e3-hacking

e3-hacking@earth.li

395 discussions

Greetings - and two questions
by David J. Singer 29 Mar '06

29 Mar '06

Hi all. Just picked up an E3 on ebay for £20. I'm really impressed with the progress that's been made so far on hacking this puppy. I have experience with Linux, embedded systems and hardware design, so am looking forward to having a play! I've had a look through the archives, and on the web, so apologies if these questions have obvious answers, but: 1. Is it possible to save the original firmware image so as to return the phone to "factory defaults" should it ever be necessary... 2. Is there a "howto", or any step by step documentation covering the current state of play as regards getting new builds onto the device, etc. I'm having little trouble figuring out what's what from the various sources of information. Keep up the good work :) -- David J. Singer "Time flies like an arrow, fruit flies like a banana"

1 0

PBL 5.1
by Otaku 27 Mar '06

27 Mar '06

Could someone with an E3 running this version of PBL possibly do me a favour : Send a command 0x15 ( I don't think it takes any params ), and let me know what the response is : it should be 4 bytes.. Cheers Jake

2 1

PBL 5.1 (again)
by Otaku 27 Mar '06

27 Mar '06

Oh, and FYI - the only "open" pbl commsnds are now : 0x02, 0x09,0x15,0x16 The others appear to require some sort of prior setup/handshake - I'm chosing to assume thats what 0x15 & 0x16 are for.. Jake

1 0

PBL 5.1
by David Ford 26 Mar '06

26 Mar '06

Hello, I'm wondering whether anyone here has had any success with getting U-Boot working on an E3 with PBL 5.1 on it? I have got it to succesfully upload U-Boot onto it using pbltool linux.pbl, however I get no response when it attempts to load the serial terminal, and it appears from reloading pbltool that it has not executed the code, as pbl is still running. Thanks David

1 0

RE: [E3-hacking] Mass storage on the E3
by Cliff Lawson 24 Mar '06

24 Mar '06

Yup, I guess it depends what you are actually hoping to use the E3+Linux for but if it is for locally run GUI apps and a GUI desktop then we've ported both Microwindows and also OPIE (http://opie.handhelds.org/cgi-bin/moin.cgi/) on a QTembedded base to the E3 and both run very nicely. The latter gives you the mini-KDE/Gnome experience with lots of little GUI applets and works well with both our keyboard and mouse support (if maybe a little SLOWLY!) Cliff > -----Original Message----- > From: Don Alexander [mailto:pik-dev@roosoft.ltd.uk] > > Umm maybe I am just being a bit naive about all this but is there any > reason one cannot use Nano-X (http://www.microwindows.org/) seems to > work of other platforms? This e-mail and any attachments are confidential and intended exclusively for the addressee. If you are not the intended recipient please delete it from your system and notify the sender immediately. This message is attributed to the sender and may not necessarily reflect the views of Amstrad Plc or its subsidiaries. For further information on Amstrad Plc please visit our website: www.amstrad.com Amstrad Plc. Brentwood House 169 Kings Road Brentwood Essex CM14 4EF Registered in England : No. 955321

1 0

Mass storage on the E3
by David Given 22 Mar '06

22 Mar '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Say I want to do something real using the E3. The hardware's certainly up to it, and the form factor is great, but as soon as I start doing anything using serious software (such as Debian), I'm going to run out of RAM. So, I'm going to need swap space. Are there any alternatives to plugging in a USB1 hard disk, sharing the single port with all my other devices? While I have, in the past, used Sun workstations that swapped over a 10Mbps ethernet cable with roughly similar bandwidth to that USB port, it wasn't a pleasant experience. It would be really nice to be able to get hold of some higher-bandwidth conduit. Even just being able to dedicate a complete USB1 port rather than having to share would be an improvement; the boot logs say that there are three ports --- are any of them brought out to headers on the motherboard? Failing that, any other suggestions? - -- +- David Given --McQ-+ | dg(a)cowlark.com | "Those that repeat truisms, are also forced to | (dg(a)tao-group.com) | repeat them." --- Anonymous from Slashdot +- www.cowlark.com --+ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEIEXXf9E0noFvlzgRAgYvAJwKbJtKe7d7km6UWg/Obxb5nY/YmACglbpd 7pbvjavV2xwYACMvOYQxZXc= =otbv -----END PGP SIGNATURE-----

