main

main@lists.alug.org.uk

3 participants
10374 discussions

Simple CMS and/or WYSIWYG HTML editor - any suggestions?
by cl＠isbd.net 25 Jan '07

25 Jan '07

What simple CMS and/or HTML editors would people recommend for a non-techie user (my wife)? She's most certainly not computer hostile but wants a simple way to create and maintain a small business web site. There's no requirement for selling or an associated database, it will just be a site comprising a few tens of pages outlining what she does with appropriate internal and external links. It doesn't have to have very sophisticated (or any) FTP management either as I can make the web site appear as a local file system if necessary. It would be nice if it made it easy to create sidebars, menus, etc. The ones I have looked at are things like:- nvu - OK, but seems to have gone to sleep as a project since version 1.0 bluefish - too techie seamonkey - Too simple, just edits an HTML page and that's about it. -- Chris Green (chris(a)halon.org.uk)

4 8

Silly Hardware Qs
by ted.harding＠nessie.mcc.ac.uk 25 Jan '07

25 Jan '07

Hi Folks, OT Linux-wise, but a lot of you are wise, hardware-wise, as-it-were-wise ... 1. I have an old desktop, whose on/off is mechanical (mechanical link from power button to switch in PSU). This link is now dodgy, and I often have to press it on/off several times before the power finally kicks in. A possible solution, after running shutdown, is simply to switch off at the mains, leaving the power switch in the "on" state; and then, when starting up again, simply switch on at the mains. I.e. simply never switch the machine itself on or off. However, I'm a bit concerned that the surge from switching on at the mains might not be good for the machine if it goes straight through to the PSU, rather than the PSU's own switch allowing it in from an already live mains cable. Any comments? 2. If a TFT/LCD screen simply goes all white (every pixel bright white) when it's switched on, regardless of whether there's any input signel, does this indicate any particular type of internal problem which it might be worth probing for (by taking the back off and looking for, e.g., a loose chip/connection)? Best wishes to all from the Scrapyard in the Fen Ted. -------------------------------------------------------------------- E-Mail: (Ted Harding) <ted.harding(a)nessie.mcc.ac.uk> Fax-to-email: +44 (0)870 094 0861 Date: 24-Jan-07 Time: 11:04:06 ------------------------------ XFMail ------------------------------

3 4

ALUG Annual Nosh
by sfr 23 Jan '07

23 Jan '07

Twelve people confirmed, and three more possibly. The Reindeer has a different menu every week, so we can't get an exact one until Monday 5 February. Here's a sample menu for a rough idea. -- sfr ======================================== Reindeer Menu Homemade Cream of Vegetable Soup with Rustic Bread £3.75 Smoked Mackerel Pate with toasted Bread £3.95 Creamy Stilton Mushrooms with toasted Bread £3.95 Loaded Potato Skins filled with Cheese and Bacon, with a Sweet Chilli Sauce £3.95 ******** Venison Steak, with Tomatoes, Mushrooms and Chunky Chips £9.95 Homemade Quorn Lasagne with Garlic Bread and Salad £6.95 Pan fried Chicken Fillet, with a Smoked Cheese Sauce, Roasted New Potatoes and a selection of Vegetables £7.50 Homemade Sausage Casserole on a bed of creamy Mashed Potato £6.95 Grilled Plaice Fillets with a Dill and Butter Sauce with Roasted New Potatoes and a selection of Vegetables £7.50 A Whole Rack of Baby Back Ribs, coated in a Barbecue Sauce with spicy Potato Wedges, Coleslaw and Onion Rings £9.95 Gammon Steak with Pineapple, with Chips and Salad £7.95 ******** Desserts Banoffi Cheesecake served with fresh Cream £3.95 Vanilla Crème Brulle served with Amaretto Biscuits £3.95 Chocolate Sponge served with a warm Chocolate Sauce £3.95 Meringue Nests filled with Fresh Fruit and Chantilly Cream £4.25

1 0

The 'nobody' user in HTML and CGI, how to best use it?
by cl＠isbd.net 19 Jan '07

19 Jan '07

I mostly understand why there is a user 'nobody' who owns all the HTML and CGI stuff in the /var/www hierarchy. However it's a bit of a pain maintaining the 'nobody' file ownership permissions there, how do other people manage this? At present I tend to do things as root and then 'chown -R nobody' which is a bit clumsy really. This is on a home system with me being the only direct user (and a few other samba file sharing users). I edit and move files around in /var/www directly as I'm really the only user most of the time and the occasional 'outside' user can just put up with anything I break for a while. The problem is that one has to be root to manipulate the files owned by nobody as one can't actually become nobody. Ooh, just tried and one *can* become nobody via root, I suppose that's one way to deal with it. So, is that what others do when doing things to files in the /var/www area, su to root and then to nobody? -- Chris Green (chris(a)halon.org.uk)

