- main - earth.li

Dozens (Hundreds?) of entries in my logs
by bsamuels＠beenthere-donethat.org.uk 19 Jan '02

19 Jan '02

Jan 18 22:02:00 XXXXXXXX kernel: Packet log: input DENY ppp0 PROTO=17 213.122.164.171:1038 255.255.255.255:2710 L=51 S=0x00 I=9892 F=0x0000 T=64 (#33) Can anyone tell me what these are? I'm suddenly (last few days) getting an awful lot of these firewall messages. They are emanating from my ISP (BtInternet). Barry Samuels

3 2

Announce digest, Vol 1 #8 - 1 msg
by announce-request＠lists.alug.org.uk 18 Jan '02

18 Jan '02

Send Announce mailing list submissions to announce(a)lists.alug.org.uk To subscribe or unsubscribe via the World Wide Web, visit http://lists.alug.org.uk/mailman/listinfo/announce or, via email, send a message with subject or body 'help' to announce-request(a)lists.alug.org.uk You can reach the person managing the list at announce-admin(a)lists.alug.org.uk When replying, please edit your Subject line so it is more specific than "Re: Contents of Announce digest..." *** Please send replies to main(a)lists.alug.org.uk, not announce... *** oMMMoMo Mo MMMMMMMoMo " "o"o"o"o oMMMoMoM oMMMMMM"MMM" " " " " " "o"o "oMMMoMMM " oMo"M"oo MM" " MoMoMMMMMMM oM " " "oMMM " " MoMMMMMoMoMoooo Mo MMM MoMoMMMMMoMMMMM o" MoM " MoMM "MMo"oMoMMMoM"" MM " MMMMo MMMMMoMMMMMM" oM " MoMMM MMMoMMMo"MM Mo" "MMoMo ooMMMMMMMoMo" oMo oMoMMM " "oMoMMMoMoMo MoM oMoMMM MMMMMMMMMoMMM "oM oMoMMM "M"M"MMoMMMo" " o "oo " MMMM" MMMMMoMoM o" " "oM " " " "o MMMoMMMo"o M " oM " " MMMMMMMoMo o" "oMoMoooMo" " o " " MMoMMMoMoMo " "o"o MM"""""""oM oM " "MMo oMMMMMoMMMoMo " """ """ " o"MMMMoMMMoMMMo"MMo"o" o o o oo MMMMMMoMMMoMMMoMoMo MMMMM MMMo oMMM MMMo MMoMMM oMoMMMoMMMoMMMoMMMo"o oMMMMM MMMo oMMM "MMo MMM "MM MMMMMMMoMMMMMMMoMMMM" " " MMo"MMo MMMo oMM" MMMo oMM" """ " MoMMMoMMMoMMMo" " " MMMoMMMo MMMo oMM" MMMo oMM"oMoMo " "MMoMMMoMMM " " MMMMMMMo MMMo oMM" MMMo oMM" "MM oMMMoMoMoMMMoMMMoMo" " oMM" "oMM" "MMMMM" "MMMMM" MMMoMM" ooMMMMMMMoMMMMMMMoMMMoMo "M" " " " " " """ """ "oM """oMM" " " "MMoMMMoMMMoMM" " " " " " " " alug-announce : The Newsletter of the Anglian Linux User Group Today's Topics: 1. Fw: CRAFT project (Martyn Drake) --__--__-- Message: 1 Date: Thu, 17 Jan 2002 13:53:21 +0000 From: Martyn Drake <martyn(a)alug.org.uk> To: announce(a)lists.alug.org.uk Subject: [Alug Announce] Fw: CRAFT project Begin forwarded message: Date: Thu, 17 Jan 2002 13:43:15 -0000 From: e.noble(a)coventry.ac.uk To: <martyn(a)drake.org.uk> Subject: CRAFT project The EPI Centre at Coventry University is participating in a project to help match European companies bidding for funds under the EC's Research and Development budget for SMEs known as CRAFT. CRAFT helps SMEs with limited research capability to develop new products or processes by paying the costs of a research organisation for them. I have recently been sent a profile for a project which has been proposed by an Italian company. They are looking for SME partners in the UK to join the Consortium. As it involves Linux, I wondered whether the following may be of interest to any of the companies in your association? (I can contact companies directly if this is easier). If any company is interested in participating or finding out more about the project, please either let me know or contact the details below as soon as possible. I look forward to hearing from you. With best regards Emma Emma Noble Project Assistant EPI Centre Coventry University TechnoCentre Puma Way Coventry CV1 2TT Tel: 02476 236593 GENERAL An Italian university spin off is looking for companies interested in developing a new system - VAS, a fully open source application to manage maintenance of legacy Microsoft Windows applications on a geographically distributed network. Catalogues are centralised on a Linux server, by means of Wine, and provided to client workstations using VNC. Companies interested in developing the VAS system itself, end users, interested in centralising Windows applications on a single server are being sought. DESCRIPTION The proposed solution is to centralise Windows applications and to distribute them through the Internet, using VNC and WINE. More in detail, the applications will be installed on a Linux server using WINE. Then, access to the applications will be provided using VNC, directly from the workstation of the users. In case of a new release of an application, it will be necessary only to update the installation on the server; on the client workstation the access will be performed again by the same VNC client. The innovation is to use two existing open source packages (WINE and VNC) to run Windows applications on a Linux server, and distribute them to users through the Internet. The Italian Company is looking for: -companies interested in marketing the server for specific Windows applications; -R&D partners interested in improving the existing WINE code, so to incraese the number of working Windows calls; - end users, interested in centralizing one of their Windows applications on a single server. Target Countries: Great Britain and Germany APPLICATION DOMAINS Industry - Transport Information Technology - Information processing, Information Systems CONTACT: Name: Paolo Bizzarri Phone: +39 050 970 207 Fax: +39 050 3136 588 Email address: p.bizzarri(a)icube.it www.icube,it Project Assistant EPI Centre Coventry University TechnoCentre Puma Way Coventry CV1 2TT Tel: 02476 236593 --__--__-- _______________________________________________ Announce mailing list Announce(a)lists.alug.org.uk http://lists.alug.org.uk/mailman/listinfo/announce End of Announce Digest

