March 2015 - main

[ALUG Announce] 3rd Monday Monthly Ipswich Social Meeting : The Mulberry Tree
by samwise 16 Mar '15

16 Mar '15

ALUG Announce Please send announcements to Announce(a)lists.alug.org.uk Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce ----- The monthly "Third Monday" ALUG Ipswich Social Meeting is back today, 16th March, at 20:00: The Mulberry Tree 5 Woodbridge Road IPSWICH IP4 2EA Tel: 01473 225776 Map/Directions URI: http://maps.google.co.uk/?q=IP4+2EA WWW: https://www.facebook.com/MULBERRYHOSPITALITY The Mulberry Tree, previously known as The Milestone Beer House, is a grade 2 listed building in the centre of Ipswich. It is located at the intersection between Woodbridge Road and the A1156, across the road from the old Odeon cinema and not far from the Regent Theatre. It re-opened on Thursday March 29th 2012 after a major refurbishment, under its original name of The Mulberry House and has already begun to regain a good reputation for its selection of beers and ales. It has a sizeable car park to the rear of the building. All are welcome, novices and experienced users. Feel free to ask for further information on the Main ALUG mailing list. Cheers, Peter. -- I am aiming to run the London Marathon 2015 in aid of the PSP Association. All sponsorship gratefully received. :) http://www.bagshot-row.org/marathonformum ----- Send discussion replies to main(a)lists.alug.org.uk (Reply-To set) Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce

1 0

Alternative to Mencoder for Stop Motion Animation
by steve-ALUG＠hst.me.uk 09 Mar '15

09 Mar '15

I've been successfully using mencoder for my sprog who makes the occasional stop motion animation video thusly mencoder mf://*.JPG -ovc xvid -xvidencopts bitrate=2000 -fps 5 -o clip.avi mencoder isn't installed any more because its codebase is in a bit of a state. Does anyone have any experience of a similar simple command-line replacement? I've tried an animation suite program but it brings my tired old laptop to its knees and makes it run too hot, hence the command line request. I've googled but I still haven't found what I'm looking for.... Cheers Steve

1 1

[ALUG Announce] ALUG Norwich Pub Meet Thursday 12th March
by Viperfang 09 Mar '15

09 Mar '15

ALUG Announce Please send announcements to Announce(a)lists.alug.org.uk Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce ----- Hello Norwich Aluggers, Our monthly ALUG Norwich social meeting will be held this Thursday, 12th March at The Coach and Horses (82 Thorpe Road, Norwich, NR1 1BA). The meeting officially starts at 8pm, although some people may arrive earlier. More information on those people can be found on the list and the IRC channel. If you are unsure if you will recognise us then make yourself and your intent to attend known by either posting on list or visiting us on IRC so we can look out for you rather than hiding in the corner. Optionally you could ask at the bar if they know where the geeky computer weirdos are and they'll point you in the right direction (seriously!). Another possibility is look for heaps of electronics on a table that may possibly look like movie props that would used for detonating explosives. Feel free to bring electronics/laptops/gadgets to the meet, you will by no means be alone. Ben Bewick aka Viperfang NB: This mail is automated, please refer to the usual sources for more information. ALUG Contact Details: Website : http://www.alug.org.uk/ IRC : #alug on irc.alug.org.uk List : http://lists.alug.org.uk/mailman/listinfo Twitter : http://twitter.com/anglianlug Identica: TBA Facebook: http://www.facebook.com/group.php?gid=2381613902 ----- Send discussion replies to main(a)lists.alug.org.uk (Reply-To set) Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce

1 0

Recovering data from a disk image
by Mark Rogers 05 Mar '15

05 Mar '15

I have a disk image taken around ten years ago. It has a .dsk file extension, which might be a clue to what I used to take the image but more likely is something I picked because it was a disk! I'm trying to recover data from it but none of my normal tools are recognising it. Eg: $ file myfile.dsk myfile.dks: data $ fdisk -l myfile.dsk Disk myfile.dsk: 39.7 GB, 39711651840 bytes 255 heads, 63 sectors/track, 4828 cylinders, total 77561820 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk myfile.dsk doesn't contain a valid partition table Testdisk isn't giving me any clear results (it can find an ext3 partition but doesn't seem then able to extract anything from it). I'm pretty sure this was a straight image from a physical disk (it could have been a virtual disk but it's 39GB so I doubt that). It's quite possible that the default geometry settings in tesdisk etc are wrong but short of random guesses I don't know what to try. I am confident my data is there; if I view the raw data I am able to find a lot of it (mostly scripts which are therefore in plain text). Not that this is a very easy way to extract data! Suggestions as to what I should do to recover data? If it helps, the first 4096 bytes are all zero (so there's no obvious file header). Mark -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) 21 Drakes Mews, Milton Keynes, MK8 0ER

5 14

2600 meeting at 18:00 on Friday the 6th March.
by Viperfang 03 Mar '15

03 Mar '15

Quick heads up about this months Norwich 2600 meeting, more info at http://www.norwich2600.co.uk

1 0