- main - earth.li

Re: RE: [ALUG] Anyone want Mandrake 10 ISOs?
by syd＠toufol.com 08 Mar '04

08 Mar '04

Richard Lewis <richard.lewis(a)uea.ac.uk> wrote on 08.03.2004, 10:17:50: > >I downloaded the Mandrake 10 community edition ISOs today, so if anyone's in > >Norwich and would like a copy let me know and I'll burn some CDs for you. > > Um, I think only Mandrake club members can donwload the ISOs at the moment. If > you are and have respectively then you probably shouldn't give them away to > non-club members. Community edition will be available for general d'load > soon. I'm not sure this is correct. AFAIK although the d/l *facility* is reserved for club members only at present, I don't believe that there are any restrictions on sharing the first four CDs once we have them. (CD5 is commercial s/w AFAIR and is more restricted). But, it does need clarification. When I can get on the mandrakeclub forums I'll ask about this. Syd

1 0

RE: [ALUG] Anyone want Mandrake 10 ISOs?
by Richard Lewis 08 Mar '04

08 Mar '04

>I downloaded the Mandrake 10 community edition ISOs today, so if anyone's in >Norwich and would like a copy let me know and I'll burn some CDs for you. Um, I think only Mandrake club members can donwload the ISOs at the moment. If you are and have respectively then you probably shouldn't give them away to non-club members. Community edition will be available for general d'load soon. Cheers, Richard

1 0

Weekly IRC reminder
by Neill Newman 08 Mar '04

08 Mar '04

This is the automated ALUG IRC meeting reminder sent to remind you that there is an IRC meeting tonight (Monday) at 8.00pm. The meeting takes place on the irc server irc.alug.org.uk in the #alug channel. Most IRC clients should allow you to get there with the commands "/server irc.alug.org.uk" and "/join #alug". Popular IRC clients include tkirc, bitchx, xchat and EPIC on Unix, and Mirc under windows. Here are some links to help you get started with irc. Unix http://www.xchat.org/ http://freshmeat.net/ http://www.epicsol.org/ Windows http://www.mirc.com (loads of help with irc for newbies!)

