I'm running Debian Testing and I did an update yesterday. I think one, or more, of the packages was X related. I really can't remember any more than that. One of the new packages was updated source code for my kernel which is 2.4.19. I compiled and installed that. When I rebooted and started KDE, my normal desktop, the whole machine froze after a short time. Absolutely nothing worked. I have the magic sysrq key option in the kernel activated but even that did nothing. Only a hard reset would work. I tried booting using my previous kernel with the same results so I've ruled out the new kernel. I have since tried Icewm,as it's less complicated than KDE, and it appears to work after a fashion. I am writing this with my normal email application running under Icewm. There is a 'but' of course. If I try to switch consoles using <ctrl><alt><Fn> the machine locks up immediately as before. If I try to exit Icewm the machine locks up even if I exit using <ctrl><alt><backspace>. I am assuming that this is an X problem. I have no idea where, or how, to start looking and some advice is sorely needed and would be very welcome. Barry Samuels XFree log appended below in case it means anything to anybody. ====================================================================== XFree86 Version 4.2.1 (Debian 4.2.1-3 20021016191246 branden@deadbeast.net) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18 i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Nov 4 14:10:40 2002 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Iiyama Vision Master 17" (**) | |-->Device "Matrox G400" (**) |-->Input Device "Generic Keyboard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (**) Option "XkbVariant" "uk" (**) XKB: variant: "uk" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Configured Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000582c, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1022,700c card 0000,0000 rev 11 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1022,700d card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1022,7410 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1022,7411 card 0000,0000 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:07:3: chip 1022,7413 card 0000,0000 rev 01 class 06,80,00 hdr 00 (II) PCI: 00:07:4: chip 1022,7414 card 0000,0000 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:08:0: chip 1000,0020 card 1000,1040 rev 01 class 01,00,00 hdr 80 (II) PCI: 00:08:1: chip 1000,0020 card 1000,1040 rev 01 class 01,00,00 hdr 80 (II) PCI: 00:0b:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80 (II) PCI: 00:0b:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80 (II) PCI: 00:0e:0: chip 1002,4752 card 0000,0000 rev 27 class 03,00,00 hdr 00 (II) PCI: 00:0f:0: chip 10b7,9805 card 10f1,2462 rev 78 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 10b7,9805 card 10f1,2462 rev 78 class 02,00,00 hdr 00 (II) PCI: 01:05:0: chip 102b,0525 card 102b,2179 rev 05 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xea000000 - 0xea8fffff (0x900000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B] (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI: (0:14:0) ATI Mach64 GR rev 39, Mem @ 0xe9000000/24, 0xe8006000/12, I/O @ 0x2000/8 (--) PCI:*(1:5:0) Matrox MGA G400 AGP rev 5, Mem @ 0xf8000000/25, 0xea800000/14, 0xea000000/23 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xe8005c00 - 0xe8005c7f (0x80) MX[B] [1] -1 0 0xe8005800 - 0xe800587f (0x80) MX[B] [2] -1 0 0x000dc000 - 0x000dcfff (0x1000) MX[B] [3] -1 0 0xe8007000 - 0xe8007fff (0x1000) MX[B] [4] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] [5] -1 0 0xea000000 - 0xea7fffff (0x800000) MX[B](B) [6] -1 0 0xea800000 - 0xea803fff (0x4000) MX[B](B) [7] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) [8] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [9] -1 0 0x00001800 - 0x0000187f (0x80) IX[B] [10] -1 0 0x00001c38 - 0x00001c3f (0x8) IX[B] [11] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B] [12] -1 0 0x00001400 - 0x000014ff (0x100) IX[B] [13] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [14] -1 0 0x00001c30 - 0x00001c33 (0x4) IX[B] (II) Inactive PCI resource ranges: [0] -1 0 0xe8006000 - 0xe8006fff (0x1000) MX[B](B) [1] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B) [2] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [3] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xe8005c00 - 0xe8005c7f (0x80) MX[B] [1] -1 0 0xe8005800 - 0xe800587f (0x80) MX[B] [2] -1 0 0x000dc000 - 0x000dcfff (0x1000) MX[B] [3] -1 0 0xe8007000 - 0xe8007fff (0x1000) MX[B] [4] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] [5] -1 0 0xea000000 - 0xea7fffff (0x800000) MX[B](B) [6] -1 