e3-hacking April 2007

e3-hacking@earth.li

4 participants
2 discussions

Native build environment
by Martin Whitaker 15 Jul '07

15 Jul '07

Hi Folks, In response to the people asking how I built libspectrum / fuse, and in response to a few people who've asked me (outside of this mailing list) how to get started building applications for the E3 I've put together a 'how-to'. This 'how-to' caters for both Windows-only and Linux users and is aimed at people without a huge amount of Linux experience who don't want to deal with the hassle of cross compiling. I'm not saying cross compiling isn't the best way of doing it, I'm just giving an alternative. The location of the guide is: http://www.whitakernet.com/e3/ There is also a link to a quick 'how-to' specific to building libspectrum and Fuse, which includes the nasty hacks I did to it to get it running on the E3 (sorry Phil - I never did get chance to tidy it up!). I'd appreciate feedback from anyone who uses this system, there are almost certainly still problems with it so do let me know when things either do or don't work. Regards, Martin. -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.6/708 - Release Date: 02/03/2007 16:19

3 5

Newbie networking problems
by Andy Collins 24 Apr '07

24 Apr '07

Hi Folks, I've just received my first E3 and I'm cramming up on the info trying to get going. I've followed the info in the wiki about getting started and I get boot it up over the serial port now without a problem. My next milestone is to get t nrtworking and this is where I'm coming adrift. I've got a USB-ethernet adapter that is based on the ADM8515 chipset. When I plug it in I see... usb 1-1: new full speed USB device using ohci and address 3 usb 1-1: configuration #1 chosen from 1 choice and that's all. I think that the driver for the Pegasus will work with this chipset (though I may be wrong). dmesg gives me the following with regard to networking... usbcore: registered new driver catc drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver usbcore: registered new driver kaweth pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new driver pegasus drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27) usbcore: registered new driver rtl8150 So that's as far as I've got. I can't see /dev/eth0, which I would expect. ifconfig just shows my loopback device (should it show more?) Please folks, what do I need to do next to get in on the network? Thanks. Andy.

4 4

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

e3-hacking April 2007