2 1

nspluginwrapper
by Peter Alcibiades 18 Jan '07

18 Jan '07

Has anyone successfully used this to install Flash 9 on AMD64 Debian? If so how? Wishing I had just installed 32 bit in the first place but dreading what it will take to move to it... Peter

4 6

Wireless router recommendations + graphics card.
by Luke Dodd 17 Jan '07

17 Jan '07

Hi, Firstly I was wondering if anyone could recommend a good wireless ADSL router. The problem with my current router (dlink 604+) is that it cant seem to handle more than one person using a substantial amount of bandwidth constantly, even though over all there is bandwidth to spare. For example only one person in the house can listen to Internet radio or stream video at once, with a 2MBit link two Internet radios at 128k should be possible! So are there any routers that would share out the bandwidth more effectively to 2-5 computers at once (cheap ones :D)? Although I don't think there is anything that can be done I may aswell ask about an issue with my graphics card. It is a Xfx Geforce 6600GT 128MB, and the problem is whenever I open up any 3D application X will crash and restart, on windows any 3d applications will cause the screen to display some horizontal odd colored lines, then go blank, then I have to do a hard reboot. I tried taking out the card and putting it back in (PCIe), no difference. I wrote a small program just opening a blank opengl window and that was enough to cause the crash. 2D performance works fine, and the card had been working properly for around 9 months before this; the drivers I am using on Linux are a fairly recent nvidia beta (1.0-9631) - 3D was working fine some time after I last updated them. Because the problem started on both operating systems at once I think it can only be a hardware problem - but I really don't want to buy a new card so any suggestions would be good. (amd x2 3800+, 1024mb ram, asus a8n-e mobo, Xfx Geforce 6600GT 128MB video card) Thanks, Luke

4 3

linux newbie - help requested
by elc＠freeola.net 15 Jan '07

15 Jan '07

Hi I've been dabbling in Windows for a few years now and thought I knew something about what I was doing. Being reluctant to spend my hard earned cash on upgrading from Win 98 SE to another Gates product, I thought I would try Linux. I am now dual booting Win 98 and Kubuntu and working with a dial up internet connection. Now I realise how much I don't know !!! My winmodem is an Intel (R) 536 EP V.92 and Kubuntu doesn't recognise it. Somewhere the internet informs me that of all the winmodems in use the one I have should have a linux driver. I've downloaded 'scanmodem' and run it and I get hundreds of lines of text that means nothing to me. Linux looks good to me, and I feel like sticking with it, if only I can get past first base. Can someone talk me thru in one syllable steps please to overcome this first hurdle.# Many thanks Eric

12 23

a/v box 2
by robert 14 Jan '07

14 Jan '07

Thanks Wayne for your help so i would just like to ask this.What is the best supported a/v box,where can i get it and how can can i make it run my xbox and vcr.Thanks for your help Robert.

2 1

a/v box
by robert johnson 14 Jan '07

14 Jan '07

Please could you tell me how to configure Linux to run my Dazzle a/v box that i got for xmas.The OS's that i'm planning to run it on is one of four:- Suse 10.2,Mandriva 06,Ubuntu 5 and Fedora 5.So if one is the easier than the rest then tell me how to configure that one as it's going to be a duel boot with Windows 98SE(hence the switch to Linux).Thanks for your help Robert ____________________________________________________________________________________ Be a PS3 game guru. Get your game face on with the latest PS3 news and previews at Yahoo! Games. http://videogames.yahoo.com/platform?platform=120121

2 1

DaDaBIK, are there no other applications like this?
by cl＠isbd.net 12 Jan '07

12 Jan '07

I'm still at my "how to create a web page for accessing a database" quest. Recently I found DaDaBIK which *seems* to be the fulfil my dreams (see http://www.dadabik.org/). Are there *really* no other applications like this around? It seems to be such an obvious thing to want but I haven't found anything else remotely like it. There are lots of database administration programs like phpmyadmin and there are quite a few database browsers but nothing quite like DaDaBIK. I'm about to install it and see if it really is as good as it seems. I'm only asking if there's anything else like it in case I'm missing something obvious that might be better. -- Chris Green (chris(a)halon.org.uk)

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main