0 0xea800000 - 0xea803fff (0x4000) MX[B](B) [7] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) [8] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [9] -1 0 0x00001800 - 0x0000187f (0x80) IX[B] [10] -1 0 0x00001c38 - 0x00001c3f (0x8) IX[B] [11] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B] [12] -1 0 0x00001400 - 0x000014ff (0x100) IX[B] [13] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [14] -1 0 0x00001c30 - 0x00001c33 (0x4) IX[B] (II) Inactive PCI resource ranges after removing overlaps: [0] -1 0 0xe8006000 - 0xe8006fff (0x1000) MX[B](B) [1] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B) [2] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [3] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000dbfff (0x1c000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000dbfff (0x1c000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe8005c00 - 0xe8005c7f (0x80) MX[B] [6] -1 0 0xe8005800 - 0xe800587f (0x80) MX[B] [7] -1 0 0x000dc000 - 0x000dcfff (0x1000) MX[B] [8] -1 0 0xe8007000 - 0xe8007fff (0x1000) MX[B] [9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] [10] -1 0 0xea000000 - 0xea7fffff (0x800000) MX[B](B) [11] -1 0 0xea800000 - 0xea803fff (0x4000) MX[B](B) [12] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) [13] -1 0 0xe8006000 - 0xe8006fff (0x1000) MX[B](B) [14] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [18] -1 0 0x00001800 - 0x0000187f (0x80) IX[B] [19] -1 0 0x00001c38 - 0x00001c3f (0x8) IX[B] [20] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B] [21] -1 0 0x00001400 - 0x000014ff (0x100) IX[B] [22] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [23] -1 0 0x00001c30 - 0x00001c33 (0x4) IX[B] [24] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [25] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B) (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: "bitmap" (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Loading font Bitmap (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.1.10 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Loading extension GLX (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension RECORD (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Speedo (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mga" (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o (II) Module mga: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.1.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400, mgag550 (II) Primary Device is: PCI 01:05:0 (--) Assigning device section with no busID to primary device (--) Chipset mgag400 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000dbfff (0x1c000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe8005c00 - 0xe8005c7f (0x80) MX[B] [6] -1 0 0xe8005800 - 0xe800587f (0x80) MX[B] [7] -1 0 0x000dc000 - 0x000dcfff (0x1000) MX[B] [8] -1 0 0xe8007000 - 0xe8007fff (0x1000) MX[B] [9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] [10] -1 0 0xea000000 - 0xea7fffff (0x800000) MX[B](B) [11] -1 0 0xea800000 - 0xea803fff (0x4000) MX[B](B) [12] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) [13] -1 0 0xe8006000 - 0xe8006fff (0x1000) MX[B](B) [14] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [18] -1 0 0x00001800 - 0x0000187f (0x80) IX[B] [19] -1 0 0x00001c38 - 0x00001c3f (0x8) IX[B] [20] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B] [21] -1 0 0x00001400 - 0x000014ff (0x100) IX[B] [22] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [23] -1 0 0x00001c30 - 0x00001c33 (0x4) IX[B] [24] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [25] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B) (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000dbfff (0x1c000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe8005c00 - 0xe8005c7f (0x80) MX[B] [6] -1 0 0xe8005800 - 0xe800587f (0x80) MX[B] [7] -1 0 0x000dc000 - 0x000dcfff (0x1000) MX[B] [8] -1 0 0xe8007000 - 0xe8007fff (0x1000) MX[B] [9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] [10] -1 0 0xea000000 - 0xea7fffff (0x800000) MX[B](B) [11] -1 0 0xea800000 - 0xea803fff (0x4000) MX[B](B) [12] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) [13] -1 0 0xe8006000 - 0xe8006fff (0x1000) MX[B](B) [14] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [21] -1 0 0x00001800 - 0x0000187f (0x80) IX[B] [22] -1 0 0x00001c38 - 0x00001c3f (0x8) IX[B] [23] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B] [24] -1 0 0x00001400 - 0x000014ff (0x100) IX[B] [25] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [26] -1 0 0x00001c30 - 0x00001c33 (0x4) IX[B] [27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [28] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B) [29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (**) MGA(0): Depth 