- main - earth.li

[ALUG Announce] 3rd Monday Monthly Ipswich Social Meeting : The Mulberry Tree
by samwise 18 Nov '13

18 Nov '13

ALUG Announce Please send announcements to Announce(a)lists.alug.org.uk Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce ----- The monthly "Third Monday" ALUG Ipswich Social Meeting is back today, 18th November, at 20:00: The Mulberry Tree 5 Woodbridge Road IPSWICH IP4 2EA Tel: 01473 225776 Map/Directions URI: http://maps.google.co.uk/?q=IP4+2EA WWW: https://www.facebook.com/MULBERRYHOSPITALITY The Mulberry Tree, previously known as The Milestone Beer House, is a grade 2 listed building in the centre of Ipswich. It is located at the intersection between Woodbridge Road and the A1156, across the road from the old Odeon cinema and not far from the Regent Theatre. It re-opened on Thursday March 29th 2012 after a major refurbishment, under its original name of The Mulberry House and has already begun to regain a good reputation for its selection of beers and ales. It has a sizeable car park to the rear of the building. All are welcome, novices and experienced users. Feel free to ask for further information on the Main ALUG mailing list. Note: I'm unable to attend this evening as I've got a prior committment - I strongly recommend emailing round / jumping on IRC / posting to the main ALUG mailing list, to check who else will be about. I'll endeavour to get over later in the evening, but not sure when I'll be free. Cheers, Peter. ----- Send discussion replies to main(a)lists.alug.org.uk (Reply-To set) Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce

1 0

[ALUG Announce] ALUG Norwich Pub Meet Thursday 14th November
by Viperfang 16 Nov '13

16 Nov '13

ALUG Announce Please send announcements to Announce(a)lists.alug.org.uk Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce ----- Hello Norwich Aluggers, Our monthly ALUG Norwich social meeting will be held this Thursday, 14th November at The Coach and Horses (82 Thorpe Road, Norwich, NR1 1BA). The meeting officially starts at 8pm, although some people may arrive earlier. More information on those people can be found on the list and the IRC channel. If you are unsure if you will recognise us then make yourself and your intent to attend known by either posting on list or visiting us on IRC so we can look out for you rather than hiding in the corner. Optionally you could ask at the bar if they know where the geeky computer weirdos are and they'll point you in the right direction (seriously!). Another possibility is look for heaps of electronics on a table that may possibly look like movie props that would used for detonating explosives. Feel free to bring electronics/laptops/gadgets to the meet, you will by no means be alone. Ben Bewick aka Viperfang NB: This mail is automated, please refer to the usual sources for more information. ALUG Contact Details: Website : http://www.alug.org.uk/ IRC : #alug on irc.alug.org.uk List : http://lists.alug.org.uk/mailman/listinfo Twitter : http://twitter.com/anglianlug Identica: TBA Facebook: http://www.facebook.com/group.php?gid=2381613902 ----- Send discussion replies to main(a)lists.alug.org.uk (Reply-To set) Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce

4 9

Simple SMTP server for authenticated mail relay
by Mark Rogers 15 Nov '13

15 Nov '13

I need to setup a server to allow authenticated SMTP from various devices. It won't be high volume, and it'll sit alongside other apps on an existing server. SSMTP is my default choice for a simple SMTP server but I don't think it'll do what I want here - any suggestions? I was hoping to avoid something as "big" as Postfix/etc -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) @ 13 Clarke Rd, Milton Keynes, MK1 1LG

4 6

Cross compilation
by Chris Walker 13 Nov '13

13 Nov '13

Apologies if this doesn't fit well here but I'm stuck and need some help. If I should enquire elsewhere, please feel free to point me in the right direction. I've been trying for some time to write an app. I tried first of all to do it for my phone but gave up with that and am now trying to modify it for a Blackberry Playbook. The problem I have is that when I upload the compiled app to the device, it complains and says 'libmeegoplugin.so' uses incompatible Qt library. Expected build key "arm qnx qcc no-pkg-config", got "Windows mingw release full-config" My problem is that I don't have a clue how I might generate another shared object but this time with the correct build key. Before you ask, I didn't generate that one, it came as part of a download which the author said worked for him. I can't see how but never mind. I built the Qt Creator install from source from instructions here - http://qt-project.org/wiki/Building-Qt4-for-Blackberry So did I miss a step there, or can I go back and redo some or all of those steps to recreate the file but this time in the correct format? I have also looked long and hard online for a version with the correct build key but without success so I'm having to ask here for help. For those with long memories, I have asked in the distant past about SQL tables and got help here. I'm guessing that was probably two or three years ago but that data was for this app. Yes, I have been at it for that long! I'm no programmer as is obvious ;-)

1 0

Alug 2nd Thursday Social Meeting Reminder
by Steve Engledow 11 Nov '13

11 Nov '13

Hello Norwich Aluggers, Our monthly ALUG Norwich social meeting will be held this Thursday, 14th November at The Coach and Horses (82 Thorpe Road, Norwich, NR1 1BA). The meeting officially starts at 8pm, although some people may arrive earlier. More information on those people can be found on the list and the IRC channel. If you are unsure if you will recognise us then make yourself and your intent to attend known by either posting on list or visiting us on IRC so we can look out for you rather than hiding in the corner. Optionally you could ask at the bar if they know where the geeky computer weirdos are and they'll point you in the right direction (seriously!). Another possibility is look for heaps of electronics on a table that may possibly look like movie props that would used for detonating explosives. Feel free to bring electronics/laptops/gadgets to the meet, you will by no means be alone. Steve Engledow aka Stilvoid