1 0

Help please.....
by Simon 18 Jan '02

18 Jan '02

Hi people..... I need some help if possible, I need a script of some flavour, bash,perl don't mind... I need to create 3500 .forward files in users home directories!!! the mail will be forwarded to the same user but at a different domain... Can anyone please help me with this quite urgently please please please... Simon P.S. I promise to learn scripting in the near future...

1 1

My new machine (If anyone's interested)
by bsamuels＠beenthere-donethat.org.uk 17 Jan '02

17 Jan '02

I remember a while ago that people were posting details of their current computers. I didn't do so because I knew that I would be updating my machine in the near future. So here are the details: =================================================================== Antec SX1240 full tower case. Good quality case with some nifty features such as being able to open the side of the case using a handle. One disadvantage is that there are so many cooling holes and slots the new machine is now more noisy than the old one. Hard drive noise mostly. Tyan Thunder K7 mainboard. 2 x 1.3 GHz athlon processors, 2 x LAN sockets, 512 MB ram, Winbond hardware monitoring, ATI Rage graphics chip. ===================================================================== Into this go my Adaptec 2940AU SCSI adapter, 3 x IBM SCSI hard drives together with the SCSI Tape Streamer, SCSI CD Writer, SoundBlaster and Matrox graphics card all from my old machine (not using the onboard graphics chip - only 4MB memory). Unfortunately I could not include my trusty old ISA 56k modem because the new board is PCI only and I don't like external modems - too untidy. So what does clever clogs do? He buys a PCMCIA to PCI adapter that will take an existing PCMCIA modem after researching that such a combination will work only to find that, although it does work, the maximum data transfer rate is 1.6k!!! The manufacturers of the adapter, Elan Digital Systems in Britain, tell that it won't work properly on my board without a BIOS or kernel modification because the bridge chip on the card is not being assigned a PCI interrupt. I'm just repeating what I've been told as it's way over my head anyway. I have emailed Tyan to ask if such modifications are likely to be made in the near future and am waiting for an answer. Does anyone know of a PCI modem that will be guaranteed to work with Debian Potato? As they are cheap it might do as a short term solution. I also replaced my dead UPS with a new Belkin UPS and Belkin provide Linux monitoring software. Good for them! The new setup has been running only a few days but during installation and testing I've had to reboot several times and occasionally after KDE(1) has started I've noticed that whatever was displayed when it was last closed down is opened twice. So I have two of everything. It does not happen every time and it didn't happen on the old machine. Still using the same hard drives and operating system! Oh! One minor problem. I cannot get any sound from the speaker when dialling. 'cardctl config' tells me that the speaker is enabled and the volume in kppp is set to medium. Any ideas on that? Maybe it's this lack of a PCI interrupt that's causing this. So there it is. A fast machine with what is effectively a 16k modem. Bah Humbug! Barry Samuels

