This patch extends the LED backlight tirgger driver with an option that allows
for inverting the trigger output polarity.
Whith the invertion option provided, I (ab)use the backlight trigger for
driving a led that indicates LCD display blank condtition on my Amstrad Delta
videophone. Since the machine has no dedicated power LED, it was not possible
to distinguish if its display was blanked or it was turned off, without
touching it.
The invert sysfs control is modeled after a similiar function provided by the
gpio trigger driver.
Created and tested against linux-2.6.35-rc3 on Amstrad Delta.
Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl>
---
diff -uprN git/drivers/leds/ledtrig-backlight.c
git/drivers/leds/ledtrig-backlight.c
--- git/drivers/leds/ledtrig-backlight.c 2010-06-15 18:01:50.000000000 +0200
+++ git/drivers/leds/ledtrig-backlight.c 2010-06-23 02:48:44.000000000 +0200
@@ -26,6 +26,7 @@ struct bl_trig_notifier {
int brightness;
int old_status;
struct notifier_block notifier;
+ unsigned invert;
};
static int fb_notifier_callback(struct notifier_block *p,
@@ -39,13 +40,15 @@ static int fb_notifier_callback(struct n
switch (event) {
case FB_EVENT_BLANK :
- if (*blank && n->old_status == UNBLANK) {
+ if ((!n->invert && *blank && n->old_status == UNBLANK) ||
+ (n->invert && !*blank && n->old_status == BLANK)) {
n->brightness = led->brightness;
led_set_brightness(led, LED_OFF);
- n->old_status = BLANK;
- } else if (!*blank && n->old_status == BLANK) {
+ n->old_status = n->invert ? UNBLANK : BLANK;
+ } else if ((!n->invert && !*blank && n->old_status == BLANK) ||
+ (n->invert && *blank && n->old_status == UNBLANK)) {
led_set_brightness(led, n->brightness);
- n->old_status = UNBLANK;
+ n->old_status = n->invert ? BLANK : UNBLANK;
}
break;
}
@@ -53,6 +56,43 @@ static int fb_notifier_callback(struct n
return 0;
}
+static ssize_t bl_trig_invert_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct bl_trig_notifier *n = led->trigger_data;
+
+ return sprintf(buf, "%s\n", n->invert ? "yes" : "no");
+}
+
+static ssize_t bl_trig_invert_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t num)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct bl_trig_notifier *n = led->trigger_data;
+ unsigned invert;
+ int ret;
+
+ ret = sscanf(buf, "%u", &invert);
+ if (ret < 1) {
+ dev_err(dev, "invalid value\n");
+ return -EINVAL;
+ }
+
+ n->invert = !!invert;
+
+ /* After inverting, we need to update the LED. */
+ if ((!n->invert && n->old_status == UNBLANK) ||
+ (n->invert && n->old_status == BLANK))
+ led_set_brightness(led, n->brightness);
+ else if ((!n->invert && n->old_status == BLANK) ||
+ (n->invert && n->old_status == UNBLANK))
+ led_set_brightness(led, LED_OFF);
+
+ return num;
+}
+static DEVICE_ATTR(invert, 0644, bl_trig_invert_show, bl_trig_invert_store);
+
static void bl_trig_activate(struct led_classdev *led)
{
int ret;
@@ -66,6 +106,10 @@ static void bl_trig_activate(struct led_
return;
}
+ ret = device_create_file(led->dev, &dev_attr_invert);
+ if (ret)
+ goto err_invert;
+
n->led = led;
n->brightness = led->brightness;
n->old_status = UNBLANK;
@@ -74,6 +118,12 @@ static void bl_trig_activate(struct led_
ret = fb_register_client(&n->notifier);
if (ret)
dev_err(led->dev, "unable to register backlight trigger\n");
+
+ return;
+
+err_invert:
+ led->trigger_data = NULL;
+ kfree(n);
}
static void bl_trig_deactivate(struct led_classdev *led)
@@ -82,6 +132,7 @@ static void bl_trig_deactivate(struct le
(struct bl_trig_notifier *) led->trigger_data;
if (n) {
+ device_remove_file(led->dev, &dev_attr_invert);
fb_unregister_client(&n->notifier);
kfree(n);
}