On Thursday 07 July 2005 15:35, Matt Evans wrote: [...]
That looks like a bargain! Also - the picture's a little small but that looks very much like the T610 cable I have, so hopefully same manufacturer. (There's a little rectangular 'pod' with a PCB inside.) If it is the same as the one I have then it has the advantage that it's not sealed into a resin glob, but there's the disadvantage that it needs a mod for 5V which requires soldering a tiny leg on the PL2303.
Well, I now have one. I should be getting scans of it reasonably soon. The phone end of the cable is marked N-5100; oddly, that seems to be the only mention of what kind of phone it's for...
The plastic box the PCB is inside has a space for a switch, marked L and R, but there is no switch there and there are no pads on the PCB for installation of one. I suspect someone's been saving money.
Here's the PL2303 data sheet:
http://tech.prolific.com.tw/visitor/fcabdl.asp?fid=33962507
I can't tell whether my device is set up for 5V or 3.3V; I'll just have to plug it in and measure it. Is it known that the E2 *doesn't* work with 3.3V? And what's the modification I need to do?