Hi again,
I've got some free time today and have been playing with the emailer again. I've managed to build a 3.6 kernel a while ago but when I tried to upload the V2 stuff I had problems.
Today I made up a new cable thinking that might be the issue, but it hasn't helped. I can get a boot log just fine, but when I run pbltool with "sudo ./pbltool -f /dev/ttyUSB0 oe-install.pbl" I get:
Prodding... Handshaking... Done handshaking Compressed return block? Flushing: 0x00 Flushing: 0x0E Flushing: 0x00 Flushing: 0x82 Flushing: 0x00 Flushing: 0x52 Flushing: 0x00 Flushing: 0x04 Flushing: 0x09 Flushing: 0x1F Flushing: 0x05 Flushing: 0x10 Flushing: 0x40 Flushing: 0xFE Flushing: 0x7B Flushing: 0x0E Flushing: 0xB0 Flushing: 0x9A Compressed return block?
Which then repeats forever. I've tried editing oe-install.pbl to change the baud rate (38400, 19200, 9600) but it makes no difference. I also looked for pblq but the link on http://cowlark.com/amstrad/index.html is broken.
Any ideas?
Thanks!
Ok, so I just tried it with debugging and it has booted!
Cheers, Ed
On Mon, Nov 26, 2012 at 1:18 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Hi again,
I've got some free time today and have been playing with the emailer again. I've managed to build a 3.6 kernel a while ago but when I tried to upload the V2 stuff I had problems.
Today I made up a new cable thinking that might be the issue, but it hasn't helped. I can get a boot log just fine, but when I run pbltool with "sudo ./pbltool -f /dev/ttyUSB0 oe-install.pbl" I get:
Prodding... Handshaking... Done handshaking Compressed return block? Flushing: 0x00 Flushing: 0x0E Flushing: 0x00 Flushing: 0x82 Flushing: 0x00 Flushing: 0x52 Flushing: 0x00 Flushing: 0x04 Flushing: 0x09 Flushing: 0x1F Flushing: 0x05 Flushing: 0x10 Flushing: 0x40 Flushing: 0xFE Flushing: 0x7B Flushing: 0x0E Flushing: 0xB0 Flushing: 0x9A Compressed return block?
Which then repeats forever. I've tried editing oe-install.pbl to change the baud rate (38400, 19200, 9600) but it makes no difference. I also looked for pblq but the link on http://cowlark.com/amstrad/index.html is broken.
Any ideas?
Thanks!
Hmm... worked that once but no dice a second time... is this a common issue?
On Mon, Nov 26, 2012 at 1:32 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Ok, so I just tried it with debugging and it has booted!
Cheers, Ed
On Mon, Nov 26, 2012 at 1:18 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Hi again,
I've got some free time today and have been playing with the emailer again. I've managed to build a 3.6 kernel a while ago but when I tried to upload the V2 stuff I had problems.
Today I made up a new cable thinking that might be the issue, but it hasn't helped. I can get a boot log just fine, but when I run pbltool with "sudo ./pbltool -f /dev/ttyUSB0 oe-install.pbl" I get:
Prodding... Handshaking... Done handshaking Compressed return block? Flushing: 0x00 Flushing: 0x0E Flushing: 0x00 Flushing: 0x82 Flushing: 0x00 Flushing: 0x52 Flushing: 0x00 Flushing: 0x04 Flushing: 0x09 Flushing: 0x1F Flushing: 0x05 Flushing: 0x10 Flushing: 0x40 Flushing: 0xFE Flushing: 0x7B Flushing: 0x0E Flushing: 0xB0 Flushing: 0x9A Compressed return block?
Which then repeats forever. I've tried editing oe-install.pbl to change the baud rate (38400, 19200, 9600) but it makes no difference. I also looked for pblq but the link on http://cowlark.com/amstrad/index.html is broken.
Any ideas?
Thanks!
Ok, got it finally.
