[E3-hacking] [PATCH v2 5/6] OMAP1: Amstrad Delta: add support for camera

Janusz Krzysztofik jkrzyszt at tis.icnet.pl
Sat Sep 11 02:27:29 BST 2010


This patch adds configuration data and initialization code required for camera 
support to the Amstrad Delta board.

Three devices are declared: SoC camera, OMAP1 camera interface and OV6650 
sensor.

Default 12MHz clock has been selected for driving the sensor. Pixel clock has 
been limited to get reasonable frame rates, not exceeding the board 
capabilities. Since both devices (interface and sensor) support both pixel 
clock polarities, decision on polarity selection has been left to drivers.
Interface GPIO line has been found not functional, thus not configured.

Created and tested against linux-2.6.36-rc3.

Works on top of previous patches from the series, at least 1/6, 2/6 and 3/6.

Signed-off-by: Janusz Krzysztofik <jkrzyszt at tis.icnet.pl>
---
v1->v2 changes:
- no functional changes,
- refreshed against linux-2.6.36-rc3


 arch/arm/mach-omap1/board-ams-delta.c |   45 ++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)


diff -upr linux-2.6.36-rc3.orig/arch/arm/mach-omap1/board-ams-delta.c 
linux-2.6.36-rc3/arch/arm/mach-omap1/board-ams-delta.c
--- linux-2.6.36-rc3.orig/arch/arm/mach-omap1/board-ams-delta.c	2010-09-03 22:29:00.000000000 +0200
+++ linux-2.6.36-rc3/arch/arm/mach-omap1/board-ams-delta.c	2010-09-10 22:01:24.000000000 +0200
@@ -19,6 +19,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
+#include <media/soc_camera.h>
+
 #include <asm/serial.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,6 +34,7 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
+#include <mach/camera.h>
 
 #include <mach/ams-delta-fiq.h>
 
@@ -213,10 +216,37 @@ static struct platform_device ams_delta_
 	.id	= -1
 };
 
+static struct i2c_board_info ams_delta_camera_board_info[] = {
+	{
+		I2C_BOARD_INFO("ov6650", 0x60),
+	},
+};
+
+static struct soc_camera_link __initdata ams_delta_iclink = {
+	.bus_id         = 0,	/* OMAP1 SoC camera bus */
+	.i2c_adapter_id = 1,
+	.board_info     = &ams_delta_camera_board_info[0],
+	.module_name    = "ov6650",
+};
+
+static struct platform_device ams_delta_camera_device = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &ams_delta_iclink,
+	},
+};
+
+static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
+	.camexclk_khz	= 12000,	/* default 12MHz clock, no extra DPLL */
+	.lclk_khz_max	= 1334,		/* results in 5fps CIF, 10fps QCIF */
+};
+
 static struct platform_device *ams_delta_devices[] __initdata = {
 	&ams_delta_kp_device,
 	&ams_delta_lcd_device,
 	&ams_delta_led_device,
+	&ams_delta_camera_device,
 };
 
 static void __init ams_delta_init(void)
@@ -225,6 +255,20 @@ static void __init ams_delta_init(void)
 	omap_cfg_reg(UART1_TX);
 	omap_cfg_reg(UART1_RTS);
 
+	/* parallel camera interface */
+	omap_cfg_reg(H19_1610_CAM_EXCLK);
+	omap_cfg_reg(J15_1610_CAM_LCLK);
+	omap_cfg_reg(L18_1610_CAM_VS);
+	omap_cfg_reg(L15_1610_CAM_HS);
+	omap_cfg_reg(L19_1610_CAM_D0);
+	omap_cfg_reg(K14_1610_CAM_D1);
+	omap_cfg_reg(K15_1610_CAM_D2);
+	omap_cfg_reg(K19_1610_CAM_D3);
+	omap_cfg_reg(K18_1610_CAM_D4);
+	omap_cfg_reg(J14_1610_CAM_D5);
+	omap_cfg_reg(J19_1610_CAM_D6);
+	omap_cfg_reg(J18_1610_CAM_D7);
+
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 
 	omap_board_config = ams_delta_config;
@@ -236,6 +280,7 @@ static void __init ams_delta_init(void)
 	ams_delta_latch2_write(~0, 0);
 
 	omap1_usb_init(&ams_delta_usb_config);
+	omap1_set_camera_info(&ams_delta_camera_platform_data);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
 #ifdef CONFIG_AMS_DELTA_FIQ



More information about the e3-hacking mailing list