1 0

Re: [ALUG] Suse 8.2 - Internet Connection Sharing
by Bruce Clark 07 Mar '04

07 Mar '04

Hi Wayne Stallwood and Peter Onion gave me some advice, but it dosen't seem to have worked. Wayne - Here is the info you asked for: Some lines from /var/log/messages Mar 7 21:30:08 linux pppd[13840]: remote IP address 135.196.22.152 Mar 7 21:30:08 linux pppd[13840]: primary DNS address 194.168.4.100 Mar 7 21:30:08 linux pppd[13840]: secondary DNS address 194.168.8.100 Mar 7 21:30:08 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file Mar 7 21:30:09 linux kernel: SuSE-FW-ILLEGAL-ROUTING IN=eth0 OUT=ppp0 SRC=192.168.0.2 DST=205.188.250.25 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=111 DF PROTO=TCP SPT=1036 DPT=80 WINDOW=64240 RES=0x00 SYN URGP=12288 OPT (020405B401010402) Mar 7 21:30:10 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2 Mar 7 21:30:10 linux pppd[13840]: Script /etc/ppp/ip-up finished (pid 13879), status = 0x0 Mar 7 21:30:15 linux kernel: SuSE-FW-DROP-ANTI-SPOOFING IN=eth0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=240 TOS=0x00 PREC=0x00 TTL=64 ID=28407 DF PROTO=UDP SPT=138 DPT=138 LEN=220 Mar 7 21:30:15 linux kernel: SuSE-FW-DROP-ANTI-SPOOFING IN=eth0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=234 TOS=0x00 PREC=0x00 TTL=64 ID=28408 DF PROTO=UDP SPT=138 DPT=138 LEN=214 Mar 7 21:30:34 linux pppd[13840]: CCP: timeout sending Config-Requests The contents of /etc/sysconfig/susefirewall2 # Copyright (c) 2000-2002 SuSE GmbH Nuernberg, Germany. All rights reserved. # # Author: Marc Heuse <marc(a)suse.de>, 2002 # Please contact me directly if you find bugs. # # If you have problems getting this tool configures, please read this file # carefuly and take also a look into # -> /usr/share/doc/packages/SuSEfirewall2/EXAMPLES ! # -> /usr/share/doc/packages/SuSEfirewall2/FAQ ! # -> /usr/share/doc/packages/SuSEfirewall2/SuSEfirewall2.conf.EXAMPLE ! # # /etc/sysconfig/SuSEfirewall2 # # for use with /sbin/SuSEfirewall2 version 3.1 which is for 2.4 kernels! # # ------------------------------------------------------------------------ # # PLEASE NOTE THE FOLLOWING: # # Just by configuring these settings and using the SuSEfirewall2 you are # not secure per se! There is *not* such a thing you install and hence you # are safed from all (security) hazards. # # To ensure your security, you need also: # # * Secure all services you are offering to untrusted networks (internet) # You can do this by using software which has been designed with # security in mind (like postfix, apop3d, ssh), setting these up without # misconfiguration and praying, that they have got really no holes. # SuSEcompartment can help in most circumstances to reduce the risk. # * Do not run untrusted software. (philosophical question, can you trust # SuSE or any other software distributor?) # * Harden your server(s) with the harden_suse package/script # * Recompile your kernel with the openwall-linux kernel patch # (former secure-linux patch, from Solar Designer) www.openwall.com # * Check the security of your server(s) regulary # * If you are using this server as a firewall/bastion host to the internet # for an internal network, try to run proxy services for everything and # disable routing on this machine. # * If you run DNS on the firewall: disable untrusted zone transfers and # either don't allow access to it from the internet or run it split-brained. # # Good luck! # # Yours, # SuSE Security Team # # ------------------------------------------------------------------------ # # Configuration HELP: # # If you have got any problems configuring this file, take a look at # /usr/share/doc/packages/SuSEfirewall2/EXAMPLES for an example. # # # All types have to set enable SuSEfirewall2 in the runlevel editor # # If you are a end-user who is NOT connected to two networks (read: you have # got a single user system and are using a dialup to the internet) you just # have to configure (all other settings are OK): 2) and maybe 9). # # If this server is a firewall, which should act like a proxy (no direct # routing between both networks), or you are an end-user connected to the # internet and to an internal network, you have to setup your proxys and # reconfigure (all other settings are OK): 2), 3), 9) and maybe 7), 11), 14) # # If this server is a firewall, and should do routing/masquerading between # the untrusted and the trusted network, you have to reconfigure (all other # settings are OK): 2), 3), 5), 6), 9), and maybe 7), 10), 11), 12), 13), # 14), 20) # # If you want to run a DMZ in either of the above three standard setups, you # just have to configure *additionally* 4), 9), 12), 13), 17), 19). # # If you