[E3-hacking] Universal E2/E3 serial interface design
Jasmine Strong
jasmine at electronpusher.org
Sat Jan 21 16:09:17 GMT 2006
On 21 Jan 2006, at 16:02, Ian Stirling wrote:
>
> The 1K resistors are not quite adequate protection on the input of
> IC1A.
I agree, and I would use 4k7 resistors here.
> Four diodes, one each between the tip/ring connections, and VCC/
> ground would be a good idea.
> 1N4148 or similar would be fine.
Or a chip diode pack.
And "SLEAVE" should be "SLEEVE".
-J.
More information about the e3-hacking
mailing list