main

main@lists.alug.org.uk

3 participants
10374 discussions

RE: [ALUG] cups server problem
by Jenny Hopkins 03 Dec '03

03 Dec '03

Wayne Stallwood wrote: > > Not a CUPS expert by any means, but this sounds like a > flaky/incorrect printer > driver to me. > > What printer and CUPS driver are you using ? > Hi, The posts on this arrived after I left work yesterday, but I had another go last night and got it working. I think what *may* have happened is that because I'd been initially faffing about with various drivers/ports/settings the parallel port had got into an unhappy state. So when I then thought it should work as I'd got the settings correct (Epson Stylus C70, driver something like cups-2.4-gimp-something, /dev/lp0) it still kept spitting out nonsense. In the end a reboot cured it and it printed me a glorious test page. I then spent a while trying to print to it from a second linux box; I could see the request was getting through to the server by watching the output to the logfiles, but it seemed unhappy with "get_printer_attr" - "no good!" type errors. It'll be something silly somewhere. Thanks, Jenny

4 3

Advice required on CD burning software
by Nick Heppleston 02 Dec '03

02 Dec '03

Morning all, Starting to get into the world of creating my own CD's and as my new laptop doesn't have a floppy drive, I need to start writing data CD's. Can anybody recommend CD-writing software (and CD-RW software if there is a difference) for Linux? I run Gentoo over a blistering 56k dial-up modem so am looking for a few recommendations before I unleash the power of the modem ;-) Cheers, Nick -- Nick Heppleston 07989 581766 | nickheppleston(a)gmx.co.uk The Funky PC - http://www.thefunkypc.biz

6 5

Re: Playing DVDs with Linux using Ogle
by Richard Lewis 02 Dec '03

02 Dec '03

> I thought I would have a go at trying to get my PC to play DVDs this weekend > so I done an apt-get install ogle-mmx ogle-gui then ran install-css.sh and > linked /dev/dvd to /dev/hdc. > Why not just link to someting more obvious? # ln -s /dev/cdrom /dev/dvd > If I type "ogle" I get the ogle gui appear When I first started using Ogle I used to use it on the cmd line: $ ogle -u cli I remeber I often had to issue this command about 3 or 4 times and eventually it just worked. > However if I then click on FILE and OPEN DSC the following appears: > > libdvdcss error: failed opening device > libdvdread: Can't open /dev/dvd for reading. Do you know what version of libdvdcss, libdvdread and libdvdplay you have installed? Get the latest versions and make sure they're installed properly and with --prefix=/usr. They has quite a few dependencies so make sure they're all installed as well. http://developers.videolan.org/ (You may have to compile you're own versions of these; I don't know whether they're [libdvdcss] in Debian or not and I can't check because packages.debian.org is still down!) Cheers, Richard

2 1

Re: xwWindows
by Richard Lewis 02 Dec '03

02 Dec '03

>> Do anyone use wxWidows ? > > Many people use wxWindows. I think the site http://www.wxwindows.org/ > keeps lists of examples. > >> I juts thinking to base my staff on it or to use the standard way - >> GTKor >> KDE ? >> Some suggestion ? > > It depends how portable you wish your program to be. wxWindows can run > in lots of places and make a reasonable attempt at *looking* correct, > although it can't integrate as well with GNOME or KDE. > > I like to see people develop GNUstep, but that's another story. I would choose wxWindows over GNUstep; wxWindows runs on Unix variants, MacOS (inc. < 10) and Windows; whereas GNUstep only really runs on Unix variants. wxWindows is written in C++ against GNUstep in Objective C. (Though I suppose whether this is an advantage or disadvantage is enturely a matter of opinion ;) ) wxWindows is at a further stage of development. (2.4.2 against 1.9 & 0.9.1) Cheers, Richard

1 0

Reminder: Norwich thursday meet next week
by Syd Hancock 02 Dec '03

02 Dec '03

Don't forget: Norwich monthly evening meeting next week, thursday 11th December, from 8pm at the Forum bar. Syd

