e3-hacking March 2017

e3-hacking@earth.li

1 participants
2 discussions

Re: [E3-hacking] Just got an e3 - where do I start
by Antony Stone 05 Apr '19

05 Apr '19

On Wednesday 27 June 2012 at 00:17, Edward Robbins wrote: > Sorry for 3rd email... > > Using a 9V supply the emailer appears to start - email and voice lights > flash, then after some time the power light comes on when I press power, > and camera light comes on when I then press video, but the LCD does not > come on. So I suspect that amstrad were being cheap in choosing such a high > voltage PSU - because they didn't want to include a backlight inverter to > boost the voltage for the LCD backlight. I thus further suspect that I can > still talk to the serial port without the full voltage input... so if I > build a cable, is there a way I can tell which PBL I have from the serial > output? See the first line of http://www.earth.li/%7Enoodles/files/delta.boot (linked from http://www.earth.li/~noodles/hardware-e3.html). Hope this helps, Antony. -- All generalisations are inaccurate. -- I'm not impossible, just highly implausible. Please reply to the list; please don't CC me.

6 18

E3 final update wanted for my E3s
by Paul Toghill 29 Mar '17

29 Mar '17

Hello all, I have two E3s which require the final software update of which can be transferred to them via the Pocket Dockit. The final update was sent to all Emailers in 2011. Does anybody have a working E3 with this final update? I have an EM1000 and EM2001 of which both have been updated this way. I can send you a Dockit for you to transfer the set up date to and I could transfer it to my two so they work as normal telephones. Thank you in anticipation as I would like my E3s to work normally without shutting themselves down. Regards from Paul Toghill.

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

e3-hacking March 2017