1 0

how to read outlook express files
by mick 09 Nov '13

09 Nov '13

Hi guys I have been given a large stash of (email I believe) files with the extension .eml. I think these were created with outlook or outlook express. I have no MS software. The files appear to be text/XML but reading them with a text editor is difficult in many cases. Does anyone know of a linux based application I can use to make this task any easier. Cheers Mick --------------------------------------------------------------------- Mick Morgan gpg fingerprint: FC23 3338 F664 5E66 876B 72C0 0A1F E60B 5BAD D312 http://baldric.net ---------------------------------------------------------------------

4 7

Fw: Make this your moment
by mick 07 Nov '13

07 Nov '13

All See below mail from ORG. Is anyone interested in the possibility of setting up a cryptoparty? Anyone from norwich2600 on the list with views? Is there likely to be a demand for such a party in Norfolk (or perhaps the wider Anglia region? Anyone with any similar experience (such as key signing parties)? Mick Begin forwarded message: Date: Wed, 6 Nov 2013 05:43:48 -0500 (EST) From: ORG- Ruth Coustick-Deal <ruth(a)openrightsgroup.org> To: mick(a)rlogin.net Subject: Make this your moment Dear Mick Morgan, How can we protect our email, IM chat and web browsing from the prying eyes of GCHQ and the NSA? Over the last few months we've learnt more and more from Edward Snowden and The Guardian about just how exposed our online communications are. To help protect our online privacy, we're looking to help you put on a Cryptoparty in your local area. Could you be a key organiser for one near you? Reply to this email to let us know. https://www.openrightsgroup.org/cryptoparties Cryptoparties are an easy and effective way to extend technical knowledge of encryption programs. All they require is a venue with internet access and power sources. We're also looking for people who are happy to teach others how to use encryption tools such as PGP, OTR and Tor. Are you able to provide this technical knowledge? Or are you keen to help organise the event? If so, it'd be great if you could be a key organiser of a local Cryptoparty. Reply to this email to let us know you're interested. https://www.openrightsgroup.org/cryptoparties We'll help you organise along the way and provide the essential materials to help make the event a success. There may already be an existing local ORG group in your area. https://www.openrightsgroup.org/groups/ If you'd like more information on how to organise a Cryptoparty, help can be found here: http://www.cryptoparty.in/organize/howto If you have any questions on how we could support you further, then of course just email me on campaigns(a)openrightsgroup.org So as Cryptoparty say - let's party like it‘s 31st December 1983! Thanks and best wishes, Olivia ___ Olivia Jardine Campaigns Intern Open Rights Group Follow us on: Twitter - https://www.twitter.com/OpenRightsGroup Facebook - https://www.facebook.com/openrightsgroup Google+ - https://plus.google.com/116543318055985390327 ORG relies on supporter donations to run campaigns like this. Please join us to support ORG's work. https://www.openrightsgroup.org/join This email was delivered to: mick(a)rlogin.net If you wish to opt out of future emails, you can do so here. http://action.openrightsgroup.org/ea-campaign/clientcampaign.do?ea.client.i… --------------------------------------------------------------------- Mick Morgan gpg fingerprint: FC23 3338 F664 5E66 876B 72C0 0A1F E60B 5BAD D312 http://baldric.net ---------------------------------------------------------------------

2 1

Parsing XML from commandline
by Mark Rogers 07 Nov '13

07 Nov '13

Given the following: <?xml version="1.0" encoding="utf-8"?> <Project> <Network> <Unit> <UnitType>Type1</UnitType> <SerialNumber>123456</SerialNumber> </Unit> <Unit> <UnitType>Type2</UnitType> <SerialNumber>abcdef</SerialNumber> </Unit> [... snip...] </Network> </Project> .. I need to extract all the serial numbers where UnitType is "Type2". I have never managed to get my head around XPath etc, and all the examples I find seem either too general or too complex for me to make much progress. I always end up writing some code that parses it as text which is a massive cop out. How best can I do this correctly using XML tools, and which tools should I use? Mark -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) @ 13 Clarke Rd, Milton Keynes, MK1 1LG

2 2

Re: [ALUG] Uninstall problem
by Bev Nicolson 05 Nov '13

05 Nov '13

>> >> Win. Or 'whoot', depending on your preference. Your next challenge, >> should you choose to accept it, is to get the locked file off the >> desktop. Have tried swapping to desktop and purging but no dice. Nor >> will it dragged and dropped into Trash or any other folder. >> >> Bev. >> > > On 05/11/13 14:32, Ben Whyall wrote: > How about > > open a terminal > > cd ~/Desktop > sudo rm -rf <name of file> > > Ben Off list (prob by accident) Ben suggested this and it worked. Hoorah. Cheers, Ben. To answer Brett, Gnome. Not that it matters much now. Bev

1 0

Uninstall problem
by Bev Nicolson 05 Nov '13

05 Nov '13

Somehow (and clearly it wasn't sensible) I've got Calibre on this machine but it doesn't show as installed in Synaptic so I can't remove it. What can I do? I get permission denied if I try to delete it. Thoughts? Polite ones, if poss. Own silly fault etc. Bev.

4 8