Hi folks,
I posted the following to the ubuntu alsa forums with the hope of some pointers, but nothing has come back. Can anyone from alug offer anything further on this?
<snip> I've newly installed ubuntu 14.04 on to a Gigabyte GA-J1800N-D2H board, and am trying to get sound working with a Samsung S24D590L monitor through the HDMI cable. Pulse audio control detects Port: HDMI / DisplayPort (plugged in), and the volume meter is showing it is responding to the levels, but no actual sound can be heard. Alsamixer shows the card as HDA Intel PCH and the chip as Intel Valleyview2 HDMI, and I've checked nothing is muted. Monitor volume is not muted. There is no output from "beep". </snip>
I was asked for the output of wget -O alsa-info.sh http://www.alsa-project.org/alsa-info.sh && chmod +x ./alsa-info.sh && ./alsa-info.sh --upload, which is now here: http://www.alsa-project.org/db/?f=1a91c118837f2f6038ddb73c397dae4bf340e0b5
I did wonder if I need to install some dedicated drivers from RealTek, such as LinuxPkg_5.18rc8.tar.bz2?
And yes, this is the same board I posted about last week - finally managed to create a dos boot stick it would respond to (had to make it from a virtualbox running windows), upgraded the bios from F2 to F4, and off we went.
Thanks,
Jenny