Can someone running the 2.6 kernel try pushing the q and j keys on their E3 keyboard (the one on the device, not the mailboard) and let me know if they get any output like:
omap-keypad: Spurious key event x-y
where x and y are numbers? I'm wondering if I've messed a cable up putting mine back together or if it just has something odd for some of the keys.
Pressing 'q' gives me
omap-keypad: Spurious key event 4-3 omap-keypad: Spurious key event 4-3
Pressing 'j' gives me
omap-keypad: Spurious key event 4-5 omap-keypad: Spurious key event 4-5
the 1st event in each case occurs when the key is pressed, the 2nd occurs after a short delay
Every other key I tried gave a simlar response (with different values of x and y)
Matt
On Sun, Feb 26, 2006 at 05:47:31PM +0000, Matt Callow wrote:
Can someone running the 2.6 kernel try pushing the q and j keys on their E3 keyboard (the one on the device, not the mailboard) and let me know if they get any output like:
omap-keypad: Spurious key event x-y
where x and y are numbers? I'm wondering if I've messed a cable up putting mine back together or if it just has something odd for some of the keys.
Pressing 'q' gives me
omap-keypad: Spurious key event 4-3 omap-keypad: Spurious key event 4-3
Pressing 'j' gives me
omap-keypad: Spurious key event 4-5 omap-keypad: Spurious key event 4-5
the 1st event in each case occurs when the key is pressed, the 2nd occurs after a short delay
Every other key I tried gave a simlar response (with different values of x and y)
Great. Sounds like I just need to reset my cables and then I can finish the keymap.
J.
On Sun, Feb 26, 2006 at 05:54:26PM +0000, Jonathan McDowell wrote:
On Sun, Feb 26, 2006 at 05:47:31PM +0000, Matt Callow wrote:
Can someone running the 2.6 kernel try pushing the q and j keys on their E3 keyboard (the one on the device, not the mailboard) and let me know if they get any output like:
omap-keypad: Spurious key event x-y
where x and y are numbers? I'm wondering if I've messed a cable up putting mine back together or if it just has something odd for some of the keys.
Pressing 'q' gives me
omap-keypad: Spurious key event 4-3 omap-keypad: Spurious key event 4-3
...
Great. Sounds like I just need to reset my cables and then I can finish the keymap.
Or, actually, it was more simple and I'd just forgotten the terminating 0 on the keymap table.
http://the.earth.li/pub/e3/delta-20060227.diff
is my updated patch against Mark's initial patch.
Main features are:
* A more fully mapped omap-keypad table - all the letters and the numbers on the keypad should work now (any idea how to test this? I couldn't see a /dev file to easily ready to be sure it was outputting the right things.) * NAND flash driver - the mtd partitions table is still in flux, but I have / mounted off a jffs2 partition on my E3 now. Note that doing this seems to make PBL unhappy when it does its scan through flash; it'll stop and just sit there, but pbltool still works fine. * A start at LCD support. I know Mark is working on this, but LCD stuff touches latch2 which is also used by the NAND, so I started on this. I'm not getting anything though; possibly the clock rates are the problem?
I'd like to see the LCD stuff finished; Mark, any input you have or work you've done would be good to see.
J.
-
Jonathan McDowell -
Matt Callow