main

main@lists.alug.org.uk

1 participants
10372 discussions

Printer sharing gone wrong(2)
by Phil Thane 19 Sep '20

19 Sep '20

Cancel previous, it works. First on PC connected to printer go to KDE printer settings and enable sharing in menu, not on tick box which is greyed out. Second on client PC (also KDE) ignore 'discovered printer' and go through set up new printer. Which it discovers all over again, but works. Weird! -- Phil Thane www.pthane.co.uk Tweet @pthane 01767 449759 07582 750607

1 0

Printer
by Phil Thane 19 Sep '20

19 Sep '20

1 0

Printer sharing gone wrong
by Phil Thane 19 Sep '20

19 Sep '20

Hello, Can anyone advise on CUPS? Wife and I have two PCs in the study, both Linux. For years we have had the printer plugged into hers via USB and Shared via CUPS setup so I can use it occasionally. It has worked like that through several changes of disro on both machines and one house move. But now it doesn't. It still prints OK from her machine but mine can't 'see' it at all. On CUPS (web interface) on Linda's machine if I go to Administration > Modify Printer there is a checkbox to 'Share this Printer' It's checked (ie blue). If I go to Printers on the menu bar and click the link to the printer in question (we've only got one) the status line says 'Not Shared'. Which probably explains why I can't print. Any suggestions? (KDE printer set up doesn't help either). -- Phil Thane www.pthane.co.uk Tweet @pthane 01767 449759 07582 750607

1 0

Printing speeds, Linux vs Windows
by Mark Rogers 04 Sep '20

04 Sep '20

If I have a large file to print, on Linux it can takes ages spooling - hours even - where on Windows it can be printing in seconds. I've noticed this many times over the years, on all types of printer I've had use of. (Large typically means graphical, eg I tried printing a 2 page A3 PDF as my Windows PC was offline, and I managed to rebuild my Windows PC, transfer the file and be ready to print before I hear a peep from the printer, and on cancelling the Linux print, Windows had the printer clunking away a few seconds later.) Is there a good reason for this? Is it just me? -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) 21 Drakes Mews, Milton Keynes, MK8 0ER

5 10

Dual booting Kubuntu install on EFI / Secure Boot Acer laptop not booting up
by Srdjan Todorovic 24 Aug '20

24 Aug '20

Hi all, I'm getting a bit stuck installing Kubuntu 20.04.1 LTS on my laptop with Secure Boot / dual booting with Win10. I can complete the installation process but Windows always boots. I can see that the ESP partition has the EFI/ubuntu/*.efi files (while I'm live-booted using the linux disk) and efibootmgr shows what appears to be correct entries for the bootup definitions for the ubuntu's .efi files. I've had conflicting advice when searching online as to where to install the bootloader - some say on the start of the disk (where MBR used to be) and some say at the Linux root partition. I've done the latter. I have booted off the CD immediately after the install to enrol using the MOK manager which comes up automaticall. The Acer UEFI "Security" menu doesn't show any files in the ubuntu folder to choose them as trusted components for boot. The Microsoft folder has entries, and also importantly the . and .. directory entries. I have already fsck.vfat the partition, initially showed incorrect free clusters but that was correct before another reinstall. Anyone have some advice please on anything I may have missed? Thanks kindly, Srdjan

2 2

nextcloud move
by Phil Thane 19 Aug '20

19 Aug '20

Hi Lugs I was amazed how easy it is to set up Nextcloud on a Raspberry Pi using the NextcloudPi image (once I'd bought a bigger SD card). It works even on a first generation Pi but some things are slow, login via the web, moving around directories and apps. I've just bought a new Pi4 which I assume will be a lot faster but I already have about 50GB of files on an external HD attached to the original Pi. It took a long time to put them there and I'd rather like to avoid doing it again. Does anyone have experience of attaching an external drive with existing data to a new Pi? During installation of NextcloudPi there's an option to use external (USB) storage but it assumes a new disk and formats it. No good in my case. If I decline that and just set up on SD card how hard is it to mount an HD later without losing the data already on it? -- Phil Thane www.pthane.co.uk Tweet @pthane 01767 449759 07582 750607

1 1

Printer Recommendations
by Steve Mynott 19 Aug '20

19 Aug '20

Can anyone recommend a small, cheap monochrome laser printer which is easy to connect using wifi from linux? I'd rather avoid HP or anyone with bad karma and expensive toner and I'm not too bothered about colour. -- Steve Mynott <steve.mynott(a)gmail.com> cv25519/ECF8B611205B447E091246AF959E3D6197190DD5

2 1

data deduplication / compare
by B D 18 Aug '20

18 Aug '20

Hi, I suppose that this could be an issue that the majority of us have faced at some point in the past. So you might have a simple solution. In last few weeks I had to move my small and old NAS box (adding some drives to make it a tad more resilient). I moved all the data to a portable drive and now I would like to merge all I have on my laptop with what's on the USB HDD. Content.. endless folders with various photos, music and video. The idea is that once files are organized the NAS will become a storage share for Nextcloud running on Pi. Any ideas are greatly appreciated Cheerio! Bart

3 2

2600 meeting at 18:00 on Friday the 7th August.
by Viperfang 04 Aug '20

04 Aug '20

Quick heads up about this months Norwich 2600 meeting, more info at http://www.norwich2600.co.uk

1 0

Re: [ALUG] main Digest, Vol 182, Issue 2
by Peter 03 Aug '20

03 Aug '20

On Mon, 03 Aug 2020 12:00:01 +0100 main-request(a)lists.alug.org.uk wrote: > Send main mailing list submissions to > main(a)lists.alug.org.uk > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.alug.org.uk/mailman/listinfo/main > or, via email, send a message with subject or body 'help' to > main-request(a)lists.alug.org.uk > > You can reach the person managing the list at > main-owner(a)lists.alug.org.uk > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of main digest..." I used unison. One or two oddities but a lot better than manually doing it.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main