31 Jul '09

31 Jul '09

This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> --- --- linux-2.6.31-rc3/sound/soc/omap/Kconfig.orig 2009-07-04 16:40:00.000000000 +0200 +++ linux-2.6.31-rc3/sound/soc/omap/Kconfig 2009-07-22 01:06:51.000000000 +0200 @@ -15,6 +15,14 @@ config SND_OMAP_SOC_N810 help Say Y if you want to add support for SoC audio on Nokia N810. +config SND_OMAP_SOC_AMS_DELTA + tristate "SoC Audio support for Amstrad E3 (Delta) videophone" + depends on SND_OMAP_SOC && MACH_AMS_DELTA + select SND_OMAP_SOC_MCBSP + select SND_SOC_CX20442 + help + Say Y if you want to add support for SoC audio on Amstrad Delta. + config SND_OMAP_SOC_OSK5912 tristate "SoC Audio support for omap osk5912" depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C --- linux-2.6.31-rc3/sound/soc/omap/Makefile.orig 2009-07-04 16:40:00.000000000 +0200 +++ linux-2.6.31-rc3/sound/soc/omap/Makefile 2009-07-22 01:06:51.000000000 +0200 @@ -7,6 +7,7 @@ obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd- # OMAP Machine Support snd-soc-n810-objs := n810.o +snd-soc-ams-delta-objs := ams-delta.o snd-soc-osk5912-objs := osk5912.o snd-soc-overo-objs := overo.o snd-soc-omap2evm-objs := omap2evm.o @@ -16,6 +17,7 @@ snd-soc-omap3pandora-objs := omap3pandor snd-soc-omap3beagle-objs := omap3beagle.o obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o +obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o --- /dev/null 2009-07-27 16:01:44.916962115 +0200 +++ linux-2.6.31-rc3/sound/soc/omap/ams-delta.c 2009-07-29 12:11:57.000000000 +0200 @@ -0,0 +1,646 @@ +/* + * ams-delta.c -- SoC audio for Amstrad E3 (Delta) videophone + * + * Copyright (C) 2009 Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> + * + * Initially based on sound/soc/omap/osk5912.x + * Copyright (C) 2008 Mistral Solutions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/gpio.h> +#include <linux/spinlock.h> +#include <linux/tty.h> + +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include <mach/board-ams-delta.h> +#include <mach/mcbsp.h> + +#include "omap-mcbsp.h" +#include "omap-pcm.h" +#include "../codecs/cx20442.h" + + +/* Board specific DAPM widgets */ + const struct snd_soc_dapm_widget ams_delta_dapm_widgets[] = { + /* Handset */ + SND_SOC_DAPM_MIC("Mouthpiece", NULL), + SND_SOC_DAPM_HP("Earpiece", NULL), + /* Handsfree/Speakerphone */ + SND_SOC_DAPM_MIC("Microphone", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), +}; + +/* How they are connected to codec pins */ +static const struct snd_soc_dapm_route ams_delta_audio_map[] = { + {"TELIN", NULL, "Mouthpiece"}, + {"Earpiece", NULL, "TELOUT"}, + + {"MIC", NULL, "Microphone"}, + {"Speaker", NULL, "SPKOUT"}, +}; + +/* + * Controls, functional after the modem line discipline is activated. + */ + +/* Virtual switch: audio input/output constellations */ +static const char *ams_delta_audio_mode[] = + {"Mixed", "Handset", "Handsfree", "Speakerphone"}; + +/* Selection <-> pin translation */ +#define AMS_DELTA_MOUTHPIECE 0 +#define AMS_DELTA_EARPIECE 1 +#define AMS_DELTA_MICROPHONE 2 +#define AMS_DELTA_SPEAKER 3 +#define AMS_DELTA_AGC 4 + +#define AMS_DELTA_MIXED ((1 << AMS_DELTA_EARPIECE) | \ + (1 << AMS_DELTA_MICROPHONE)) +#define AMS_DELTA_HANDSET ((1 << AMS_DELTA_MOUTHPIECE) | \ + (1 << AMS_DELTA_EARPIECE)) +#define AMS_DELTA_HANDSFREE ((1 << AMS_DELTA_MICROPHONE) | \ + (1 << AMS_DELTA_SPEAKER)) +#define AMS_DELTA_SPEAKERPHONE (AMS_DELTA_HANDSFREE | (1 << AMS_DELTA_AGC)) + +unsigned short ams_delta_audio_mode_pins[] = { + AMS_DELTA_MIXED, + AMS_DELTA_HANDSET, + AMS_DELTA_HANDSFREE, + AMS_DELTA_SPEAKERPHONE, +}; + +static unsigned short ams_delta_audio_agc; + +static int ams_delta_set_audio_mode(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct soc_enum *control = (struct soc_enum *)kcontrol->private_value; + unsigned short pins; + int pin, changed = 0; + + /* Refuse any mode changes if we are not able to control the codec. */ + if (!codec->control_data) + return -EUNATCH; + + if (ucontrol->value.enumerated.item[0] >= control->max) + return -EINVAL; + + mutex_lock(&codec->mutex); + + /* Translate selection to bitmap */ + pins = ams_delta_audio_mode_pins[ucontrol->value.enumerated.item[0]]; + + /* Setup pins after corresponding bits if changed */ + pin = !!