6 11

Re: [E3-hacking] wiki
by Matt Callow 22 Mar '06

22 Mar '06

> > I've created a wiki for e3 info. > > http://e3-hacking.wikispaces.com/ After some discussion, now moved to http://wiki.earth.li/E3

1 0

[PATCH] Add support for Amstrad Delta (E3) Videophone
by Jonathan McDowell 22 Mar '06

22 Mar '06

This patch adds support for the Amstrad Delta (E3) Videophone. This is an OMAP5910 based device, which you can find more details about at: http://www.amstrad.com/products/emailers/e3.html http://www.earth.li/~noodles/hardware-e3.html Patch is against latest git://source.mvista.com/git/linux-omap-2.6 and adds the bare minimum of support for the device; I have a handful of other patches to sort out the NAND, LCD, keymap and USB but they all depend on this one. Signed-Off-By: Jonathan McDowell <noodles(a)earth.li> ----- diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig new file mode 100644 index 0000000..03f02dd --- /dev/null +++ b/arch/arm/configs/ams_delta_defconfig @@ -0,0 +1,880 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-omap1 +# Wed Mar 22 10:53:48 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +CONFIG_MACH_AMS_DELTA=y +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_168MHZ is not set +CONFIG_OMAP_ARM_150MHZ=y +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_OMAP_DSP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M" +# CONFIG_XIP_KERNEL is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +CONFIG_OMAP_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_OMAP=y + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Synchronous Serial Interfaces (SSI) +# +# CONFIG_OMAP_UWIRE is not set +# CONFIG_OMAP_TSC2101 is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 0cad7be..fc7d3ce 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -87,6 +87,13 @@ config MACH_NOKIA770 Support for the Nokia 770 Internet Tablet. Say Y here if you have such a device. +config MACH_AMS_DELTA + bool "Amstrad E3 (Delta)" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Amstrad E3 (codename Delta) videophone. Say Y here + if you have such a device. + config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 5e0e023..9ea7195 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_MACH_OMAP_H3) += board-h3. obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o +obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c new file mode 100644 index 0000000..6178f04 --- /dev/null +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -0,0 +1,116 @@ +/* + * linux/arch/arm/mach-omap1/board-ams-delta.c + * + * Modified from board-generic.c + * + * Board specific inits for the Amstrad E3 (codename Delta) videophone + * + * Copyright (C) 2006 Jonathan McDowell <noodles(a)earth.li> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/board-ams-delta.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> + +static u8 ams_delta_latch1_reg; +static u16 ams_delta_latch2_reg; + +void ams_delta_latch1_write(u8 mask, u8 value) +{ + ams_delta_latch1_reg &= ~mask; + ams_delta_latch1_reg |= value; + *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg; +} + +void ams_delta_latch2_write(u16 mask, u16 value) +{ + ams_delta_latch2_reg &= ~mask; + ams_delta_latch2_reg |= value; + *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; +} + +static void __init ams_delta_init_irq(void) +{ + omap1_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct map_desc ams_delta_io_desc[] __initdata = { + // AMS_DELTA_LATCH1 + { + .virtual = AMS_DELTA_LATCH1_VIRT, + .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + }, + // AMS_DELTA_LATCH2 + { + .virtual = AMS_DELTA_LATCH2_VIRT, + .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + }, + // AMS_DELTA_MODEM + { + .virtual = AMS_DELTA_MODEM_VIRT, + .