On Tue, Mar 07, 2006 at 07:33:38PM +0000, Matt Callow wrote:
attached is a patch to enable the modem on the e3. The patch should be applied after Jonathans patches.
It is then accessable as /dev/ttyS1. I use micrcom to talk to it.
I get "Division by 0 in kernel" errors with this patch; I think you need to multiply the BASE_BAUD by 16 to get the uart_clk. I've put my patch up at:
http://the.earth.li/pub/e3/2.6.15/06-ams-delta-modem.diff
It only touches the board configuration file, but appears to work fine for me.
So far, I've managed to get it connected to the phone line as a speaker phone, but I can't get any sound through the handset.
Likewise;
AT+FCLASS=8 AT+VSP=1 ATDT123
gives me the speaking clock on the speaker (I think that's all I needed to type).
Have you tried playing with the AT+VLS options at all? I wondered if that might switch between the two.
J.