(pins & (1 << AMS_DELTA_MOUTHPIECE)); + if (pin != snd_soc_dapm_get_pin_status(codec, "Mouthpiece")) { + changed = 1; + if (pin) + snd_soc_dapm_enable_pin(codec, "Mouthpiece"); + else + snd_soc_dapm_disable_pin(codec, "Mouthpiece"); + } + pin = !!(pins & (1 << AMS_DELTA_EARPIECE)); + if (pin != snd_soc_dapm_get_pin_status(codec, "Earpiece")) { + changed = 1; + if (pin) + snd_soc_dapm_enable_pin(codec, "Earpiece"); + else + snd_soc_dapm_disable_pin(codec, "Earpiece"); + } + pin = !!(pins & (1 << AMS_DELTA_MICROPHONE)); + if (pin != snd_soc_dapm_get_pin_status(codec, "Microphone")) { + changed = 1; + if (pin) + snd_soc_dapm_enable_pin(codec, "Microphone"); + else + snd_soc_dapm_disable_pin(codec, "Microphone"); + } + pin = !!(pins & (1 << AMS_DELTA_SPEAKER)); + if (pin != snd_soc_dapm_get_pin_status(codec, "Speaker")) { + changed = 1; + if (pin) + snd_soc_dapm_enable_pin(codec, "Speaker"); + else + snd_soc_dapm_disable_pin(codec, "Speaker"); + } + pin = !!(pins & (1 << AMS_DELTA_AGC)); + if (pin != ams_delta_audio_agc) { + ams_delta_audio_agc = pin; + changed = 1; + if (pin) + snd_soc_dapm_enable_pin(codec, "AGCIN"); + else + snd_soc_dapm_disable_pin(codec, "AGCIN"); + } + if (changed) + snd_soc_dapm_sync(codec); + + mutex_unlock(&codec->mutex); + + return changed; +} + +static int ams_delta_get_audio_mode(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned short pins, mode; + + pins = ((snd_soc_dapm_get_pin_status(codec, "Mouthpiece") << + AMS_DELTA_MOUTHPIECE) | + (snd_soc_dapm_get_pin_status(codec, "Earpiece") << + AMS_DELTA_EARPIECE)); + if (pins) + pins |= (snd_soc_dapm_get_pin_status(codec, "Microphone") << + AMS_DELTA_MICROPHONE); + else + pins = ((snd_soc_dapm_get_pin_status(codec, "Microphone") << + AMS_DELTA_MICROPHONE) | + (snd_soc_dapm_get_pin_status(codec, "Speaker") << + AMS_DELTA_SPEAKER) | + (ams_delta_audio_agc << AMS_DELTA_AGC)); + + for (mode = 0; mode < ARRAY_SIZE(ams_delta_audio_mode); mode++) + if (pins == ams_delta_audio_mode_pins[mode]) + break; + + if (mode >= ARRAY_SIZE(ams_delta_audio_mode)) + return -EINVAL; + + ucontrol->value.enumerated.item[0] = mode; + + return 0; +} + +static const struct soc_enum ams_delta_audio_enum[] = { + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(ams_delta_audio_mode), + ams_delta_audio_mode), +}; + +static const struct snd_kcontrol_new ams_delta_audio_controls[] = { + SOC_ENUM_EXT("Audio Mode", ams_delta_audio_enum[0], + ams_delta_get_audio_mode, ams_delta_set_audio_mode), +}; + +/* Hook switch */ +static struct snd_soc_jack ams_delta_hook_switch; +static struct snd_soc_jack_gpio ams_delta_hook_switch_gpios[] = { + { + .gpio = 4, + .name = "hook_switch", + .report = SND_JACK_HEADSET, + .invert = 1, + .debounce_time = 150, + } +}; + +/* After we are able to control the codec over the modem, + * the hook switch can be used for dynamic DAPM reconfiguration. */ +static struct snd_soc_jack_pin ams_delta_hook_switch_pins[] = { + /* Handset */ + { + .pin = "Mouthpiece", + .mask = SND_JACK_MICROPHONE, + }, + { + .pin = "Earpiece", + .mask = SND_JACK_HEADPHONE, + }, + /* Handsfree */ + { + .pin = "Microphone", + .mask = SND_JACK_MICROPHONE, + .invert = 1, + }, + { + .pin = "Speaker", + .mask = SND_JACK_HEADPHONE, + .invert = 1, + }, +}; + + +/* + * Modem line discipline, required for making above controls functional. + * Activated from userspace with ldattach, possibly invoked from udev rule. + */ + +/* To actually apply any modem controlled configuration