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + } +}; + +static struct omap_uart_config ams_delta_uart_config __initdata = { + .enabled_uarts = 1, +}; + +static struct omap_board_config_kernel ams_delta_config[] = { + { OMAP_TAG_UART, &ams_delta_uart_config }, +}; + +static void __init ams_delta_init(void) +{ + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); + + omap_board_config = ams_delta_config; + omap_board_config_size = ARRAY_SIZE(ams_delta_config); + omap_serial_init(); + + /* Clear latch2 (NAND, LCD, modem enable) */ + ams_delta_latch2_write(~0, 0); +} + +static void __init ams_delta_map_io(void) +{ + omap1_map_common_io(); +} + +MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") + /* Maintainer: Jonathan McDowell <noodles(a)earth.li> */ + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = ams_delta_map_io, + .init_irq = ams_delta_init_irq, + .init_machine = ams_delta_init, + .timer = &omap_timer, +MACHINE_END + +EXPORT_SYMBOL(ams_delta_latch1_write); +EXPORT_SYMBOL(ams_delta_latch2_write); diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/include/asm-arm/arch-omap/board-ams-delta.h new file mode 100644 index 0000000..88bb3c6 --- /dev/null +++ b/include/asm-arm/arch-omap/board-ams-delta.h @@ -0,0 +1,65 @@ +/* + * linux/include/asm-arm/arch-omap/board-ams-delta.h + * + * Copyright (C) 2006 Jonathan McDowell <noodles(a)earth.li> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H +#define __ASM_ARCH_OMAP_AMS_DELTA_H + +#if defined (CONFIG_MACH_AMS_DELTA) + +#define AMS_DELTA_LATCH1_PHYS 0x01000000 +#define AMS_DELTA_LATCH1_VIRT 0xEA000000 +#define AMS_DELTA_MODEM_PHYS 0x04000000 +#define AMS_DELTA_MODEM_VIRT 0xEB000000 +#define AMS_DELTA_LATCH2_PHYS 0x08000000 +#define AMS_DELTA_LATCH2_VIRT 0xEC000000 + +#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 +#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 +#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 +#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 +#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 +#define AMS_DELTA_LATCH1_LED_VOICE 0x20 + +#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 +#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 +#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 +#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 +#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 +#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 +#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 +#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 +#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 +#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 + +#define AMS_DELTA_GPIO_PIN_NAND_RB 12 + +#ifndef __ASSEMBLY__ +void ams_delta_latch1_write(u8 mask, u8 value); +void ams_delta_latch2_write(u16 mask, u16 value); +#endif + +#endif /* CONFIG_MACH_AMS_DELTA */ + +#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */ ----- J. -- "Making the impossible very | .''`. Debian GNU/Linux Developer difficult" -- The OpenGALEN | : :' : Happy to accept PGP signed website. | `. `' or encrypted mail - RSA + | `- DSA keys on the keyservers.

1 0

u-boot with NAND support
by Jonathan McDowell 21 Mar '06

21 Mar '06

I've finally uploaded my u-boot patch with NAND support. It's at: http://the.earth.li/pub/e3/2.6.15/u-boot-e3-20060321.diff with a precompiled image at: http://the.earth.li/pub/e3/2.6.15/u-boot.bin It also changes the processor to be the correct 925t rather than 926 based one, but this seems to have slowed down the boot a lot. Also the NAND support is really slow; for some reason I can't get the support for the NAND ready bit (on GPIO 12 I believe) to work, though it seems fine for the kernel. I haven't had a chance to further look at getting PBL loading u-boot from NAND, but I hope to play over the weekend. J. -- jid: noodles(a)jabber.earth.li 101 things you can't have too much of : 16 - Time.

1 0

Mass storage on the E3
by tolly＠bigredshed.co.uk 21 Mar '06

21 Mar '06

>... >Your project will not end happily. Is there no harm in trying - its not exactly a safety critical system? Tolly

2 1

← Newer
1
...
23
24
25
26
27
28
29
...
40
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

e3-hacking