- main - earth.li

Video Conversion
by Steve Fosdick 15 Nov '08

15 Nov '08

My G/F has a Sumsung E100 pocket media player. Whilst this supports a nice range of audio formats including Ogg/Vorbis and FLAC the video capabilities seem rather restrictive - MPEG4 (in an AVI container) or VMV9. I have an MPEG2 transport stream that I'd like to be able to put on that player which means converting it to one of those two supported formats. Does anyone have any recommendations of software to do this? TiA, Steve.

2 1

what a nightmare - firefox 3 - spoke too soon
by Peter Alcibiades 15 Nov '08

15 Nov '08

Spoke too soon. Now its filling up with stuff like this: ** Message: GetValue variable 2 (2) ** (firefox-bin:7254): WARNING **: Exception in gr::RangeSegment So the nphelix stuff has stopped, but these messages were there before and are not fixed. What a total pile of ***. Have to move over to Konqueror, which will take the better part of the morning owing to the insane way it handles bookmarks. Peter

2 1

what a nightmare - firefox 3
by Peter Alcibiades 15 Nov '08

15 Nov '08

It may be fixed, and if anyone else finds themselves in this nightmare, this is what it took. It seems to have been a real player library which was 32 bit, to which the 64 bit FF 3 was pointing. At least I think this is what nphelix.so is. So, reinstalling FF does not help. This generated all the error messages and segmentation errors. The smart thing to do on realizing this would just be delete all realplayer files manually from /opt/mozilla.. Now they tell me! Instead I found a real player uninstall script, which declined to run until it was pointed at /opt, and then simply deleted /opt! Fortunately there was nothing terribly vital in it, just realbasic, and and old copy of openoffice, and who needs them? Well, lots of codecs and stuff, so maybe the problems will show up later on. But at least missing files are fixable. Then I reinstalled FF again, and it seems to work. There are still sites which it fails to display correctly, but at least it is now, touch wood, not filling the hard drive with xsession error messages. Peter

2 1

Re: [ALUG] xsession errors file absolutely huge!
by Peter Alcibiades 14 Nov '08

14 Nov '08

Following Ted's suggestions and checking while .xsession-errors is small enough to cat, this is what we see (it goes on for pages already, this is just an excerpt). Probably it would be smart to reinstall Firefox. But how can it have happened, its just a perfectly standard Lenny installation, with FF upgraded to v3 through Synaptic? Real Player isn't installed by the way. And all plugins have been disabled. Peter _____________________________________ ** (firefox-bin:4231): WARNING **: Exception in gr::RangeSegment ** (firefox-bin:4231): WARNING **: Exception in gr::RangeSegment ** (firefox-bin:4231): WARNING **: Exception in gr::RangeSegment ** (firefox-bin:4231): WARNING **: Exception in gr::RangeSegment ** (firefox-bin:4231): WARNING **: Exception in gr::RangeSegment LoadPlugin: failed to initialize shared library /opt/mozilla/nphelix.so [/opt/mozilla/nphelix.so: wrong ELF class: ELFCLASS32] LoadPlugin: failed to initialize shared library /home/peter/RealPlayer/mozilla/nphelix.so [/home/peter/RealPlayer/mozilla/nphelix.so: wrong ELF class: ELFCLASS32] LoadPlugin: failed to initialize shared library /usr/lib/totem/gstreamer/libtotem-complex-plugin.so [/usr/lib/totem/gstreamer/libtotem-complex-plugin.so: undefined symbol: _ZN13nsTArray_base9sEmptyHdrE] ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) LoadPlugin: failed to initialize shared library /usr/lib/totem/gstreamer/libtotem-complex-plugin.so [/usr/lib/totem/gstreamer/libtotem-complex-plugin.so: undefined symbol: _ZN13nsTArray_base9sEmptyHdrE] ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) LoadPlugin: failed to initialize shared library /opt/mozilla/nphelix.so [/opt/mozilla/nphelix.so: wrong ELF class: ELFCLASS32] LoadPlugin: failed to initialize shared library /opt/mozilla/nphelix.so [/opt/mozilla/nphelix.so: wrong ELF class: ELFCLASS32] LoadPlugin: failed to initialize shared library /home/peter/RealPlayer/mozilla/nphelix.so [/home/peter/RealPlayer/mozilla/nphelix.so: wrong ELF class: ELFCLASS32] LoadPlugin: failed to initialize shared library /usr/lib/totem/gstreamer/libtotem-complex-plugin.so [/usr/lib/totem/gstreamer/libtotem-complex-plugin.so: undefined symbol: _ZN13nsTArray_base9sEmptyHdrE] ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) LoadPlugin: failed to initialize shared library /usr/lib/totem/gstreamer/libtotem-complex-plugin.so [/usr/lib/totem/gstreamer/libtotem-complex-plugin.so: undefined symbol: _ZN13nsTArray_base9sEmptyHdrE] ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) LoadPlugin: failed to initialize shared library /opt/mozilla/nphelix.so [/opt/mozilla/nphelix.so: wrong ELF class: ELFCLASS32] LoadPlugin: failed to initialize shared library /opt/mozilla/nphelix.so [/opt/mozilla/nphelix.so: wrong ELF class: ELFCLASS32] LoadPlugin: failed to initialize shared library /home/peter/RealPlayer/mozilla/nphelix.so [/home/peter/RealPlayer/mozilla/nphelix.so: wrong ELF class: ELFCLASS32] LoadPlugin: failed to initialize shared library /usr/lib/totem/gstreamer/libtotem-complex-plugin.so [/usr/lib/totem/gstreamer/libtotem-complex-plugin.so: undefined symbol: _ZN13nsTArray_base9sEmptyHdrE] ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) LoadPlugin: failed to initialize shared library /usr/lib/totem/gstreamer/libtotem-complex-plugin.so [/usr/lib/totem/gstreamer/libtotem-complex-plugin.so: undefined symbol: _ZN13nsTArray_base9sEmptyHdrE] ** Message: GetValue variable 1 (1) ** Message: GetValue variable 2 (2) ** Message: GetValue variable 1 (1)

