- main - earth.li

pcmcia question
by Jenny_Hopkins＠toby-churchill.com 04 Jan '01

04 Jan '01

Greetings, all. Can anyone give me a pointer here? I have spent weeks trying to work out how to get my laptop connected to a home network. I have RH6.2 running on a Toshiba satellite, and have bought a buffalo 10/100 pcmcia, which uses pcnet_cs driver. What I have done so far: Edited the /etc/pcmcia/config file to include the card type, as per instructions that came with card. Edited /etc/conf.modules to include alias eth0 pcnet_cs options pcnet_cs io=0x300, irq=5 I then changed the io=0x300 to io=0x254 after looking up pcmcia entry in /proc/devices. /etc/pcmcia/config.opts shows to exclude 4,7 and 12, and to include port 0x100-0x4ff, port0x1000-0x17ff When I boot up the card gives a high beep and a low beep. I get the message that it can't find the net address. If i do an ifconfig eth0 i get an error fetching information message. I can ping using loopback but any other address on my local network gives network unobtainable. Networking is turned on, can't bring eth0 up, i think addresses are in ok. I'm booting with the card inserted. Can anyone see anything i have done that is glaringly obviously wrong? Cheers, Jenny.

1 0

Singapore Linux Conference 2001 (fwd)
by MJ Ray 01 Jan '01

01 Jan '01

Anyone wanting to travel? ;-) Eeek re paper date, though. ---------- Forwarded message ---------- Date: Fri, 22 Dec 2000 03:57:09 -0600 From: Sanjeev Gupta <ghane(a)dotxtra.com> Subject: Singapore Linux Conference 2001 Dear Sir, I would appreciate your circulating the message below on your mailing list. The SLC, first held in 1999, is organised by the Linux Users' Group (Singapore), in collaboration with IDG, which runs LinuxWorld Expo. Last year, some of our speakers included Mr Robert Young, Red Hat; Mr Robert Chassell, Free Software Foundation; Mr Theodore T'so, IETF; Chip Salzenberg, OSI; as well as senior staff from IBM, SGI, and Intel. We also conducted Tutorials on Samba and Perl Extensions, among others. We typically aim for two tracks, Business and Technical, with some Speakers having slots that cut accross both. This year, I also hope to organise a Debian BoF meet. FIRST CALL FOR PAPERS Singapore Linux Conference / LinuxWorld 2001 March 21-24 2001, Singapore This annual conference and expo, started in 1999, aims to draw world-renowned experts in the exciting field of Linux and showcase the state-of-the-art in Linux and Computing in the IT hub of South-East Asia, Singapore. In this third edition, we plan a conference which will focus on the growth of Linux as a broadly available and used platform. CONFERENCE Papers are invited for presentation during the Conference, which will be held on Thursday, 22nd, and Friday, 23rd March. Following last year's success, there will be two tracks, "Business" and "Technical". The topics below are meant to indicate the possible variety of areas, they should not be regarded as exhaustive. * Productivity Tools and Suites * Multimedia enhancements * Internationalization and Localization * Beowulf / High Performance Computing * Distributed Computing * Life Sciences * Embedded Linux * Linux PDAs * IPv6, and "personal" IP addresses * B2B Ecommerce * Security: DoS attacks using innocent third parties * Security in General * Network Trust * Open Standards: What value to the user? * Wireless Technology * Mobile Computing * IP telephony (Truly everyone at everywhere!) * Linux in Education * The Linux Community * Diversity in the Linux Demography * LUGs' Experiences * Software Licencing * The Open Source Movement Prospective authors are requested to submit full papers for review. Electronic submissions are strongly encouraged through email. Hard-copy submissions are also permitted, and three copies of the manuscript should be sent to the address below. You may like to take a note of the following dates - Submission of full paper - 5th January, 2001 Papers will be rigorously reviewed by the Technical Program Committee, and reviewers' comments will be relayed to the authors on request in the interest of transparency. TUTORIALS Tutorial Sessions will be held on Wednesday, 21st March. Tutorials have a strong technical bias, and are intended for a more mature audience, in terms of Computing and Programming exposure. Prospective tutorial speakers are invited to submit proposals to the Conference Secretariat. Each proposal should include: * a summary * a course outline and * a brief biography of the speaker. Proposals complete with the required documents should be sent to the address below. CORRESPONDENCE ADDRESS Sanjeev Gupta 40 Kaki Bukit Place Singapore 416218 email: ghane(a)dotxtra.com Tel: +65 9855 1208 Fax: +65 7494434 All correspondence will be acknowledged. -- MJR