1 0

Video cards (or Names and topics)
by Edenyard 01 Dec '03

01 Dec '03

Thanks to Adam, Anthony and MJR for the thoughts on video cards. Adam wrote: > > to make your own VGA to Scart/RGB cable and use custom refresh rates to drive > the TV, you could possibly kill your tv doing this :) As far as I know there > are no consumer gfx cards that do RGB out (they either do composite or > s-video) > if anyone can prove me wrong then that would be fantastic. > RGB out was only a preference - I'd happily accept composite PAL or even YUV. But I suppose YUV is even more unlikely than RGB? Anthony Anson wrote: > > Did you say why you wanted a different card and what constitutes 'good'? > Yes, I did. I want something that plays DVDs well and something that gives composite, RGB or YUV video signals (in addition to the standard VGA socket). What constitutes 'good' is being well supported by Linux, i.e., having stable drivers that make all of the card's functions work. MJR wrote: > > Most likely, your question wasn't precise enough > Well - fair enough, if it wasn't. However (and with all due respect), I'd have thought that "I want well-supported video card for Linux that plays DVDs with video out" might have been specific enough to get something going? > > (seen ESR's paper about "smart questions"?) > No! What's that all about, then? Thanks for the input! Gerald.

3 2

wxWindows
by Vasko Tomanov 01 Dec '03

01 Dec '03

Do anyone use wxWidows ? I juts thinking to base my staff on it or to use the standard way - GTKor KDE ? Some suggestion ? Cheers Vasko

2 1

cups server problem
by Jenny Hopkins 01 Dec '03

01 Dec '03

Hi List, Are there any CUPS experts out there? I tried to set up cups printing system last night, but when I try and print a test page from the webadmin page on the localhost it prints the first top half-inch of "This is a test page" in inch-high letters then grinds to a halt and just sits there. Thanks, jenny

3 2

Playing DVDs with Linux using Ogle
by Ian Douglas 01 Dec '03

01 Dec '03

Hi folks, I thought I would have a go at trying to get my PC to play DVDs this weekend so I done an apt-get install ogle-mmx ogle-gui then ran install-css.sh and linked /dev/dvd to /dev/hdc. If I type "ogle" I get the ogle gui appear and I get the following console errors: Note[ogle_ctrl]: ogle 0.8.2 Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_gui with pid 4483 warning: failed to load external entity "/home/ian/.oglerc" WARNING[ogle_gui]: Couldn't load config file WARNING[ogle_gui]: interpret_config(): Couldn't read '/home/ian/.oglerc' Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_nav with pid 4484 warning: failed to load external entity "/home/ian/.oglerc" WARNING[ogle_nav]: Couldn't load config file WARNING[ogle_nav]: interpret_config(): Couldn't read '/home/ian/.oglerc' Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_mpeg_ps with pid 4485 Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_vout with pid 4486 However if I then click on FILE and OPEN DSC the following appears: libdvdcss error: failed opening device libdvdread: Can't open /dev/dvd for reading. vm: faild to open/read the DVD Debug[ogle_ctrl]: child: 4484 exited with 1 Debug[ogle_ctrl]: pid: 4484 exited with status: 1 Debug[ogle_ctrl]: child: 4486 killed Debug[ogle_ctrl]: pid: 4486 terminated on signal: 2 Debug[ogle_ctrl]: child: 4485 killed Debug[ogle_ctrl]: pid: 4485 terminated on signal: 2 Debug[ogle_ctrl]: child: 4483 killed Debug[ogle_ctrl]: pid: 4483 terminated on signal: 2 Debug[ogle_ctrl]: removing shmid: 10616832 Note[ogle_ctrl]: exiting ian@rhino:~$ I am confused.... why is ogle unable to open /dev/dvd? Ian.

3 5

Weekly IRC reminder
by Neill Newman 01 Dec '03

01 Dec '03

This is the automated ALUG IRC meeting reminder sent to remind you that there is an IRC meeting tonight (Monday) at 8.00pm. The meeting takes place on the irc server irc.alug.org.uk in the #alug channel. Most IRC clients should allow you to get there with the commands "/server irc.alug.org.uk" and "/join #alug". Popular IRC clients include tkirc, bitchx, xchat and EPIC on Unix, and Mirc under windows. Here are some links to help you get started with irc. Unix http://www.xchat.org/ http://freshmeat.net/ http://www.epicsol.org/ Windows http://www.mirc.com (loads of help with irc for newbies!)

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main