1 0

xsession errors file absolutely huge!
by Peter Alcibiades 14 Nov '08

14 Nov '08

There is probably a simple explanation of this bizarre event. I got a popup message in Gnome saying that /home was out of space. It is a 200G partition, and there is not a whole lot on it, so this was puzzling. I did (after a few false starts) find . -size +10G and was astonished to be told there was just one, xsession-errors. OK, tried it with 20G.....same. Well in the end xsession-errors turned out to be 150G. Scratched my head for some minutes and then decided, why not, so I did rm. It went with no fuss. Then did du, and /home was now about 50G which seemed about right. This seemed weird enough that help was needed. Now unable to start kmail. Logged off, now unable to log back in! It wasn't the WM, since it would not work with any of them. Rebooted, and now it invoked fschk on hda6, which is where /home is, and finally after about a minute or two, it fixed something that was orphaned. And now it has loaded OpenBox and kmail perfectly fine. All the files seem to be where they should be. I am just praying that it will launch Gnome, and still more, that the files will be there when it does. What can it be? Anyone seen this before? This is Debian Lenny. By the way, sorry to have missed the Reindeer tonight, I am still not quite well enough. Next time. Peter

4 3

Re: [ALUG] Low powered PC - I've ordered some bits
by Chris G 13 Nov '08

13 Nov '08

Re: my question yesterday about low power PC suppliers I hunted around on Google for a while and found an article on the (venerable) "Tom's Hardware" site about building a low power, but capable, system. They built a 4Gb, Intel core 2 duo system that consumed only around 30 watts when running. I've ordered bits for a similar system, it uses a FoxConn motherboard with Intel G31 chipset. My parts cost for a 4Gb system with 7400 processor (the most expensive bit, 7300 was out of stock) and a 500Gb hard disk was about £250. Compared with Mini-ITX systems and/or Intel Atom based systems this seems good value to me and gives me lots more processor power and room for expansion (i.e. adding hard disks). When the bits come and I've built it I will report its actual power consumption. -- Chris Green

4 6

Linux sound analysis software?
by Srdjan Todorovic 12 Nov '08

12 Nov '08

Hello folks! I'm looking for some sound analysis software for Linux. I wish to be able to pass it a PCM wav or an MP3 and have it generate some statistics and preferably some graphs. In particular, I'm looking for amplitude/frequency graphs and harmonic analysers. I've just emeged sweep, and will play with that. I also intend to check out Audacity. http://liarliar.sourceforge.net/ is not really what I'm looking for. A google search gives me http://www.cmis.csiro.au/maaate/ (from 2002) but I can't list the contents of that directory. I had a look at sox, but that doesn't do what I want. I will keep looking, but was hoping that some kind soul would throw me some pointers. Having the ability to tag sound sample files or tag certain events (ie. tag a specific PCM sample or selection of samples) would certainly be a bonus. If nothing exists, I could be tempted to have a stab at making a similar program from scratch. Or would consider using libraries/classes in a custom app. Any thoughts, ideas or flames? Thanks, Srdjan

3 3

An PC suppliers who quote approximate power consumption?
by Chris G 12 Nov '08

12 Nov '08

Does anyone know of a PC supplier (or component supplier) who quote the actual power comsumption of their PCs? I'm looking for a moderate powered PC to run 24 hours and thus want reasonable power consumption but I want a bog standard PC not a mini ITX (or Shuttle) system as they seem expensive for not much gain. To my surprise my new Asus P5Q-VM motherboard system with 8GB of memory and 500Gb hard drive only consumes around 60 watts. That suggests that it should be possible to get a lower specification system down below 50 watts or so which would be quite acceptable. -- Chris Green

1 0

Eeepc 900
by Barry Chater 12 Nov '08

12 Nov '08

Hi Has anyone put Ubuntu 8.04 on a Eeepc 900. If so any major problems. Barry

4 3

How to diagnose this crash on exit from X?
by Chris G 11 Nov '08

11 Nov '08

I have just installed xubuntu 8.10 on new hardware. It is based on a an Asus P5Q-VM motherboard (all Intel, including graphics) has 8Gb of memory and a quad code processor. It all installed OK without any problems and ran OK. However since I set the graphics resolution to 1600x1200 (the display's default) it crashes *totally* on exiting from X. It's a total, hard, crash - CTRL/ALT/Fn won't switch to a text console, I can't ssh into the system (which I can before it has crashed) and I can't ping the system. There is one other symptom, when I try and switch to a text mode console (using CTRL/ALT/Fn) even when the system is running OK I get a message from my monitor saying "this mode isn't supported" which seems a little odd on a monitor capable of 1600x1200 at more than 60Hz. The monitor is a Dell 2001FP and I'm using the DVI-D input. Does anyone have any ideas how to diagnose this problem? I have hunted around the files in /var/log but I can't see anything that looks significant there. The xorg.conf file is totally uncustomised:- Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection -- Chris Green

4 5