1 0

Re: [Alug] Introduction
by MJ Ray 01 Jan '01

01 Jan '01

"Tony Cook" <idiamin(a)idiamin.plus.com> writes: [...] > should be very greatful as I believe I could then overlay the 2.2.16 modules > with the 2.2.14 set and thus get Win4Lin running correctly and > interconnecting with my system components, noteably my printer and > soundcard. This may well work for *some* modules. Another answer has already pointed you to the SuSE downloads... -- MJR

1 0

Introduction
by Tony Cook 27 Dec '00

27 Dec '00

I apologies for flooding your e-mail but I would like to introduce myself as a new member. My real name is Tony Cook, I adopted the internet handle of idiamin because the late entirely unlamented gentleman was the only person I ever heard of who was without doubt more self centered, egotistical and a bigger idiot to boot, than I. My computer set up is a Gigabyte AT board carrying an AMD K6/2 500 CPU with a SoundBlaster 128 and a Voodoo 3 graphics card and I have 128M/B of ram plugged in at the moment while my H/D is a 20GB unit which seemed enormous when I bought it but which is now beginning to be a little confining. I currently dual boot Win98 and Linux. Win98, with which I am reasonably familiar because it gives me access to a cheap parallel port scanner, if anyone knows or hears of a scsi emulation which will allow Sane to co-exist with it please let me know together with games, mostly old, which are either not available or comparatively cost a lotty under Linux. For the future however I plan to migrate my more serious interests, D.T.P. and graphics manipulation to Linux with the impact of adapting to new software being lessened by loading Win4Lin from Trelos. As far as Linux is concerned I am a complete newbie and to be frank I find getting used to it to be a bit challenging. My home computing background originated with CPM and the Spectrum, progressed to the Amiga and dos in emulation and then to Win95 native on a PC. At the moment I am still fumbling my way around the Linux CLI structure and trying to forget I ever knew dos. I have tried several Linux distro`s, Mandrake 7.1, Red Hat 7.0 and Suse 7.0 before finally determining on Suse 7 Pro as my system of choice largely due to the excellent documentation available and the, (Comparatively easy and reliable installation). I nearly threw a rock through my monitor when grappling with Red Hat, and Mandrake though initially very good revealed bugs in operation with which at my current level of experience I could not resolve. The only specific problem I currently have centres around Win4Lin for which there is currently no specific Kernal is yet available for Suse 7.0 although 6.4 is supported. I gather from Trelos that support for 7.0 is in the pipeline however. Incidentally support is currently available for both the other distro`s I have. According to the manual, which I have read, there is very little change between 6.4 and 7.0 apart that is from the compiled modules which are of course not interchangeable. If anyone were in a position to supply me with an evaluation copy of the basic Suse 6.4 system I should be very greatful as I believe I could then overlay the 2.2.16 modules with the 2.2.14 set and thus get Win4Lin running correctly and interconnecting with my system components, noteably my printer and soundcard. Best regards, compliments of the season and apologies for rattling on,