changes to the codec, + * we must connect codec DAI pins to the modem for a moment. Be carefull not + * to interfere with our digital mute function that shares the same hardware. */ +static struct timer_list cx81801_timer; +static bool cx81801_cmd_pending; +static bool ams_delta_muted; +static spinlock_t ams_delta_lock = SPIN_LOCK_UNLOCKED; + +static void cx81801_timeout(unsigned long data) +{ + int muted; + + spin_lock(&ams_delta_lock); + cx81801_cmd_pending = 0; + muted = ams_delta_muted; + spin_unlock(&ams_delta_lock); + + /* Reconnect the codec DAI back from the modem to the CPU DAI + * only if digital mute still off */ + if (!muted) + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, 0); +} + +/* Line discipline .open() */ +static int cx81801_open(struct tty_struct *tty) +{ + return v253_ops.open(tty); +} + +/* Line discipline .close() */ +static void cx81801_close(struct tty_struct *tty) +{ + struct snd_soc_codec *codec = tty->disc_data; + + del_timer_sync(&cx81801_timer); + + v253_ops.close(tty); + + /* Prevent the hook switch from further changing the DAPM pins */ + INIT_LIST_HEAD(&ams_delta_hook_switch.pins); + + /* Revert back to default audio input/output constellation */ + snd_soc_dapm_disable_pin(codec, "Mouthpiece"); + snd_soc_dapm_enable_pin(codec, "Earpiece"); + snd_soc_dapm_enable_pin(codec, "Microphone"); + snd_soc_dapm_disable_pin(codec, "Speaker"); + snd_soc_dapm_disable_pin(codec, "AGCIN"); + snd_soc_dapm_sync(codec); +} + +/* Line discipline .hangup() */ +static int cx81801_hangup(struct tty_struct *tty) +{ + cx81801_close(tty); + return 0; +} + +/* Line discipline .recieve_buf() */ +static void cx81801_receive(struct tty_struct *tty, + const unsigned char *cp, char *fp, int count) +{ + struct snd_soc_codec *codec = tty->disc_data; + const unsigned char *c; + int apply, ret; + + if (!codec->control_data) { + /* First modem response, complete setup procedure */ + + /* Initialize timer used for config pulse generation */ + setup_timer(&cx81801_timer, cx81801_timeout, 0); + + v253_ops.receive_buf(tty, cp, fp, count); + + /* Link hook switch to DAPM pins */ + ret = snd_soc_jack_add_pins(&ams_delta_hook_switch, + ARRAY_SIZE(ams_delta_hook_switch_pins), + ams_delta_hook_switch_pins); + if (ret) + dev_warn(codec->socdev->card->dev, + "Failed to link hook switch to DAPM pins, " + "will continue with hook switch unlinked.\n"); + + return; + } + + v253_ops.receive_buf(tty, cp, fp, count); + + for (c = &cp[count - 1]; c >= cp; c--) { + if (*c != '\r') + continue; + /* Complete modem response received, apply config to codec */ + + spin_lock_bh(&ams_delta_lock); + mod_timer(&cx81801_timer, jiffies + msecs_to_jiffies(150)); + apply = !ams_delta_muted && !cx81801_cmd_pending; + cx81801_cmd_pending = 1; + spin_unlock_bh(&ams_delta_lock); + + /* Apply config pulse by connecting the codec to the modem + * if not already done */ + if (apply) + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, + AMS_DELTA_LATCH2_MODEM_CODEC); + break; + } +} + +/* Line discipline .write_wakeup() */ +static void cx81801_wakeup(struct tty_struct *tty) +{ + v253_ops.write_wakeup(tty); +} + +static struct tty_ldisc_ops cx81801_ops = { + .magic = TTY_LDISC_MAGIC, + .name = "cx81801", + .owner = THIS_MODULE, + .open = cx81801_open, + .close = cx81801_close, + .hangup = cx81801_hangup, + .receive_buf = cx81801_receive, + .write_wakeup = cx81801_wakeup, +}; + + +/* + * Even if not very usefull, the sound card can still work without any of the + * above functonality activated. You can still control its audio input/output + * constellation and speakerphone gain from userspace by issueing AT commands + * over the modem port. + */ + +static int ams_delta_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + /* Set cpu DAI configuration */ + return snd_soc_dai_set_fmt(rtd->dai->cpu_dai, + SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); +} + +static