Hi, Looking for some help with an Amstrad E3 I was given recently. I'm a computer technician, but have very little experience with Linux based systems ( all our systems at work are Windows). I was looking for a small screen to fit in the Comanche helicopter cockpit simulator I'm building. All it has to do is display some web pages and change them based on about 8 different key presses. I have set up a machine with Ubuntu on it and it is talking to the E3. I followed the instructions here http://wiki.earth.li/E3_Getting_Started and everything went fine until the last "bootm" command. It did give a lot of info about the image but didn't end with a shell prompt. Instead I get a message: " kernel panic - not syncing: VFS: unable to mount root FS on unknown block(1,0)" I do get the "penguin" and a load of text on the E3 screen before the error, so I rekon I'm not far away. I've also tried the system from 2.6.16 here http://the.earth.li/pub/e3/ with exactly the same results. Can somebody advise what I'm doing wrong please ? Many thanks in advance, Andy