Now installing to NAND so I guess I wont need this much now anyhow!
On Mon, Nov 26, 2012 at 2:00 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Hmm... worked that once but no dice a second time... is this a common issue?
On Mon, Nov 26, 2012 at 1:32 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Ok, so I just tried it with debugging and it has booted!
Cheers, Ed
On Mon, Nov 26, 2012 at 1:18 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Hi again,
I've got some free time today and have been playing with the emailer again. I've managed to build a 3.6 kernel a while ago but when I tried to upload the V2 stuff I had problems.
Today I made up a new cable thinking that might be the issue, but it hasn't helped. I can get a boot log just fine, but when I run pbltool with "sudo ./pbltool -f /dev/ttyUSB0 oe-install.pbl" I get:
Prodding... Handshaking... Done handshaking Compressed return block? Flushing: 0x00 Flushing: 0x0E Flushing: 0x00 Flushing: 0x82 Flushing: 0x00 Flushing: 0x52 Flushing: 0x00 Flushing: 0x04 Flushing: 0x09 Flushing: 0x1F Flushing: 0x05 Flushing: 0x10 Flushing: 0x40 Flushing: 0xFE Flushing: 0x7B Flushing: 0x0E Flushing: 0xB0 Flushing: 0x9A Compressed return block?
Which then repeats forever. I've tried editing oe-install.pbl to change the baud rate (38400, 19200, 9600) but it makes no difference. I also looked for pblq but the link on http://cowlark.com/amstrad/index.html is broken.
Any ideas?
Thanks!
Hmmm... so now I'm having trouble installing to NAND. I've done it 4 times so far using different USB drives. I get a couple of messages about bad blocks, and then when u-boot starts I get:
Loading from device 0: <NULL> at 0x8000000 (offset 0x0) Image Name: Linux-2.6.16-omap2 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1576804 Bytes = 1.5 MB Load Address: 10008000 Entry Point: 10008000 ** Read error on 0 ## Booting image at 11d00000 ... Image Name: Linux-2.6.16-omap2 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1576804 Bytes = 1.5 MB Load Address: 10008000 Entry Point: 10008000 Verifying Checksum ... Bad Data CRC E3 #
o_O Has anyone else had this problem? Sorry for the torrent of emails!
On Mon, Nov 26, 2012 at 2:25 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Ok, got it finally.
Now installing to NAND so I guess I wont need this much now anyhow!
On Mon, Nov 26, 2012 at 2:00 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Hmm... worked that once but no dice a second time... is this a common issue?
On Mon, Nov 26, 2012 at 1:32 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Ok, so I just tried it with debugging and it has booted!
Cheers, Ed
On Mon, Nov 26, 2012 at 1:18 PM, Edward Robbins edd.robbins@googlemail.com wrote:
Hi again,
I've got some free time today and have been playing with the emailer again. I've managed to build a 3.6 kernel a while ago but when I tried to upload the V2 stuff I had problems.
Today I made up a new cable thinking that might be the issue, but it hasn't helped. I can get a boot log just fine, but when I run pbltool with "sudo ./pbltool -f /dev/ttyUSB0 oe-install.pbl" I get:
Prodding... Handshaking... Done handshaking Compressed return block? Flushing: 0x00 Flushing: 0x0E Flushing: 0x00 Flushing: 0x82 Flushing: 0x00 Flushing: 0x52 Flushing: 0x00 Flushing: 0x04 Flushing: 0x09 Flushing: 0x1F Flushing: 0x05 Flushing: 0x10 Flushing: 0x40 Flushing: 0xFE Flushing: 0x7B Flushing: 0x0E Flushing: 0xB0 Flushing: 0x9A Compressed return block?
Which then repeats forever. I've tried editing oe-install.pbl to change the baud rate (38400, 19200, 9600) but it makes no difference. I also looked for pblq but the link on http://cowlark.com/amstrad/index.html is broken.
Any ideas?
Thanks!
-
Edward Robbins