1 0

Re: [Alug] Help please.....
by MJ Ray 17 Jan '02

17 Jan '02

> I need to create 3500 .forward files in users home directories!!! the mail > will be forwarded to the same user but at a different domain... Can anyone > please help me with this quite urgently please please please... If that is for all users at that domain, you should do it at the MTA level to avoid eating inodes on the disks. If it's only for some, you could try as script containing: cat fileofusernames | ( \ while read user do echo "$user@otherdomain" > ~$user/.forward done ) but I'd check and test that first ;-) -- MJR

1 0

PROBLEMS... with meet this weekend...
by Simon Parkes 17 Jan '02

17 Jan '02

Everyone... really really sorry about this, but due to health problems, I'm going to have to cencel this weekend at Cheveley... Once again, really sorry... This should be able to go ahead the week after all being well, but this weekeend is definately cancelled for Cheveley.. Simon

3 2

PROBLEMS... with meet this weekend...
by Simon Parkes 15 Jan '02

15 Jan '02

Everyone... really really sorry about this, but due to health problems, I'm going to have to cencel this weekend at Cheveley... Once again, really sorry... This should be able to go ahead the week after all being well, but this weekeend is definately cancelled for Cheveley.. Simon

1 0

Re: [Alug] dpgk nightmares
by Jenny_Hopkins＠toby-churchill.com 15 Jan '02

15 Jan '02

MJRay wrote: >Hopefully not, as testing is fairly good right now, as it's preparing for >release. Try to RTFM next time ;-) Where are my glasses...... >I have unixodbc for stable with Postgres 6 somewhere around, I think, or I >can try to build one for PG7.1, or maybe even iodbc, if it helps. How that >fits in which PHP is probably best dealt with by someone who knows more PHP >sysadmin things. If any of them are use, just let me know. php has built-in support for postgres already, so needs nothing else doing - that bit is working ok. It's a driver for php to talk to "other" databases I need. The rate I am going it would be far more efficient to move all my databases to postgres and get them working that way :-) Thankyou for the offer, though. >You could either go the whole hog and just flip "stable" to "testing" >in there, or you could add a deb-src line for "stable", do "apt-get -b >source packagename" and see if it builds for you. I think I might make things even worse. I'll give up on it for now,sadly. At least till I remember where I left my brain. Thanks, Jen.

1 0

Re: [Alug] dpgk nightmares
by Jenny_Hopkins＠toby-churchill.com 15 Jan '02

15 Jan '02

MJRay wrote: >Jenny: >> I can only find a deb version of the later rpm in testing so download the >> deb package >If it's in testing, a few of us can probably make you a copy for stable if >you tell us what it is. Installing "the odd package" from testing without >doing a dist-upgrade is probably not a good idea. Oh dear. Too late. I hope I haven't screwed masses of stuff up now. What i'm after is an odbc driver, I found http://rpmfind.net/linux/RPM/conectiva/7.0/cd2/conectiva/RPMS/php4-odbc-4.0… I thought it would be quite simple to install alien so I can use the rpm. Ha! I installed alien and eagerly went to install the rpm-packaged driver from the link above, but alien told me it couldn't deal with rpm using major number less than 3 (or something like that). What I then was trying to install was rpm 4.0.2-18 from the testing; this is what was requiring the unmet dependencies. Would a working copy not requiring bunches of weird stuff be a possibility? Chris Glover wrote: >How about downloading the source for alien and building it yourself??? I tried this just in case, but it still requires you to install rpm - so same problem. Richard K wrote: >Update libdb2 as well; libdb3 only conflicts with earlier versions of >it. Under "testing": .....I tried this too, but libdb3 still wouldn't install. and of course, Ricardo wrote: >"fsck this" well, quite! Many thanks to all. Worst linux day I've had for a long time. :-( Jen

3 2

dpgk nightmares
by Jenny_Hopkins＠toby-churchill.com 15 Jan '02

15 Jan '02

Hi list This is what i hate most. I want to install a driver that i can only find in rpm (I'm using debian) I installed alien I can't install the driver as it requires a later version of rpm I can only find a deb version of the later rpm in testing so download the deb package I need about a billion dependent packages, so download I try to dpkg -i them all I get stuck on installing libdb3 as it conflicts with libdb2 I can't remove libdb2 because loads of stuff depends on it. grrrrrrr, Perhaps there is a one-line two-word command someone can help me with that will cure my woes? I'm sure i'm doing this the hard way. Thanks, Jenny.

4 3