- main - earth.li

None
by None 29 Dec '21

29 Dec '21

1 0

None
by None 29 Dec '21

29 Dec '21

simply a nuisance that confuses things. With my more technical hat on they are something which is difficult/impossible to implement correctly because there is no concise explanation anywhere of what they're supposed to do. ... and the same sort of problems apply to INBOX! [moan, moan, moan, mumble, mumble] -- Chris Green (chris(a)areti.co.uk) "Never ascribe to malice that which can be explained by incompetence."

1 0

None
by None 29 Dec '21

29 Dec '21

on the network; "get" or "put" the file[s] you want to transfer between Windows and Linux. This last is what I mostly do when someone sends me a Word or Excel attachment. In the latter case, I will typically export it (in Windows) as a ".csv" file which I can then tranfer back to Linux in order to run proper software on it! You can of course use the Windows telnet client as well (or the better one called "putty"). VMWare has given me a smooth interface to Windows when I need it, enabling me to continue to run Linux without re-booting. As someone remarked, it {will | would} be great {when | if} some good soul {gets | got} round to implementing something with similar power as OSS. But I can't begrudge the cost. It's been well worth while. (Of course, more recent versions of VMWare should be free of limitations such as I refer to above). Best wishes to all, Ted. -------------------------------------------------------------------- E-Mail: (Ted Harding) <Ted.Harding(a)nessie.mcc.ac.uk> Fax-to-email: +44 (0)870 094 0861 Date: 02-Mar-05 Time: 14:11:03 ------------------------------ XFMail ------------------------------

1 0

None
by None 29 Dec '21

29 Dec '21

anymore unless you *need* colour printing. I have given up on my (Epson photo 900) inkjet and it now gets the cheapest compatible carts due to how it ate vast amounts of expensive ink and would clog the nozzles on a regular basis which would require dozens of nozzle cleaning attempts (and using more precious ink) to clear the think, this was also the same with my old Epson (fwiw Epson printers have the print head built into the printer, if it gets clogged you can't replace it) but my parents HP (which had been icky) at least has the print head built into the print carts. The reason I said to go with either the HP or Brother from the posted list of choices was because they should both work with Linux :) I also recently took the decision to get photos printed from an online lab as they can do much higher quality prints than I can with less hassle and probably around the same cost and that if I need to print something in colour I will just take it to the local print bureau who have decent printers and don't charge very much at all. Oh, and I have a Samsung ML-1510 laser for cheap copies which I can refill the toner carts for not much at all :) Adam -- jabberid = quinophex(a)jabber.earth.li AFFS || http://www.affs.org.uk/ || Not a filesystem

1 0

None
by None 29 Dec '21

29 Dec '21

be doing double-pass printing on both sides of each sheet, i.e. so that the page allocations look like: [L] 40 1 [R] ---------------- --------------- sheet 1 [R] 39 2 [L] [L] 38 3 [R] ---------------- --------------- sheet 2 [R] 37 4 [L] ....... ....... [L] 22 19 [R] ---------------- --------------- sheet 10 [R] 21 20 [L] (where [L] and [R] refer to your description above). Or are you using a duplex printer which can turn the sheet over and print the next double-page on the other side immediately? If the latter there's no problem; if the former, and you have to go down [40,1] [38,3] ... [24,17] [22,19] and then turn these over and do [20,21] [18,23] ... [4,37] [2,39] then a slight modification of procedure may be needed. Now these can be folded/cut down the middle and bound into a book. You might either cut each sheer very exactly down the middle and use a glue binder, or place the sheets on top of each other as shown above and sew (or otherwise fix) them together down the middle and then fold them. In the latter case, a) You will need to guillotine the outside edges so that they are aligned flat, not bevelled (because of the thickness of the paper which pushes the inner sheets further out than the outer sheets). Then: b) It makes a much better job if, when you lay out the pages, you vary the page-offset (the gap from the left-hand margin) from sheet to sheet so that the distance from the righthand edge of the paper is always the same after guillotining off the bevel. What this means is that the central pages must be printed progressively nearer the centre-line of the sheet than the outer pages. This little detail is also readily arrangeable with groff (it's a rather professional detail, which you should find provision for in proper DTP/typesetting software, but would probably search for in vain in the likes of OpenOffice or Word. I don't know about Scribus). It may need some experimentation, though, in order to get it right (for which your trial copies, to be passed round the 5 or so friends for proof-reading etc., provide a perfect opportunity). Come back if you want any further hints. Best wishes, Ted. -------------------------------------------------------------------- E-Mail: (Ted Harding) <Ted.Harding(a)nessie.mcc.ac.uk> Fax-to-email: +44 (0)870 094 0861 [NB: New number!] Date: 03-Dec-04 Time: 16:04:08 ------------------------------ XFMail ------------------------------

1 0

None
by None 29 Dec '21

29 Dec '21

scenes' stuff Access has something similar to Oracle's Row Id which is effectively a 'handle' for a row. This is what allows it to delete 'this' record. The front ends for mysql must have something similar so that when you are, for example, scrolling down a list of records there is something which tells you which record you're at. -- Chris Green (chris(a)areti.co.uk) "Never ascribe to malice, that which can be explained by incompetence."

1 0

None
by None 29 Dec '21

29 Dec '21

1 0

None
by None 29 Dec '21

29 Dec '21

1 0

None
by None 29 Dec '21

29 Dec '21

1 0

None
by None 29 Dec '21

29 Dec '21

1 0