know what you are doing, you may also change 8), 11), 15), 16) # and the expert options 19), 20), 21), 22) and 23) at the far end, but you # should NOT. # # If you use diald or ISDN autodialing, you might want to set 17). # # To get programs like traceroutes to your firewall to work is a bit tricky, # you have to set the following options to "yes" : 11 (UDP only), 18 and 19. # # Please note that if you use service names, that they exist in /etc/services. # There is no service "dns", it's called "domain"; email is called "smtp" etc. # # *Any* routing between interfaces except masquerading requires to set FW_ROUTE # to "yes" and use FW_FORWARD or FW_ALLOW_CLASS_ROUTING ! # # If you just want to do masquerading without filtering, ignore this script # and run this line (exchange "ippp0" "ppp0" if you use a modem, not isdn): # iptables -A POSTROUTING -t nat -j MASQUERADE -o ippp0 # echo 1 > /proc/sys/net/ipv4/ip_forward # and additionally the following lines to get at least a minimum of security: # iptables -A INPUT -j DROP -m state --state NEW,INVALID -i ippp0 # iptables -A FORWARD -j DROP -m state --state NEW,INVALID -i ippp0 # ------------------------------------------------------------------------ ## Path: Network/Firewall/SuSEfirewall2 ## Description: SuSEfirewall2 configuration ## Type: yesno ## Default: no # # 1.) # Should the Firewall run in quickmode? # # "Quickmode" means that only the interfaces pointing to external networks # are secured, and no other. all interfaces not in the list of FW_DEV_EXT # are allowed full network access! Additionally, masquerading is # automatically activated for FW_MASQ_DEV devices. and last but not least: # all incoming connection via external interfaces are REJECTED. # You will only need to configure 2.) and FW_MASQ_DEV in 6.) # Optionally, you may add entries to section 9a.) # # Choice: "yes" or "no", if not set defaults to "no" # FW_QUICKMODE="no" ## Type: string # 2.) # Which is the interface that points to the internet/untrusted networks? # # Enter all the network devices here which are untrusted. # # Choice: any number of devices, seperated by a space # e.g. "eth0", "ippp0 ippp1 eth0:1" # FW_DEV_EXT="ppp0" ## Type: string # # 3.) # Which is the interface that points to the internal network? # # Enter all the network devices here which are trusted. # If you are not connected to a trusted network (e.g. you have just a # dialup) leave this empty. # # Choice: leave empty or any number of devices, seperated by a space # e.g. "tr0", "eth0 eth1 eth1:1" or "" # FW_DEV_INT="eth0" ## Type: string # # 4.) # Which is the interface that points to the dmz or dialup network? # # Enter all the network devices here which point to the dmz/dialups. # A "dmz" is a special, seperated network, which is only connected to the # firewall, and should be reachable from the internet to provide services, # e.g. WWW, Mail, etc. and hence are at risk from attacks. # See /usr/share/doc/packages/SuSEfirewall2/EXAMPLES for an example. # # Special note: You have to configure FW_FORWARD to define the services # which should be available to the internet and set FW_ROUTE to yes. # # Choice: leave empty or any number of devices, seperated by a space # e.g. "tr0", "eth0 eth1 eth1:1" or "" # FW_DEV_DMZ="" ## Type: yesno ## Default: no # # 5.) # Should routing between the internet, dmz and internal network be activated? # REQUIRES: FW_DEV_INT or FW_DEV_DMZ # # You need only set this to yes, if you either want to masquerade internal # machines or allow access to the dmz (or internal machines, but this is not # a good idea). This option supersedes IP_FORWARD from # /etc/sysconfig/network/options # # Setting this option one alone doesn't do anything. Either activate # massquerading with FW_MASQUERADE below if you want to masquerade your # internal network to the internet, or configure FW_FORWARD to define # what is allowed to be forwarded! # # Choice: "yes" or "no", if not set defaults to "no" # FW_ROUTE="yes" ## Type: yesno ## Default: no # # 6.) # Do you want to masquerade internal networks to the outside? # REQUIRES: FW_DEV_INT or FW_DEV_DMZ, FW_ROUTE # # "Masquerading" means that all your internal machines which use services on # the internet seem to come from your firewall. # Please note that it is more secure to communicate via proxies to the # internet than masquerading. This option is required for FW_MASQ_NETS and # FW_FORWARD_MASQ. # # Choice: "yes" or "no", if not set defaults to "no" # FW_MASQUERADE="yes" ## Type: string # # You must also define on which interface(s) to masquerade on. This is # normally your external device(s) to the internet. # Most users can leave the default