Hi again,
I've got some free time today and have been playing with the emailer again. I've managed to build a 3.6 kernel a while ago but when I tried to upload the V2 stuff I had problems.
Today I made up a new cable thinking that might be the issue, but it hasn't helped. I can get a boot log just fine, but when I run pbltool with "sudo ./pbltool -f /dev/ttyUSB0 oe-install.pbl" I get:
Prodding... Handshaking... Done handshaking Compressed return block? Flushing: 0x00 Flushing: 0x0E Flushing: 0x00 Flushing: 0x82 Flushing: 0x00 Flushing: 0x52 Flushing: 0x00 Flushing: 0x04 Flushing: 0x09 Flushing: 0x1F Flushing: 0x05 Flushing: 0x10 Flushing: 0x40 Flushing: 0xFE Flushing: 0x7B Flushing: 0x0E Flushing: 0xB0 Flushing: 0x9A Compressed return block?
Which then repeats forever. I've tried editing oe-install.pbl to change the baud rate (38400, 19200, 9600) but it makes no difference. I also looked for pblq but the link on http://cowlark.com/amstrad/index.html is broken.
Any ideas?
Thanks!