struct snd_soc_ops ams_delta_ops = { + .hw_params = ams_delta_hw_params, +}; + + +/* Board specific codec bias level control */ +static int ams_delta_set_bias_level(struct snd_soc_card *card, + enum snd_soc_bias_level level) +{ + struct snd_soc_codec *codec = card->codec; + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET, + AMS_DELTA_LATCH2_MODEM_NRESET); + break; + case SND_SOC_BIAS_OFF: + if (codec->bias_level != SND_SOC_BIAS_OFF) + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET, + 0); + } + codec->bias_level = level; + + return 0; +} + +/* Digital mute implemented using modem/CPU multiplexer. + * Shares hardware with codec config pulse generation */ +static bool ams_delta_muted = 1; + +static int ams_delta_digital_mute(struct snd_soc_dai *dai, int mute) +{ + int apply; + + if (ams_delta_muted == mute) + return 0; + + spin_lock_bh(&ams_delta_lock); + ams_delta_muted = mute; + apply = !cx81801_cmd_pending; + spin_unlock_bh(&ams_delta_lock); + + if (apply) + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, + mute ? AMS_DELTA_LATCH2_MODEM_CODEC : 0); + return 0; +} + +/* Our codec DAI probably doesn't have its own .ops structure */ +static struct snd_soc_dai_ops ams_delta_dai_ops = { + .digital_mute = ams_delta_digital_mute, +}; + +/* Will be used if the codec ever has its own digital_mute function */ +static int ams_delta_startup(struct snd_pcm_substream *substream) +{ + return ams_delta_digital_mute(NULL, 0); +} + +static void ams_delta_shutdown(struct snd_pcm_substream *substream) +{ + ams_delta_digital_mute(NULL, 1); +} + + +/* + * Card initialization + */ + +static int ams_delta_cx20442_init(struct snd_soc_codec *codec) +{ + struct snd_soc_dai *codec_dai = codec->dai; + struct snd_soc_card *card = codec->socdev->card; + int ret; + /* Codec is ready, now add/activate board specific controls */ + + /* Set up digital mute if not provided by the codec */ + if (!codec_dai->ops) { + codec_dai->ops = &ams_delta_dai_ops; + } else if (!codec_dai->ops->digital_mute) { + codec_dai->ops->digital_mute = ams_delta_digital_mute; + } else { + ams_delta_ops.startup = ams_delta_startup; + ams_delta_ops.shutdown = ams_delta_shutdown; + } + + /* Set codec bias level */ + ams_delta_set_bias_level(card, SND_SOC_BIAS_STANDBY); + + /* Add hook switch - can be used to control the codec from userspace + * even if line discipline fails */ + ret = snd_soc_jack_new(card, "hook_switch", + SND_JACK_HEADSET, &ams_delta_hook_switch); + if (ret) + dev_warn(card->dev, + "Failed to allocate resources for hook switch, " + "will continue without one.\n"); + else { + ret = snd_soc_jack_add_gpios(&ams_delta_hook_switch, + ARRAY_SIZE(ams_delta_hook_switch_gpios), + ams_delta_hook_switch_gpios); + if (ret) + dev_warn(card->dev, + "Failed to set up hook switch GPIO line, " + "will continue with hook switch inactive.\n"); + } + + /* Register optional line discipline for over the modem control */ + ret = tty_register_ldisc(N_AMSDELTA, &cx81801_ops); + if (ret) { + dev_warn(card->dev, + "Failed to register line discipline, " + "will continue without any controls.\n"); + return 0; + } + + /* Add board specific DAPM widgets and routes */ + ret = snd_soc_dapm_new_controls(codec, ams_delta_dapm_widgets, + ARRAY_SIZE(ams_delta_dapm_widgets)); + if (ret) { + dev_warn(card->dev, + "Failed to register DAPM controls, " + "will continue without any.\n"); + return 0; + } + + ret = snd_soc_dapm_add_routes(codec, ams_delta_audio_map, + ARRAY_SIZE(ams_delta_audio_map)); + if (ret) { + dev_warn(card->dev, + "Failed to set up DAPM routes, " + "will continue with codec default map.