But the board we have working (as anyone who's "broken in" to an E3 will know) is the 5910. We're not going to make a board specially for this but will simply re-use E3 boards but will probably go the trouble of making some form of case to house the board and the display.
Cliff
-----Original Message----- From: jasmine@electronpusher.org [mailto:jasmine@electronpusher.org] Sent: 15 June 2005 18:15 To: cliff@ourcottage.plus.com; Discussion of the Amstrad E3 emailer hardware/software Subject: Re: [E3-hacking] Making life easy for you
Hi Cliff,
On Wed, 15 Jun 2005, Cliff wrote:
You'd basically get an OMAP 5910 board (150MHz ARM925T + 150MHz C55x DSP)
...this is a shame. Couldn't we have a newer OMAP? Even 1623, with its stacked DDR part, would be a major improvement over 5910.
2420 would, of course, be a killer part :-)
-J., ex-TI
e3-hacking mailing list e3-hacking@earth.li http://www.earth.li/cgi-bin/mailman/listinfo/e3-hacking
This e-mail and any attachments are confidential and intended exclusively for the addressee. If you are not the intended recipient please delete it from your system and notify the sender immediately. This message is attributed to the sender and may not necessarily reflect the views of Amstrad Plc or its subsidiaries.
For further information on Amstrad Plc please visit our website: www.amstrad.com
Amstrad Plc. Brentwood House 169 Kings Road Brentwood Essex CM14 4EF Registered in England : No. 955321