[E3-hacking] [PATCH] Camera Driver
Piotr Michniewski
pmichniewski at gmail.com
Sun Sep 17 21:43:03 BST 2006
2006/9/17, Matt Callow <mc-lists at tesco.net>:
> Piotr Michniewski wrote:
> > Well, I've modified your driver to compile using 2.6.17 (one liner)
> OK. What did you have to change?
--- sensor_ov6650.c 2006-09-17 12:45:10.000000000 +0200
+++ sensor_ov6650.c.mod 2006-09-17 12:53:35.000000000 +0200
@@ -874,7 +874,7 @@
return (void *)sensor;
}
-struct camera_sensor camera_sensor_if = {
+struct omap_camera_sensor camera_sensor_if = {
.version = 0x01,
.name = "OV6650",
.init = ov6650sensor_init,
-----------------------
Also the Makefile needed some tuning, but I think it's ok:
# Makefile for OMAP1/2 camera driver
obj-$(CONFIG_VIDEO_OMAP_CAMERA) += omapcamera.o
obj-$(CONFIG_VIDEO_CAMERA_SENSOR_OV9640) += sensor_ov9640.o
obj-$(CONFIG_VIDEO_CAMERA_SENSOR_OV6650) += sensor_ov6650.o
objs-y$(CONFIG_MACH_AMS_DELTA) += omap1510cam.o
objs-y$(CONFIG_ARCH_OMAP16XX) += omap16xxcam.o camera_core.o
objs-y$(CONFIG_MACH_OMAP_H3) += h3_sensor_power.o
objs-y$(CONFIG_MACH_OMAP_H4) += h4_sensor_power.o
omapcamera-objs := $(objs-yy)
EXTRA_CFLAGS = -I$(src)/..
-----------------------
> I'm not using udev, so I created the device myself.
> crw-r--r-- 1 root root 81, 0 Apr 17 2006 /dev/video
When I load the Virtual Video Driver, the device is created
automatically, so that's not the problem.
> I see the following dmesg output:
>
> Linux video capture interface: v1.00
> OMAP Camera driver initialzing
> omap1510cam_init
> cam_iobase FEFB6800
> omap1510_cam_init
> omap1510cam_enable
> exit omap1510cam_enable
> exit omap1510cam_init
> omap1510cam_set_xclk requested=21000000 actual=24000000
> OV6650 sensor chip
> 6650sensor_try_format sizeimage=202752
> omap-camera: OMAP1510 Camera Parallel interface with OV6650 sensor
> ov6650sensor_calc_xclk
> ov6650sensor_calc_xclk returning 24000000
> omap1510cam_init_dma
> omap-camera: registered device video0 [v4l2]
I don't get anything...
> Are you sure you enabled the camera in the kernel config? The patch
> doesn't do it for you?
I'm not using defconfig, but:
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_OMAP_CAMERA=m
# CONFIG_VIDEO_CAMERA_SENSOR_OV9640 is not set
CONFIG_VIDEO_CAMERA_SENSOR_OV6650=y
--
Piotr Michniewski
More information about the e3-hacking
mailing list