\n"); + return 0; + } + + /* Set up initial pin constellation */ + snd_soc_dapm_disable_pin(codec, "Mouthpiece"); + snd_soc_dapm_enable_pin(codec, "Earpiece"); + snd_soc_dapm_enable_pin(codec, "Microphone"); + snd_soc_dapm_disable_pin(codec, "Speaker"); + snd_soc_dapm_disable_pin(codec, "AGCIN"); + snd_soc_dapm_disable_pin(codec, "AGCOUT"); + snd_soc_dapm_sync(codec); + + /* Add virtual switch */ + ret = snd_soc_add_controls(codec, ams_delta_audio_controls, + ARRAY_SIZE(ams_delta_audio_controls)); + if (ret) + dev_warn(card->dev, + "Failed to register audio mode control, " + "will continue without it.\n"); + + return 0; +} + +/* DAI glue - connects codec <--> CPU */ +static struct snd_soc_dai_link ams_delta_dai_link = { + .name = "CX20442", + .stream_name = "CX20442", + .cpu_dai = &omap_mcbsp_dai[0], + .codec_dai = &cx20442_dai, + .init = ams_delta_cx20442_init, + .ops = &ams_delta_ops, +}; + +/* Audio card driver */ +static struct snd_soc_card ams_delta_audio_card = { + .name = "AMS_DELTA", + .platform = &omap_soc_platform, + .dai_link = &ams_delta_dai_link, + .num_links = 1, + .set_bias_level = ams_delta_set_bias_level, +}; + +/* Audio subsystem */ +static struct snd_soc_device ams_delta_snd_soc_device = { + .card = &ams_delta_audio_card, + .codec_dev = &cx20442_codec_dev, +}; + +/* Module init/exit */ +static struct platform_device *ams_delta_audio_platform_device; +static struct platform_device *cx20442_platform_device; + +static int __init ams_delta_module_init(void) +{ + int ret; + + if (!(machine_is_ams_delta())) + return -ENODEV; + + ams_delta_audio_platform_device = + platform_device_alloc("soc-audio", -1); + if (!ams_delta_audio_platform_device) + return -ENOMEM; + + platform_set_drvdata(ams_delta_audio_platform_device, + &ams_delta_snd_soc_device); + ams_delta_snd_soc_device.dev = &ams_delta_audio_platform_device->dev; + *(unsigned int *)ams_delta_dai_link.cpu_dai->private_data = OMAP_MCBSP1; + + ret = platform_device_add(ams_delta_audio_platform_device); + if (ret) + goto err; + + /* + * Codec platform device could be registered from elsewhere (board?), + * but I do it here as it makes sense only if used with the card. + */ + cx20442_platform_device = platform_device_register_simple("cx20442", + -1, NULL, 0); + return 0; +err: + platform_device_put(ams_delta_audio_platform_device); + return ret; +} +module_init(ams_delta_module_init); + +static void __exit ams_delta_module_exit(void) +{ + struct snd_soc_codec *codec; + struct tty_struct *tty; + + if (ams_delta_audio_card.codec) { + codec = ams_delta_audio_card.codec; + + if (codec->control_data) { + tty = codec->control_data; + + tty_hangup(tty); + } + } + + if (tty_unregister_ldisc(N_AMSDELTA) != 0) + dev_warn(&ams_delta_audio_platform_device->dev, + "failed to unregister AMSDELTA line discipline\n"); + + snd_soc_jack_free_gpios(&ams_delta_hook_switch, + ARRAY_SIZE(ams_delta_hook_switch_gpios), + ams_delta_hook_switch_gpios); + + /* Keep modem power on */ + ams_delta_set_bias_level(&ams_delta_audio_card, SND_SOC_BIAS_STANDBY); + + platform_device_unregister(cx20442_platform_device); + platform_device_unregister(ams_delta_audio_platform_device); +} +module_exit(ams_delta_module_exit); + +MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl>"); +MODULE_DESCRIPTION("ALSA SoC driver for Amstrad E3 (Delta) videophone"); +MODULE_LICENSE("GPL");

3 4

[RFC] [PATCH 1/3] ASoC: Add support for Conexant CX20442-11 voice modem codec
by Janusz Krzysztofik 28 Jul '09

28 Jul '09