below. # # e.g. "ippp0" or "$FW_DEV_EXT" FW_MASQ_DEV="$FW_DEV_EXT" ## Type: string # # Which internal computers/networks are allowed to access the internet # directly (not via proxys on the firewall)? # Only these networks will be allowed access and will be masqueraded! # # Choice: leave empty or any number of hosts/networks seperated by a space. # Every host/network may get a list of allowed services, otherwise everything # is allowed. A target network, protocol and service is appended by a comma to # the host/network. e.g. "10.0.0.0/8" allows the whole 10.0.0.0 network with # unrestricted access. "10.0.1.0/24,0/0,tcp,80 10.0.1.0/24,0/0tcp,21" allows # the 10.0.1.0 network to use www/ftp to the internet. # "10.0.1.0/24,tcp,1024:65535 10.0.2.0/24" is OK too. # Set this variable to "0/0" to allow unrestricted access to the internet. # FW_MASQ_NETS="0/0" ## Type: yesno ## Default: yes # # 7.) # Do you want to protect the firewall from the internal network? # REQUIRES: FW_DEV_INT # # If you set this to "yes", internal machines may only access services on # the machine you explicitly allow. They will be also affected from the # FW_AUTOPROTECT_SERVICES option. # If you set this to "no", any user can connect (and attack) any service on # the firewall. # # Choice: "yes" or "no", if not set defaults to "yes" # # "yes" is a good choice FW_PROTECT_FROM_INTERNAL="no" ## Type: yesno ## Default: yes # # 8.) # Do you want to autoprotect all running network services on the firewall? # # If set to "yes", all network access to services TCP and UDP on this machine # will be prevented (except to those which you explicitly allow, see below: # FW_SERVICES_{EXT,DMZ,INT}_{TCP,UDP}) # # Choice: "yes" or "no", if not set defaults to "yes" # FW_AUTOPROTECT_SERVICES="yes" ## Type: string # # 9.) # Which services ON THE FIREWALL should be accessible from either the internet # (or other untrusted networks), the dmz or internal (trusted networks)? # (see no.13 & 14 if you want to route traffic through the firewall) XXX # # Enter all ports or known portnames below, seperated by a space. # TCP services (e.g. SMTP, WWW) must be set in FW_SERVICES_*_TCP, and # UDP services (e.g. syslog) must be set in FW_SERVICES_*_UDP. # e.g. if a webserver on the firewall should be accessible from the internet: # FW_SERVICES_EXT_TCP="www" # e.g. if the firewall should receive syslog messages from the dmz: # FW_SERVICES_DMZ_UDP="syslog" # For IP protocols (like GRE for PPTP, or OSPF for routing) you need to set # FW_SERVICES_*_IP with the protocol name or number (see /etc/protocols) # # Choice: leave empty or any number of ports, known portnames (from # /etc/services) and port ranges seperated by a space. Port ranges are # written like this: allow port 1 to 10 -> "1:10" # e.g. "", "smtp", "123 514", "3200:3299", "ftp 22 telnet 512:514" # For FW_SERVICES_*_IP enter the protocol name (like "igmp") or number ("2") # # Common: smtp domain FW_SERVICES_EXT_TCP="http https imap imaps pop3 pop3s rsync smtp ssh telnet" ## Type: string # Common: domain FW_SERVICES_EXT_UDP="" # Common: domain ## Type: string # For VPN/Routing which END at the firewall!! FW_SERVICES_EXT_IP="" ## Type: string # # Common: smtp domain FW_SERVICES_DMZ_TCP="" ## Type: string # Common: domain FW_SERVICES_DMZ_UDP="" ## Type: string # For VPN/Routing which END at the firewall!! FW_SERVICES_DMZ_IP="" ## Type: string # # Common: ssh smtp domain FW_SERVICES_INT_TCP="" ## Type: string # Common: domain syslog FW_SERVICES_INT_UDP="" # For VPN/Routing which END at the firewall!! FW_SERVICES_INT_IP="" ## Type: string # 9a.) # External services in QUICKMODE. # This is only used for QUICKMODE (see 1.)! # (The settings here are similar to section 9.) # Which services ON THE FIREWALL should be accessible from either the # internet (or other untrusted networks), i.e. the external interface(s) # $FW_DEV_EXT # # Enter all ports or known portnames below, seperated by a space. # TCP services (e.g. SMTP, WWW) must be set in FW_SERVICES_QUICK_TCP, and # UDP services (e.g. syslog) must be set in FW_SERVICES_QUICK_UDP. # e.g. if a secure shell daemon on the firewall should be accessible from # the internet: # FW_SERVICES_QUICK_TCP="ssh" # e.g. if the firewall should receive isakmp (IPsec) internet: # FW_SERVICES_QUICK_UDP="isakmp" # For IP protocols (like IPsec) you need to set # FW_SERVICES_QUICK_IP="50" # # Choice: leave empty or any number of ports, known portnames (from # /etc/services) and port ranges seperated by a space. Port ranges are # written like this: allow port 1 to 10 -> "1:10" # e.g. "", "smtp", "123 514", "3200:3299", "ftp 22 telnet 512:514" # For FW_SERVICES_*_IP enter the protocol