- main - earth.li

NTP between local PCs
by Edenyard 04 Apr '04

04 Apr '04

I'm trying to get two networked Linux boxes to show the same time in X by using ntp. I'm running ntpd on the main one and I've added the IP address of the secondary one to /etc/ntp.conf. However, using ntpdate doesn't set the secondary PC's clock to agree with the main PC, because ntpdate complains that the main PC is too high a stratum. Does anyone know how to get over this. I suspect that the main problem is to do with the main PC not being connected to a kosher ntp server at the time (since there's no internet connection) but it seems that it ought to be possible to sync the two machines' clocks nonetheless. When there IS an internet connection, the main PC uses ntp quite happily to adjust its clock to whatever external server I select, but, even then, the secondary box won't sync to the main one. I've read through all the HTML documentation that comes with ntp in the Slackware 9.1 distribution, but no joy. Any clues, please, anyone? Gerald.

2 1

DVD-R questions
by Wayne Stallwood 03 Apr '04

03 Apr '04

I was kindly given a Pioneer DVD A-04 today. Getting a bit old now, but it does (or should do) the job. I have two slight problems though. The drive is up and burning, but k3b on SuSE 9.0 moans that if I want to use Disk at Once mode I need to either find a copy of cdrdao that supports ATAPI writers or start using ide-scsi. I have never had to use ide-scsi before as I have always had SCSI writers, I tried the obvious adding hdc=ide-scsi bit to Lilo (as a guess) but it just resulted in the kernel complaining that it couldn't enable DMA for HDC. After a boot cdrecord --scanbus couldn't see it so I guess that didn't work out so well. How do I enable ide-scsi for this drive. Also, This drive has had a firmware update to enable it to write at 2x to the new style media , but k3b (or whatever tools it uses under the GUI) has firmly decided that this drive is a 1x drive. Any ideas how I change this or force the issue. Funilly enough it also missreports the maximum speed of my Yamaha SCSI drive as 6x when cdrecord is quite happy running it at it's full speed of 8x Side note, Anybody can make me a silly offer for my ageing (but still pretty good) external SCSI writer (complete with Ultra2 lead) even if the drive is a bit slow, the external case may be handy for a faster drive.

4 12

Re: [alug social] Discrimination in action?
by Craig 03 Apr '04

03 Apr '04

On 2 Apr 2004, at 22:19, adam(a)thebowery.co.uk wrote: > Just to follow this up, I guess that most of you know but I am sure > there are a > few stragglers and people we have forgotten (sorry!) but Kirsty and I > are > expecting our first baby in November of this year :) Congratulations! Just done name it Joe V2.0 or something like someone in the US did..... C

1 0

Freeserve Problems
by johnseago 03 Apr '04

03 Apr '04

Has anyone else had problems using freeserve as an ISP but using their own email address/domain name/ I ask because I have had considerable problems over the past week. It also transpires, after a fight to get them to admit it, that they are blocking emails with the following subject lines in the headers: Test Hi Hello Mail Delivery System Mail Transaction Failed Server Report Status Error URGENT ASSISTANCE INHERITANCE CLAIM LETTER FROM DR CHRIS CAN I TRUST YOU -- John Seago

3 2

Linux Courses @ City College Norwich
by Craig 03 Apr '04

03 Apr '04

I finally got a reply through someone I know at college offering this course back then in January (Was it January?). The reply was this: "Sorry to take so long to reply, I have been off sick. I am afraid that we have had insufficient numbers to run the courses this summer term so the next start date is September." Hope that helps. C

3 8

Shared Hard Drives for windows and Linux
by Stuart Hammond 02 Apr '04

02 Apr '04

Dear All I have a dual Hard drive systme which i am planning on booting both Linux and Windows XP one of the hard drives is givin over exclusivly to media (music movies ETC.) what i would apprecated advice on is: 1) Whats the best Format for the shared Hard Drive 2) What is the best loss less compression for music which can be used both in linux and windows (i was thinking FLAC but i havnt had any experince of it) And a bit off topic: 3) Any Good Free (as in beer) CD rippers for windows which compress to FLAC or simmiler Yours S Hammond _________________________________________________________________ It's fast, it's easy and it's free. Get MSN Messenger today! http://www.msn.co.uk/messenger

6 6

Tax on open source software by UK?
by Nick Daniels 02 Apr '04

02 Apr '04

Hi I have just come across this on Slashdot It alleges, hidden in the budget , there is a proposal to Tax OSS http://www.lose-it.org.uk Regards Nick Daniels

2 1

MS preps new Shared Source challenge to OSS?
by Ben Francis 01 Apr '04

01 Apr '04

If you can't beat 'em, join 'em... http://www.theregister.co.uk/content/4/36691.html also here: http://www.cbronline.com/currentnews/7503585eb6e9543f80256e670038578b and here: http://www.theinquirer.net/?article=15060 P.S. Yes folks it *is* April 1st. -- Ben "tola" Francis

2 1

FW: FREE Back issues of Linux magazine (Just pay postage)
by Martyn Drake 31 Mar '04

31 Mar '04

For anybody interested - just get in touch with this guy! :) Regards, Martyn chris bose wrote: > Hello, > > I got your email address from the user group pages of the January > 2002 issue. I am sorry to bother you if you are no longer the group > organizer. > > I have the following back issues to give away to anyone interested, > if they just pay the postage. They are all in excellent condition and > have the cover CD's intact: > > Available issues: Nov and Dec 2000, Jan to Dec 2001, Jan to Nov > 2002. > All with cover cd's, in excellent condition. > > Please get in touch if you would like them. I would prefer someone to > take the whole batch if possible. > > Thanks very much, > > Chris Bose PhD > In Press PR Ltd > t: +44 1488 73737 > www.increase-website-traffic.org.uk

1 1

PLC programming in Linux
by Edenyard 31 Mar '04

31 Mar '04

Has anyone here ever had any experience with using Linux to program a Programmable Logic Controller or similar device? If so, what software did you use and for which make of PLC? I've just spent a very unfruitful afternoon Googling for some clues: so far, nothing! Thanks for any hints, Gerald.

2 1