This patch adds support for Conexant CX20442-11 voice modem codec, suitable for use by the ASoC board driver for Amstrad E3 (Delta) videophone. Related sound card driver will follow. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> --- This codec is an optional part of the Conexant SmartV three chip modem design. As such, documentation for its proprietary digital audio interface is not available. However, on Amstrad Delta board, thanks to Mark Underwood who created an initial, omap-alsa based sound driver a few years ago[1], the codec has been discovered to be accessible not only from the modem side, but also over the OMAP McBSP based CPU DAI. Thus, the driver can be used by any sound card that can access the codec DAI directly. The DAI configuration parameters (sample rate and format, number of channels) has been selected out empirically for best user experience. The codec analogue interface consists of two pairs of analogue I/O pins: speakerphone interface or telephone handset/headset interface. Furthermore, it seams to provide two operation modes for speakerphone I/O: standard and advanced, with automatic gain control and echo cancelation. Even if the codec control interface is unknown and not available, all those interfaces and modes can be selected over the modem chip using V.253 commands. The driver is able to issue necessary commands over a suitable hw_write function if provided by a sound card driver. Otherwise, the codec can be controlled over the modem from userspace while inactive. Even if nothig is known about the codec internal power management capabilities, DAPM widgets has been used to model the codec audio map. Automatically performed powering up/down of those virtual widgets results in corresponding V.253 commands being issued. Some driver features/oddities may be board specific, but I have no way to verify that with any board other than Amstrad Delta. [1] http://www.earth.li/pipermail/e3-hacking/2006-April/000481.html --- linux-2.6.31-rc1/sound/soc/codecs/Kconfig.orig 2009-07-04 16:40:00.000000000 +0200 +++ linux-2.6.31-rc1/sound/soc/codecs/Kconfig 2009-07-22 01:01:08.000000000 +0200 @@ -17,6 +17,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_AK4104 if SPI_MASTER select SND_SOC_AK4535 if I2C select SND_SOC_CS4270 if I2C + select SND_SOC_CX20442 select SND_SOC_PCM3008 select SND_SOC_SPDIF select SND_SOC_SSM2602 if I2C @@ -86,6 +87,9 @@ config SND_SOC_CS4270_VD33_ERRATA bool depends on SND_SOC_CS4270 +config SND_SOC_CX20442 + tristate + config SND_SOC_L3 tristate --- linux-2.6.31-rc1/sound/soc/codecs/Makefile.orig 2009-07-04 16:40:00.000000000 +0200 +++ linux-2.6.31-rc1/sound/soc/codecs/Makefile 2009-07-22 01:01:08.000000000 +0200 @@ -4,6 +4,7 @@ snd-soc-ad73311-objs := ad73311.o snd-soc-ak4104-objs := ak4104.o snd-soc-ak4535-objs := ak4535.o snd-soc-cs4270-objs := cs4270.o +snd-soc-cx20442-objs := cx20442.o snd-soc-l3-objs := l3.o snd-soc-pcm3008-objs := pcm3008.o snd-soc-spdif-objs := spdif_transciever.o @@ -41,6 +42,7 @@ obj-$(CONFIG_SND_SOC_AD73311) += snd-soc obj-$(CONFIG_SND_SOC_AK4104) += snd-soc-ak4104.o obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o +obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif.o --- /dev/null 2009-06-24 10:33:03.437003511 +0200 +++ linux-2.6.31-rc1/sound/soc/codecs/cx20442.h 2009-07-22 01:01:08.000000000 +0200 @@ -0,0 +1,19 @@ +/* + * cx20442.h -- audio driver for CX20442 + * + * Copyright 2009 Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _CX20442_CODEC_H +#define _CX20442_CODEC_H + +extern struct snd_soc_dai cx20442_dai; +extern struct snd_soc_codec_device cx20442_codec_dev; + +#endif --- /dev/null 2009-06-24 10:33:03.437003511 +0200 +++ linux-2.6.31-rc1/sound/soc/codecs/cx20442.c 2009-07-22 01:01:08.000000000 +0200 @@ -0,0 +1,395 @@ +/* + * cx20442.c -- CX20442 ALSA Soc Audio driver + * + * Copyright 2009 Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> + * + * Initially based on sound/soc/codecs/wm8400.c + * Copyright 2008, 2009 Wolfson Microelectronics PLC. + * Author: Mark Brown <broonie(a)opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <sound/core.h> +#include <sound/initval.h> +#include <sound/soc-dapm.h> + +#include "cx20442.h" + + +struct cx20442_priv { + struct snd_soc_codec codec; + u8 reg_cache[1]; +}; + +#define CX20442_PM 0x0 + +#define CX20442_TELIN 0 +#define CX20442_TELOUT 1 +#define CX20442_MIC 2 +#define CX20442_SPKOUT 3 +#define