name (like "igmp") or number ("2") # # QUICKMODE: TCP services open to external networks (InterNet) # (Common: ssh smtp) FW_SERVICES_QUICK_TCP="" ## Type: string # QUICKMODE: UDP services open to external networks (InterNet) # (Common: isakmp) FW_SERVICES_QUICK_UDP="" ## Type: string # QUICKMODE: IP protocols unconditionally open to external networks (InterNet) # (For VPN firewall that is VPN gateway: 50) FW_SERVICES_QUICK_IP="" ## Type: string # # 10.) # Which services should be accessible from trusted hosts/nets? # # Define trusted hosts/networks (doesnt matter if they are internal or # external) and the TCP and/or UDP services they are allowed to use. # Please note that a trusted host/net is *not* allowed to ping the firewall # until you set it to allow also icmp! # # Choice: leave FW_TRUSTED_NETS empty or any number of computers and/or # networks, seperated by a space. e.g. "172.20.1.1 172.20.0.0/16" # Optional, enter a protocol after a comma, e.g. "1.1.1.1,icmp" # Optional, enter a port after a protocol, e.g. "2.2.2.2,tcp,22" # FW_TRUSTED_NETS="" ## Type: string # # 11.) # How is access allowed to high (unpriviliged [above 1023]) ports? # # You may either allow everyone from anyport access to your highports ("yes"), # disallow anyone ("no"), anyone who comes from a defined port (portnumber or # known portname) [note that this is easy to circumvent!], or just your # defined nameservers ("DNS"). # Note that you can't use rpc requests (e.g. rpcinfo, showmount) as root # from a firewall using this script (well, you can if you include range # 600:1023 in FW_SERVICES_EXT_UDP ...). # Please note that with v2.1 "yes" is not mandatory for active FTP from # the firewall anymore. # # Choice: "yes", "no", "DNS", portnumber or known portname, # if not set defaults to "no" # # Common: "ftp-data", better is "yes" to be sure that everything else works :-( FW_ALLOW_INCOMING_HIGHPORTS_TCP="no" ## Type: string # Common: "DNS" or "domain ntp", better is "yes" to be sure ... FW_ALLOW_INCOMING_HIGHPORTS_UDP="DNS" ## Type: yesno ## Default: yes # # 12.) # Are you running some of the services below? # They need special attention - otherwise they won´t work! # # Set services you are running to "yes", all others to "no", # if not set defaults to "no" # If you want to offer the below services to your DMZ as well, # (and not just internally), set the switches below to "dmz", # if you even want to offer to the world as well, set to "ext" # instead of "yes" (NOT RECOMMENDED FOR SECURITY REASONS!) # FW_SERVICE_AUTODETECT="yes" # Autodetect the services below when starting ## Type: yesno ## Default: no # If you are running bind/named set to yes. Remember that you have to open # port 53 (or "domain") as udp/tcp to allow incoming queries. # Also FW_ALLOW_INCOMING_HIGHPORTS_UDP needs to be "yes" FW_SERVICE_DNS="no" ## Type: yesno ## Default: no # if you use dhclient to get an ip address you have to set this to "yes" ! FW_SERVICE_DHCLIENT="no" ## Type: yesno ## Default: no # set to "yes" if this server is a DHCP server FW_SERVICE_DHCPD="no" ## Type: yesno ## Default: no # set to "yes" if this server is running squid. You still have to open the # tcp port 3128 to allow remote access to the squid proxy service. FW_SERVICE_SQUID="no" ## Type: yesno ## Default: no # set to "yes" if this server is running a samba server. You still have to # open the tcp port 139 to allow remote access to SAMBA. FW_SERVICE_SAMBA="no" ## Type: string # # 13.) # Which services accessed from the internet should be allowed to the # dmz (or internal network - if it is not masqueraded)? # REQUIRES: FW_ROUTE # # With this option you may allow access to e.g. your mailserver. The # machines must have valid, non-private, IP addresses which were assigned to # you by your ISP. This opens a direct link to your network, so only use # this option for access to your dmz!!!! # # Choice: leave empty (good choice!) or use the following explained syntax # of forwarding rules, seperated each by a space. # A forwarding rule consists of 1) source IP/net and 2) destination IP # seperated by a comma. e.g. "1.1.1.1,2.2.2.2 3.3.3.3/16,4.4.4.4/24" # Optional is a protocol, seperated by a comma, e.g. "5.5.5.5,6.6.6.6,igmp" # Optional is a port after the protocol with a comma, e.g. "0/0,0/0,udp,514" # FW_FORWARD="" # Beware to use this! ## Type: string # # 14.) # Which services accessed from the internet should be allowed to masqueraded # servers (on the internal network or dmz)? # REQUIRES: FW_ROUTE # # With this option you may allow access to e.g. your mailserver. The # machines must be in a masqueraded segment and may not have public IP addesses! # Hint: if FW_DEV_MASQ is set to the external interface you have to set # FW_FORWARD from internal to DMZ for the service as well to allow access # from internal! # # Please note that this should *not* be used for security reasons! You are # opening a hole to your precious internal network. If e.g. the webserver there # is compromised - your full internal network is compromised!! # # Choice: leave empty (good choice!) or use the following explained syntax # of forward masquerade rules, seperated each by a space. # A forward masquerade rule consists of 1) source IP/net, 2) the IP to which # the requests will be forwarded to (in the dmz/intern net), 3) a protocol # (tcp/udp only!) and 4) destination port, seperated by a comma (","), e.g. # "4.0.0.0/8,1.1.1.1,tcp,80" # # Optional is a port after the destination port, to redirect the request to # a different destination port on the destination IP, e.g. # "4.0.0.0/8,1.1.1.1,tcp,80,81" # # Optional is an target IP address on which should the masquerading be decided. # You have to set the optional port option to use this. # # Example: # 200.200.200.0/24,10.0.0.10,tcp,80,81,202.202.202.202 # The class C network 200.200.200.0/24 trying to access 202.202.202.202 port # 80 will be forwarded to the internal server 10.0.0.10 on port 81. # Example: # 200.200.200.0/24,10.0.0.10,tcp,80 # The class C network 200.200.200.0/24 trying to access anything which goes # through this firewall ill be forwarded to the internal server 10.0.0.10 on # port 80 # FW_FORWARD_MASQ="" # Beware to use this! ## Type: string # # 15.) # Which accesses to services should be redirected to a localport on the # firewall machine? # # This can be used to force all internal users to surf via your squid proxy, # or transparently redirect incoming webtraffic to a secure webserver. # # Choice: leave empty or use the following explained syntax of redirecting # rules, seperated by a space. # A redirecting rule consists of 1) source IP/net, 2) destination IP/net, # 3) protocol (tcp or udp) 3) original destination port and 4) local port to # redirect the traffic to, seperated by a colon. e.g.: # "10.0.0.0/8,0/0,tcp,80,3128 0/0,172.20.1.1,tcp,80,8080" # Please note that as 2) destination, you may add '!' in front of the IP/net # to specify everything EXCEPT this IP/net. # FW_REDIRECT="" ## Type: yesno ## Default: yes # # 16.) # Which logging level should be enforced? # You can define to log packets which were accepted or denied. # You can also the set log level, the critical stuff or everything. # Note that logging *_ALL is only for debugging purpose ... # # Choice: "yes" or "no", if not set FW_LOG_*_CRIT defaults to "yes", and # FW_LOG_*_ALL defaults to "no" # FW_LOG_DROP_CRIT="yes" ## Type: yesno ## Default: no # FW_LOG_DROP_ALL="no" ## Type: yesno ## Default: yes # FW_LOG_ACCEPT_CRIT="yes" ## Type: yesno ## Default: no # FW_LOG_ACCEPT_ALL="no" ## Type: string # # only change/activate this if you know what you are doing! FW_LOG="--log-level warning --log-tcp-options --log-ip-option --log-prefix SuSE-FW" ## Type: yesno ## Default: yes # # 17.) # Do you want to enable additional kernel TCP/IP security features? # If set to yes, some obscure kernel options are set. # (icmp_ignore_bogus_error_responses, icmp_echoreply_rate, # icmp_destunreach_rate, icmp_paramprob_rate, icmp_timeexeed_rate, # ip_local_port_range, log_martians, mc_forwarding, mc_forwarding, # rp_filter, routing flush) # Tip: Set this to "no" until you have verified that you have got a # configuration which works for you. Then set this to "yes" and keep it # if everything still works. (It should!) ;-) # # Choice: "yes" or "no", if not set defaults to "yes" # FW_KERNEL_SECURITY="yes" ## Type: yesno ## Default: no # # 18.) # Keep the routing set on, if the firewall rules are unloaded? # REQUIRES: FW_ROUTE # # If you are using diald, or automatic dialing via ISDN, if packets need # to be sent to the internet, you need to turn this on. The script will then # not turn off routing and masquerading when stopped. # You *might* also need this if you have got a DMZ. # Please note that this is *insecure*! If you unload the rules, but are still # connected, you might your internal network open to attacks! # The better solution is to remove "/sbin/SuSEfirewall2 stop" or # "/sbin/init.d/firewall stop" from the ip-down script! # # # Choices "yes" or "no", if not set defaults to "no" # FW_STOP_KEEP_ROUTING_STATE="no" ## Type: yesno ## Default: yes # # 19.) # Allow (or don't) ICMP echo pings on either the firewall or the dmz from # the internet? The internet option is for allowing the DMZ and the internal # network to ping the internet. # REQUIRES: FW_ROUTE for FW_ALLOW_PING_DMZ and FW_ALLOW_PING_EXT # # Choice: "yes" or "no", defaults to "no" if not set # FW_ALLOW_PING_FW="yes" ## Type: yesno ## Default: no # FW_ALLOW_PING_DMZ="no" ## Type: yesno ## Default: no # FW_ALLOW_PING_EXT="no" ## # END of /etc/sysconfig/SuSEfirewall2 ## # # #-------------------------------------------------------------------------# # # # EXPERT OPTIONS - all others please don't change these! # # # #-------------------------------------------------------------------------# # # ## Type: yesno ## Default: yes # # 20.) # Allow (or don't) ICMP time-to-live-exceeded to be send from your firewall. # This is used for traceroutes to your firewall (or traceroute like tools). # # Please note that the unix traceroute only works if you say "yes" to # FW_ALLOW_INCOMING_HIGHPORTS_UDP, and windows traceroutes only if you say # additionally "yes" to FW_ALLOW_PING_FW # # Choice: "yes" or "no", if not set defaults to "no" # FW_ALLOW_FW_TRACEROUTE="yes" ## Type: yesno ## Default: yes # # 21.) # Allow ICMP sourcequench from your ISP? # # If set to yes, the firewall will notice when connection is choking, however # this opens yourself to a denial of service attack. Choose your poison. # # Choice: "yes" or "no", if not set defaults to "yes" # FW_ALLOW_FW_SOURCEQUENCH="yes" ## Type: yesno ## Default: no # # 22.) # Allow/Ignore IP Broadcasts? # # If set to yes, the firewall will not filter broadcasts by default. # This is needed e.g. for Netbios/Samba, RIP, OSPF where the broadcast # option is used. # If you do not want to allow them however ignore the annoying log entries, # set FW_IGNORE_FW_BROADCAST to yes. # # Choice: "yes" or "no", if not set defaults to "no" # FW_ALLOW_FW_BROADCAST="no" ## Type: yesno ## Default: yes # FW_IGNORE_FW_BROADCAST="yes" ## Type: yesno ## Default: no # # 23.) # Allow same class routing per default? # REQUIRES: FW_ROUTE # # Do you want to allow routing between interfaces of the same class # (e.g. between all internet interfaces, or all internal network interfaces) # be default (so without the need setting up FW_FORWARD definitions)? # # Choice: "yes" or "no", if not set defaults to "no" # FW_ALLOW_CLASS_ROUTING="no" ## Type: string # # 25.) # Do you want to load customary rules from a file? # # This is really an expert option. NO HELP WILL BE GIVEN FOR THIS! # READ THE EXAMPLE CUSTOMARY FILE AT /etc/sysconfig/scripts/SuSEfirewall2-custom # #FW_CUSTOMRULES="/etc/sysconfig/scripts/SuSEfirewall2-custom" FW_CUSTOMRULES="" ## Type: yesno ## Default: no # # 26.) # Do you want to REJECT packets instead of DROPing? # # DROPing (which is the default) will make portscans and attacks much # slower, as no replies to the packets will be sent. REJECTing means, that # for every illegal packet, a connection reject packet is sent to the # sender. # # Choice: "yes" or "no", if not set defaults to "no" # FW_REJECT="no" ## Type: string # # 27.) # Tuning your upstream a little bit via HTB (Hierarchical Token Bucket) # for more information about HTB see http://www.lartc.org # # If your download collapses while you have a parallel upload, # this parameter might be an option for you. It manages your # upload stream and reserves bandwidth for special packets like # TCP ACK packets or interactive SSH. # It's a list of devices and maximum bandwidth in kbit. # For example, the german TDSL account, provides 128kbit/s upstream # and 768kbit/s downstream. We can only tune the upstream. # # Example: # If you want to tune a 128kbit/s upstream DSL device like german TDSL set # the following values: # FW_HTB_TUNE_DEV="ppp0,125" # where ppp0 is your pppoe device and 125 stands for 125kbit/s upstream # # you might wonder why 125kbit/s and not 128kbit/s. Well practically you'll # get a better performance if you keep the value a few percent under your # real maximum upload bandwidth, to prevent the DSL modem from queuing traffic in # it's own buffers because queing is done by us now. # So for a 256kbit upstream # FW_HTB_TUNE_DEV="ppp0,250" # might be a better value than "ppp0,256". There is no perfect value for a # special kind of modem. The perfect value depends on what kind of traffic you # have on your line but 5% under your maximum upstream might be a good start. # Everthing else is special fine tuning. # If you want to know more about the technical background, # http://tldp.org/HOWTO/ADSL-Bandwidth-Management-HOWTO/ # is a good start # FW_HTB_TUNE_DEV="" The results of tracert 66.102.11.99 Completed in 14 hops. Hop 2 timed out. IPConfig: DHCP Enabled - no IP Address - 192.168.0.2 Subnet - 255.255.255.0 Default Gateway - 192.168.0.1 Sorry for the long message -- Bruce Clark http://www.social-informatics.net