2 1

Re: [Alug] Another New Member
by MJ Ray 18 Dec '00

18 Dec '00

kerin <kerin.westgate(a)virgin.net> writes: > ManDrake 7.1 but for the life of me, I can not get my dam printer to > print anything, the printer is a Epson 480, I don't get any error > messages, and if I do lpc, status, I get, queuing is enabled, printing > is enabled, no entries, no daemon present, and that's after sending a > test page, It's as though there is a code missing to switch the > printer on, as it's a auto on/off. It seems that the 480 is a bit of a swine and isn't that similar to most of the other Epson printers, which combined with Epson's refusal to provide good docs means it isn't supported just now. To quote: Unfortunately, this printer has some odd quirks that make it more difficult to support than other Epson Stylus printers. Epson also has not been willing to release the command needed to allow changing the printer cartridge; therefore we had to drop support for this printer in the stp driver. on http://www.linuxprinting.org/pipermail/epson-list/2000q4/000045.html Might be worth reading around that list a little. > If any one could help it would show the spirit of the Linux world Hrm, you been bitterness and cynicism about certain manufacturers who will release neither drivers nor the details we need to create our own? ;-) > Kerin. > > Paul Shorter wrote: > > Hi Everyone, Please don't include other unrelated messages. If you're replying, please trim the included message and write replies beneath the quoted parts. That's fairly quick to do and makes it a lot nicer for all. Thanks :-) -- MJR

1 0

New Member
by Kerin 18 Dec '00

18 Dec '00

Hi I just received a e-mail from yourself, I like Linux very much and would like to get involved a lot more, it's a lot more fun than Windows As a newbie I don't really know what i'm doing, maybe you could help though, I've sent up ppp, networking, between my Advent 450 Piii pc and an old Tiny 386 sx all works fine its been good fun, I'm running ManDrake 7.1 but for the life of me, I can not get my dam printer to print anything, the printer is a Epson 480, I don't get any error messages, and if I do lpc, status, I get, queuing is enabled, printing is enabled, no entries, no daemon present, and that's after sending a test page, It's as though there is a code missing to switch the printer on, as it's a auto on/off. If any one could help it would show the spirit of the Linux world Cheers Kerin.

1 0

Another New Member
by Paul Shorter 18 Dec '00

18 Dec '00

Hi Everyone, My name's Paul and I'm a Linux fan. Well, that's the confession out of the way. I work for an engineering firm and I look after several Linux servers, including our email server which runs Sendmail. We use RH 6.2 here, along with Samba to support the Windoze clients. We used to use NetWare 4.11 but it crashed more times than a zx81 with a wobbly ram pack, so I ditched it. My main duty is email admin, so if anyone out there wants to swap horror stories, especially regarding Outlook as an email client, i'm game. Cheers, Paul.

2 1

Where are you Ipswich people??
by cepi x 16 Dec '00

16 Dec '00

Somehow, all Linux-Magazine and Linux-Formats get sold in Ipswich within days and here hasn't seen yet an Ipswich Linux user...where are u guys...wake up...stop me on the street :--)...just a tought CEPi UCS Ipswich Software Engineering __________________________________________________ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/

6 5

Re: Where are you Ipswich people??
by Deana 16 Dec '00

16 Dec '00

Hello Jenny. I'm quite new (well, six months or so) to Linux, and getting ready to evict Mr Gate$ machinations from my primary hd. You can get lots of help from the PCPlus forums (nntp.futurenet.com) in the linux.beginner newsgroup, and have a laugh on pcplus.test Good luck. -- Regards, Deana deana(a)linuxfan.com

1 0

Re: [Alug] Where are you Ipswich people??
by David Freeman 15 Dec '00

15 Dec '00

Bear in mind the large campus place on the east side of ipswich has a high consentration of techies. In my office alone about 8 people are hardened linux users. Extrapolate that over the 5000 people on the site it must be a few hundred people. Thats probably where there all going. D --- cepi x <cepi77(a)yahoo.com> wrote: > Somehow, all Linux-Magazine and Linux-Formats get sold > in Ipswich within days and here hasn't seen yet an > Ipswich Linux user...where are u guys...wake up...stop > me on the street :--)...just a tought > > CEPi > > UCS Ipswich > Software Engineering > > > > __________________________________________________ > Do You Yahoo!? > Yahoo! Shopping - Thousands of Stores. Millions of Products. > http://shopping.yahoo.com/ > > > _______________________________________________ > alug, the Anglian Linux User Group list > Email: alug(a)stu.uea.ac.uk > http://rabbit.stu.uea.ac.uk/cgi-bin/listinfo/alug > See the website for instructions on digest or unsub! __________________________________________________ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/

1 0