[E3-hacking] pbltool problem

[Edward Robbins]

Ok, so I just tried it with debugging and it has booted!

Cheers,
Ed

On Mon, Nov 26, 2012 at 1:18 PM, Edward Robbins
<edd.robbins at googlemail.com> wrote:
> Hi again,
>
> I've got some free time today and have been playing with the emailer
> again. I've managed to build a 3.6 kernel a while ago but when I tried
> to upload the V2 stuff I had problems.
>
> Today I made up a new cable thinking that might be the issue, but it
> hasn't helped. I can get a boot log just fine, but when I run pbltool
> with "sudo ./pbltool -f /dev/ttyUSB0 oe-install.pbl" I get:
>
> Prodding...
> Handshaking...
> Done handshaking
> Compressed return block?
> Flushing: 0x00
> Flushing: 0x0E
> Flushing: 0x00
> Flushing: 0x82
> Flushing: 0x00
> Flushing: 0x52
> Flushing: 0x00
> Flushing: 0x04
> Flushing: 0x09
> Flushing: 0x1F
> Flushing: 0x05
> Flushing: 0x10
> Flushing: 0x40
> Flushing: 0xFE
> Flushing: 0x7B
> Flushing: 0x0E
> Flushing: 0xB0
> Flushing: 0x9A
> Compressed return block?
>
> Which then repeats forever. I've tried editing oe-install.pbl to
> change the baud rate (38400, 19200, 9600) but it makes no difference.
> I also looked for pblq but the link on
> http://cowlark.com/amstrad/index.html is broken.
>
> Any ideas?
>
> Thanks!