1 0

Suse 8.2 - Internet Connection Sharing
by Bruce Clark 07 Mar '04

07 Mar '04

Hi, This is my first post to the group. I hope the question isn't one that is asked all the time. I run a Suse 8.2 on a laptop that is also my only internet connection. I am trying to get my Windows PC to connect to the internet through my Laptop. My IP settings are as follows: Laptop - 192.168.0.1 - 255.255.255.0 Windows - 192.168.0.2 - 255.255.255.0 I have tried using the Suse firewall to enable masquerading, but nothing seems to be working. The two machines can see each other. Many thanks in advance. -- Bruce Clark http://www.social-informatics.net

3 2

Feroda
by Peter Onion 06 Mar '04

06 Mar '04

Are there any Fedora Core 1 or core 2 users here ? I've put Core 1 on my little black box, and I'm downloading core 2 iso's at the moment (for a few hours more as well). Peter

2 1

there's no place 127.0.0.1!
by Richard Bensley 06 Mar '04

06 Mar '04

Hey all, I would just like to say thanks for all the great support and responses I got a while back when I first joined you guys. Thanks especially to Wayne Stallwood for sending me a copy of Gentoo, which indcued much stress, but I kept going. I ahve finally found a place to truly call 127.0.0.1, in the form of "No S**t Knoppix". Thanks again, and I hope to meet some of you at the next Norwich meeting. Richard.

1 0

Announce digest, Vol 3 #5 - 1 msg
by announce-request＠lists.alug.org.uk 06 Mar '04

06 Mar '04

Send Announce mailing list submissions to announce(a)lists.alug.org.uk To subscribe or unsubscribe via the World Wide Web, visit http://lists.alug.org.uk/mailman/listinfo/announce or, via email, send a message with subject or body 'help' to announce-request(a)lists.alug.org.uk You can reach the person managing the list at announce-admin(a)lists.alug.org.uk When replying, please edit your Subject line so it is more specific than "Re: Contents of Announce digest..." --------------.--------------------------------------------.------------ alug-announce | Newsletter of the Anglian Linux User Group | Weekly(ish) --------------'--------------------------------------------'------------ ** Please send articles for this letter to announce(a)lists.alug.org.uk ** *** Please send replies to main(a)lists.alug.org.uk, not announce... *** ------------------------------------------------------------------------ Today's Topics: 1. Norwich evening meeting: 11th March 2004 (Syd Hancock) --__--__-- Message: 1 From: Syd Hancock <syd(a)toufol.com> To: alug <main(a)lists.alug.org.uk> Date: Wed, 3 Mar 2004 19:30:34 +0000 Cc: announce <announce(a)lists.alug.org.uk> Subject: [Alug Announce]Norwich evening meeting: 11th March 2004 The monthly Norwich 'second thursday' evening social meet will take=20 place next week, 11th March from 8 pm in the 'City Gate' pub,=20 Dereham Road.=20 =46ull address, photo, link to map etc here: http://www.norwichpubs.info/norwichpubs/pubpages/citygate.htm If you have not attended one of these meets before, they are=20 informal and unstructured and general chat covers many topics as=20 well as the obvious linux-related stuff. There may or may not be a=20 penguin on the table :-) =3D=3D=3D directions etc =3D=3D=3D The City Gate pub is just off the inner ring road at the junction of=20 Grapes Hill and Barn Road. Dereham Road is the A1074 - take the Costessey junction on the A47=20 if coming from west of Norwich. Otherwise, when going clockwise around the inner ring road, Dereham=20 road is the left turn at the traffic lights at the bottom of Grapes=20 Hill (but see parking info below). There is a very large Cane Furniture shop on the corner and this is=20 probably the best landmark from either direction. The pub, which=20 has a large glass frontage (see link to picture above), is next to=20 the cane furniture shop. There is ample parking nearby, including possible free parking on=20 the forecourt of a wine warehouse next to the pub or on side roads=20 off Dereham Road.=20 There is also Pay-and-Display parking ( =A31.40 for the evening) on=20 the other side of the ring road off St Swithin's road. Coming down=20 Grapes Hill turn right at the lights (St Benedict's Street) and=20 then left into the entrance to the car park which is behind=20 Toys-R-Us. Syd --__--__-- _______________________________________________ Announce mailing list Announce(a)lists.alug.org.uk http://lists.alug.org.uk/mailman/listinfo/announce End of Announce Digest

1 0

usb flash drive
by Jenny Hopkins 05 Mar '04

05 Mar '04

Hi, has anyone had any luck with the little flash usb drives and linux? I'm thinking of getting one to make carrying work from here to home and back easier. Thanks, Jen ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________

6 7

kernel 2.6
by bjsamuels＠beenthere-donethat.org.uk 05 Mar '04

05 Mar '04

I normally compile my own kernels but I've not had so much trouble as I'm having with 2.6.2 and 2.6.0 before it. I'm running Debian Sarge (Testing). When starting to boot I see 'bios data check successful' then there is a pause of two minutes before the boot continues. In the log I see 'No module symbols loaded - kernel modules not enabled'. In my config I have: # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y Anyone else experiencing problems with this kernel? Barry Samuels http://www.beenthere-donethat.org.uk The Unofficial Guide to Great Britain

6 12