CX20442_AGC 4 + +static const struct snd_soc_dapm_widget cx20442_dapm_widgets[] = { + SND_SOC_DAPM_OUTPUT("TELOUT"), + SND_SOC_DAPM_OUTPUT("SPKOUT"), + SND_SOC_DAPM_OUTPUT("AGCOUT"), + + SND_SOC_DAPM_MIXER("SPKOUT Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), + + SND_SOC_DAPM_PGA("TELOUT Amp", CX20442_PM, CX20442_TELOUT, 0, NULL, 0), + SND_SOC_DAPM_PGA("SPKOUT Amp", CX20442_PM, CX20442_SPKOUT, 0, NULL, 0), + SND_SOC_DAPM_PGA("SPKOUT AGC", CX20442_PM, CX20442_AGC, 0, NULL, 0), + + SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_MIXER("Input Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), + + SND_SOC_DAPM_MICBIAS("TELIN Bias", CX20442_PM, CX20442_TELIN, 0), + SND_SOC_DAPM_MICBIAS("MIC Bias", CX20442_PM, CX20442_MIC, 0), + + SND_SOC_DAPM_PGA("MIC AGC", CX20442_PM, CX20442_AGC, 0, NULL, 0), + + SND_SOC_DAPM_INPUT("TELIN"), + SND_SOC_DAPM_INPUT("MIC"), + SND_SOC_DAPM_INPUT("AGCIN"), +}; + +static const struct snd_soc_dapm_route cx20442_audio_map[] = { + {"TELOUT", NULL, "TELOUT Amp"}, + + {"SPKOUT", NULL, "SPKOUT Mixer"}, + {"SPKOUT Mixer", NULL, "SPKOUT Amp"}, + + {"TELOUT Amp", NULL, "DAC"}, + {"SPKOUT Amp", NULL, "DAC"}, + + {"SPKOUT Mixer", NULL, "SPKOUT AGC"}, + {"SPKOUT AGC", NULL, "AGCIN"}, + + {"AGCOUT", NULL, "MIC AGC"}, + {"MIC AGC", NULL, "MIC"}, + + {"MIC Bias", NULL, "MIC"}, + {"Input Mixer", NULL, "MIC Bias"}, + + {"TELIN Bias", NULL, "TELIN"}, + {"Input Mixer", NULL, "TELIN Bias"}, + + {"ADC", NULL, "Input Mixer"}, +}; + +static int cx20442_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, cx20442_dapm_widgets, + ARRAY_SIZE(cx20442_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, cx20442_audio_map, + ARRAY_SIZE(cx20442_audio_map)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +static unsigned int cx20442_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u8 *reg_cache = codec->reg_cache; + + if (reg >= codec->reg_cache_size) + return -EINVAL; + + return reg_cache[reg]; +} + +enum v253_vls { + V253_VLS_NONE = 0, + V253_VLS_T, + V253_VLS_L, + V253_VLS_LT, + V253_VLS_S, + V253_VLS_ST, + V253_VLS_M, + V253_VLS_MST, + V253_VLS_S1, + V253_VLS_S1T, + V253_VLS_MS1T, + V253_VLS_M1, + V253_VLS_M1ST, + V253_VLS_M1S1T, + V253_VLS_H, + V253_VLS_HT, + V253_VLS_MS, + V253_VLS_MS1, + V253_VLS_M1S, + V253_VLS_M1S1, + V253_VLS_TEST, +}; + +static int cx20442_pm_to_v253_vls(u8 value) +{ + switch(value & ~(1 << CX20442_AGC)) { + case 0: + return V253_VLS_T; + case (1 << CX20442_SPKOUT): + return V253_VLS_S1; + case (1 << CX20442_MIC): + return V253_VLS_M1; + case (1 << CX20442_SPKOUT) | (1 << CX20442_MIC): + return V253_VLS_M1S1; + case (1 << CX20442_TELOUT): + case (1 << CX20442_TELIN): + case (1 << CX20442_TELOUT) | (1 << CX20442_TELIN): + return V253_VLS_L; + case (1 << CX20442_TELOUT) | (1 << CX20442_MIC): + return V253_VLS_NONE; + } + return -EINVAL; +} +static int cx20442_pm_to_v253_vsp(u8 value) +{ + switch(value & ~(1 << CX20442_AGC)) { + case (1 << CX20442_SPKOUT): + case (1 << CX20442_MIC): + case (1 << CX20442_SPKOUT) | (1 << CX20442_MIC): + return (bool)(value & (1 << CX20442_AGC)); + } + return (value & (1 << CX20442_AGC)) ? -EINVAL : 0; +} + +static int cx20442_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 *reg_cache = codec->reg_cache; + int vls, vsp, old, len; + char buf[18]; + + if (reg >= codec->reg_cache_size) + return -EINVAL; + + if (!codec->hw_write || !codec->control_data) + return -EIO; + + old = reg_cache[reg]; + reg_cache[reg] = value; + + vls = cx20442_pm_to_v253_vls(value); + if (vls < 0) + return vls; + + vsp = cx20442_pm_to_v253_vsp(value); + if (vsp < 0 ) + return vsp; + + if ((vls == V253_VLS_T) || + (vls == cx20442_pm_to_v253_vls(old))) { + if (vsp == cx20442_pm_to_v253_vsp(old)) + return 0; + len = snprintf(buf, ARRAY_SIZE(buf), "at+vsp=%d\r", vsp); + } else if (vsp == cx20442_pm_to_v253_vsp(old)) + len = snprintf(buf, ARRAY_SIZE(buf), "at+vls=%d\r", vls); + else + len = snprintf(buf, ARRAY_SIZE(buf), + "at+vls=%d;+vsp=%d\r", vls, vsp); + + if (unlikely(len > (ARRAY_SIZE(buf) - 1))) + return -ENOMEM; + + if (codec->hw_write(codec->control_data, buf, len) != len) + return -EIO; + + return 0; +} + +struct snd_soc_dai cx20442_dai = { + .name = "CX20442", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}; +EXPORT_SYMBOL_GPL(cx20442_dai); + +static struct snd_soc_codec *cx20442_codec; + +static int cx20442_codec_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret; + + if(!cx20442_codec) { + dev_err(&pdev->dev, "cx20442 not yet discovered\n"); + return -ENODEV; + } + codec = cx20442_codec; + + socdev->card->codec = codec; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(&pdev->dev, "failed to create pcms\n"); + goto pcm_err; + } + + cx20442_add_widgets(codec); + + ret = snd_soc_init_card(socdev); + if (ret < 0) { + dev_err(&pdev->dev, "failed to register card\n"); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + return ret; +} + +/* power down chip */ +static int cx20442_codec_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device cx20442_codec_dev = { + .probe = cx20442_codec_probe, + .remove = cx20442_codec_remove, +}; +EXPORT_SYMBOL_GPL(cx20442_codec_dev); + +static int cx20442_register(struct cx20442_priv *cx20442) +{ + struct snd_soc_codec *codec = &cx20442->codec; + int ret; + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->name = "CX20442"; + codec->owner = THIS_MODULE; + codec->private_data = cx20442; + + codec->dai = &cx20442_dai; + codec->num_dai = 1; + + codec->reg_cache = &cx20442->reg_cache; + codec->reg_cache_size = ARRAY_SIZE(cx20442->reg_cache); + codec->read = cx20442_read_reg_cache; + codec->write = cx20442_write; + + codec->bias_level = SND_SOC_BIAS_OFF; + + cx20442_dai.dev = codec->dev; + + cx20442_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + //dev_err(&dev->dev, "Failed to register codec: %d\n", ret); + goto err; + } + + ret = snd_soc_register_dai(&cx20442_dai); + if (ret != 0) { + //dev_err(&dev->dev, "Failed to register DAI: %d\n", ret); + goto err_codec; + } + + return 0; + +err_codec: + snd_soc_unregister_codec(codec); +err: + cx20442_codec = NULL; + kfree(cx20442); + return ret; +} + +static void cx20442_unregister(struct cx20442_priv *cx20442) +{ + snd_soc_unregister_dai(&cx20442_dai); + snd_soc_unregister_codec(&cx20442->codec); + + cx20442_codec = NULL; + kfree(cx20442); +} + +static int cx20442_platform_probe(struct platform_device *pdev) +{ + struct cx20442_priv *cx20442; + struct snd_soc_codec *codec; + + cx20442 = kzalloc(sizeof(struct cx20442_priv), GFP_KERNEL); + if (cx20442 == NULL) + return -ENOMEM; + + codec = &cx20442->codec; + + codec->control_data = NULL; + codec->hw_write = NULL; + codec->pop_time = 0; + + codec->dev = &pdev->dev; + platform_set_drvdata(pdev, cx20442); + + return cx20442_register(cx20442); +} + +static int __exit cx20442_platform_remove(struct platform_device *pdev) +{ + struct cx20442_priv *cx20442 = platform_get_drvdata(pdev); + + cx20442_unregister(cx20442); + return 0; +} + +static struct platform_driver cx20442_platform_driver = { + .driver = { + .name = "cx20442", + .owner = THIS_MODULE, + }, + .probe = cx20442_platform_probe, + .remove = __exit_p(cx20442_platform_remove), +}; + +static int __init cx20442_init(void) +{ + return platform_driver_register(&cx20442_platform_driver); +} +module_init(cx20442_init); + +static void __exit cx20442_exit(void) +{ + platform_driver_unregister(&cx20442_platform_driver); +} +module_exit(cx20442_exit); + +MODULE_DESCRIPTION("ASoC CX20442-11 voice modem codec driver"); +MODULE_AUTHOR("Janusz Krzysztofik"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cx20442-codec");

2 8

← Newer
1
...
6
7
8
9
10
11
12
...
40
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

e3-hacking