On Sunday 03 September 2006 19:05, Jonathan McDowell wrote:
On Fri, Sep 01, 2006 at 01:57:40PM +0100, Antony Stone wrote:
- How do I enable the E3's keyboard/s so that I can use the ash shell
from there as well as (or instead of) on the end of the serial port?
You need to edit /etc/inittab and ensure there's a line like:
1:2345:respawn:/sbin/getty 38400 tty1
I believe the default initrd only has a getty on the serial console.
Ah, right, that did the trick - thanks :)
I'd forgotten to check something as basic as whether getty was listening - I'm too used to distros spawning at least 6 of them that I hadn't looked here :)
Have you looked at the E3_release_v2.tar.gz tarball in ftp://the.earth.li/pub/e3/ ? It's not 100% reliable, but I've had a few reports of success from people.
Yes, I found that whilst poking around in my downloads this afternoon, and I can confirm that:
a) it works fine for me too (on an E3 bought in March from Tesco, and never plugged into a phone line)
b) the time taken to write the NAND backup to the USB drive was much less than the README or the on-screen instructions suggested - just a few minutes in total
Now I just need to buy a few USB Ethernet adapters to get the E3s plugged in to the world sensibly :)
Well done with the project, and thanks for your help (and thanks for the UKUUG talk, too, by the way).
Antony.