- main - earth.li

recovery from disaster/rebuilding kernel
by Ricardo Campos 14 Feb '02

14 Feb '02

I am going to attempt to rebuild my kernel (gulp). Now, if I TOTALLY screw it up (likely), I want to know if it is possible for me to preserve my /home partition, and my X configuration: 1. Will the new kernel build impact on my X configuration? I know that my kernel has the NVdriver module installed (the one that came with X 4.1.0), but I'm concerned as to whether if I rebuild the kernel from source, it will require a new installation of X? 2. I have a separate /home partition, on a separate drive (hdb) to where / resides (hda). I did this incase hda fails.However, as I understand it, even if I make a user with the same name and password and mount /home to the old /home partition, I will still not be able to access any of the files due to permissions- am I right? If so, would there be a way to save the user info on floppy/CD whatever so that if I did fsck it all up, I could just start an install from scratch and use those files to get access to the old /home? (an install from scratch being far quicker!) Could I possibly ask any more questions in one e-mail? ;) TIA Ricardo -- Get your free email from www.linuxmail.org Powered by Outblaze

3 2

Multiple NICs
by Ricardo Campos 14 Feb '02

14 Feb '02

OK, I'm wondering if this is possible in Linux: One server, thebeast.mydomain.com , has 2 NICS. 1 has an IP of 10.0.0.1, the other of 10.0.0.2 . It is connected to a switch (which has a few other servers attached), and the switch to the rest of the LAN. It's a pretty critical server, under quite heavy load. Is there any way that a client could connect to thebeast.mydomain.com and sometimes connect to one IP, sometimes to another? I'm looking for fault tolerance as well as load balancing between the network cards. I know that Intel Server adapters do this on NT and Novell. Anyone have any ideas? Would it involve DNS jiiggerypokery? i.e. DNS server sending requests to 1 IP then another. Or maybe a switch that could do it? Ricardo PS please don't say "buy another server and cluster it" or somesuch. an additional NIC is FAR cheaper than another high-end server. -- Get your free email from www.linuxmail.org Powered by Outblaze

2 1

RHN users-advice
by Ricardo Campos 12 Feb '02

12 Feb '02

Just a quick question for RedHatNetwork Users- anyone had any probs updating the kernel via rhnsd? I'm usiong the latest version of that... my only outdated packages are the kernel and XFree86.... (Yes, I'm scared it may fsck up, I only have a dial-up!) Ricardo _______________________________________________ "There are several codes, and I know several of them." -Mr. Precise. http://www.rscampos.net Check my online diary out: http://www.rscampos.net/blog.html -- Get your free email from www.linuxmail.org Powered by Outblaze

2 1

Re: [Alug] port forwarding
by Ricardo Campos 12 Feb '02

12 Feb '02

>If you firewall out SMTP into the network except for the > gateway then that should help you avoid doing a Demon and getting your > outgoing mail relay listed in an RBL even though it's actually a > customer's fault. What's an RBL? I use Demon as an ISP, and with a paid e-mail account I was only able to use demon's SMTP server, rather than the one I paid for... is this due to relaying? Would this also affect me if I had an MTA on my box at home? Ricardo -- Get your free email from www.linuxmail.org Powered by Outblaze

2 1

Re: [Alug] "Reverse" VNC
by Laurie Brown 12 Feb '02

12 Feb '02

Eric Sellin wrote: > Hi Laurie, > > If you want to gain control over a remote computer but you can't connect to > it (because of NAT, firewall or God knows what), you can start the VNC > viewer in Listen mode on your own computer. > > Then, on the remote computer, get your customer to:- > - start the VNC server > - right-click on the VNC icon in the icon tray > - choose the "Add New Client" option > - supply your own IP address > > Of course, there has to be somebody in front of the remote computer to > initiate the reverse connection, which I understand is not ideal. Thanks, Eric, that worked a treat. I'm a shade embarrassed I didn't spot that functionality myself! One thing I did have to do was to open port 550x (where x = display number) on my firewall to incoming traffic. Cheers, Laurie. -- --------------------------------------------------------------------- Laurie Brown laurie(a)brownowl.com PGP key at http://pgpkeys.mit.edu:11371 ---------------------------------------------------------------------

1 0

Re: [Alug] port forwarding
by MJ Ray 12 Feb '02

12 Feb '02

Jonathan McDowell wrote: > presumably redirecting to a machine that expects to relay for the > network anyway, so that bit isn't a problem either. It'll Just Work, Can you tell where they originally came from, or will the smtp server assume it's all from the machine doing the redirect? Relay Hell potential. -- MJR

2 1

Debain transition
by Mike Lincoln 12 Feb '02

12 Feb '02

Hi all, I've recently tried out Debian (woody) and was very impressed. I'm new to debian, but not Linux/GNU. I've lived with various distributions in the past, Slakware, Redhat, then SuSE. I found myself with a few problems under debian, for example getting my usb keyboard and mouse working. I know how to hack them into submission, but I'm sure it's not done it the "Debian way". I'm missing /dev entires for most usb devices, I get the impression there must be a .deb for this ? keybdev also needs to be modprobed (so I added it to /etc/modules). (I'm running kernel 2.4.x) I have many other little niggles, so I guess I should RTM. Anyway, my question is: Is there a good website/book that is aimed at experienced users who wish to migrate from other distributions to Debian? Thanks, Mike

3 2

Re: [Alug] Debain transition
by MJ Ray 12 Feb '02

12 Feb '02

Mike Lincoln wrote: > [...] I'm missing /dev entires for most usb devices, I get the impression > there must be a deb for this ? I have the fstab line none /proc/bus/usb usbdevfs defaults 0 0 Maybe that helps you? It's not devfs (yet), so the devices are in /proc/bus/usb I guess. > Is there a good website/book that is aimed at experienced users who wish > to migrate from other distributions to Debian? You've seen the produce of the "Debian Documentation Project"? Another handy site for keeping up to date is http://www.debianplanet.org/ Other than that and the usual mailing lists etc, I'm not sure what to suggest. -- MJR

1 0

VNC problems
by tom potts 12 Feb '02

12 Feb '02

I would imagine the problem here is due to the firewalls. Can you VNC on to machines outside your firewall? If so your firewall is configured to map the VNC connections correctly. If not you'll have to configure your firewall to do that before you arrange for the clients to be configured - if they'll allow it cos its a bit of a security hole apparently. It shouldnt be difficult - if you/they can browse then there will be mappings for port 80 so they just need to be copied for whatever vnc uses. If you're doing work fro them I would recommend at the very least that VNC is not run as an autostart service but when you need to connect they start the listening service and the service is terminated when you have done to prevent any unwarranted intrusion. Ideally you should get them to disable the VNC access through the firewall when its not required just in case someone 'clocks the wrong button' and leaves someone else in charge on a PDC! Tom __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

1 0

Weekly IRC reminder
by Neill Newman 12 Feb '02

12 Feb '02

This is the automated ALUG IRC meeting reminder sent to remind you that there is an IRC meeting tonight (Monday) at 8.00pm. The meeting takes place on the irc server irc.openprojects.net in the #alug channel, you can take a look at www.openprojects.net to get more info on the openprojects network. Most IRC clients should allow you to get there with the commands "/server uk.openprojects.net" or "/server eu.openprojects.net" and "/join #alug". Popular IRC clients include tkirc, bitchx, xchat and EPIC on Unix, and Mirc under windows. Here are some links to help you get started with irc. Unix http://www.xchat.org/ http://freshmeat.net/ http://www.epicsol.org/ Windows http://www.mirc.com (loads of help with irc for newbies!)

6 9