[E3-hacking] E1
Ralph Corderoy
ralph at inputplus.co.uk
Tue Sep 30 11:03:57 BST 2008
Hi David,
> Plugging this into a PC with a straight-through serial cable shows
> nothing at all on boot. However, pinging it with the usual 0x1b bytes
> on startup triggers PBL and the LEDs start flashing. But I don't get
> anything back down the cable, so I can't talk to it. So either the
> protocol's different, or else it's non-standard wiring (or my cable is
> broken), or the E1 has a fried UART, or it might not be a standard
> port after all and may need level-shifting.
Or baud rate? You could be right on the level-shifting. Any clue from
peering inside?
Cheers,
Ralph.
More information about the e3-hacking
mailing list