24, (--) framebuffer bpp 32 (==) MGA(0): RGB weight 888 (II) Loading sub module "mga_hal" (II) LoadModule: "mga_hal" (WW) Warning, couldn't open module mga_hal (II) UnloadModule: "mga_hal" (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) (II) MGA(0): Matrox HAL module not loaded - using builtin mode setup instead (--) MGA(0): Chipset: "mgag400" (==) MGA(0): Using AGP 1x mode (--) MGA(0): Linear framebuffer at 0xF8000000 (--) MGA(0): MMIO registers at 0xEA800000 (--) MGA(0): Pseudo-DMA transfer window at 0xEA000000 (==) MGA(0): BIOS at 0xC0000 (--) MGA(0): Video BIOS info block at offset 0x07B20 (WW) MGA(0): Video BIOS info block not detected! (II) MGA(0): MGABios.RamdacType = 0x0 (==) MGA(0): Write-combining range (0xf8000000,0x2000000) (--) MGA(0): VideoRAM: 32768 kByte (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.5 (==) MGA(0): Write-combining range (0xf8000000,0x2000000) (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) MGA(0): I2C bus "DDC" initialized. (II) MGA(0): I2C device "DDC:ddc2" registered. (II) MGA(0): I2C device "DDC:ddc2" removed. (II) MGA(0): I2C device "DDC:ddc2" registered. (II) MGA(0): I2C device "DDC:ddc2" removed. (II) MGA(0): I2C Monitor info: 0x849e440 (II) MGA(0): Manufacturer: IVM Model: 1700 Serial#: 181942 (II) MGA(0): Year: 1997 Week: 3 (II) MGA(0): EDID Version: 1.0 (II) MGA(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) MGA(0): Signal levels configurable (II) MGA(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen (II) MGA(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 (II) MGA(0): Gamma: 2.53 (II) MGA(0): DPMS capabilities: StandBy Suspend; RGB/Color Display (II) MGA(0): redX: 0.610 redY: 0.350 greenX: 0.307 greenY: 0.594 (II) MGA(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.297 (II) MGA(0): Supported VESA Video Modes: (II) MGA(0): 720x400@70Hz (II) MGA(0): 720x400@88Hz (II) MGA(0): 640x480@60Hz (II) MGA(0): 640x480@67Hz (II) MGA(0): 640x480@72Hz (II) MGA(0): 640x480@75Hz (II) MGA(0): 800x600@56Hz (II) MGA(0): 800x600@60Hz (II) MGA(0): 800x600@72Hz (II) MGA(0): 800x600@75Hz (II) MGA(0): 832x624@75Hz (II) MGA(0): 1024x768@87Hz (interlaced) (II) MGA(0): 1024x768@60Hz (II) MGA(0): 1024x768@70Hz (II) MGA(0): 1024x768@75Hz (II) MGA(0): 1280x1024@75Hz (II) MGA(0): 1152x870@75Hz (II) MGA(0): Manufacturer's mask: 0 (II) MGA(0): Supported Future Video Modes: (II) MGA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) MGA(0): #1: hsize: 1280 vsize 1024 refresh: 74 vid: 36481 (II) MGA(0): Supported additional Video Mode: (II) MGA(0): clock: 107.2 MHz Image Size: 300 x 225 mm (II) MGA(0): h_active: 1280 h_sync: 1322 h_sync_end 1426 h_blank_end 1667 h_border: 0 (II) MGA(0): v_active: 1024 v_sync: 1030 v_sync_end 1033 v_blanking: 1065 v_border: 0 (II) MGA(0): Supported additional Video Mode: (II) MGA(0): clock: 135.0 MHz Image Size: 300 x 225 mm (II) MGA(0): h_active: 1280 h_sync: 1312 h_sync_end 1456 h_blank_end 1712 h_border: 0 (II) MGA(0): v_active: 1024 v_sync: 1024 v_sync_end 1027 v_blanking: 1064 v_border: 0 (II) MGA(0): end of I2C Monitor info (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) (==) MGA(0): Min pixel clock is 12 MHz (==) MGA(0): Max pixel clock is 300 MHz (II) MGA(0): Iiyama Vision Master 17: Using hsync range of 27.00-86.00 kHz (II) MGA(0): Iiyama Vision Master 17: Using vrefresh range of 50.00-120.00 Hz (II) MGA(0): Clock range: 12.00 to 300.00 MHz (II) MGA(0): Not using default mode "1280x1024" (hsync out of range) (II) MGA(0): Not using default mode "640x512" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (hsync out of range) (II) MGA(0): Not using default mode "1792x1344" (hsync out of range) (II) MGA(0): Not using default mode "896x672" (hsync out of range) (II) MGA(0): Not using default mode "1856x1392" (hsync out of range) (II) MGA(0): Not using default mode "928x696" (hsync out of range) (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) (II) MGA(0): Not using default mode "960x720" (hsync out of range) (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) (II) MGA(0): Not using default mode "960x720" (hsync out of range) (--) MGA(0): Virtual size is 1024x768 (pitch 1024) (**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) MGA(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) MGA(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) MGA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D) (II) MGA(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (++) MGA(0): DPI set to (100, 100) (II) MGA(0): YDstOrg is set to 0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xea000000 - 0xea7fffff (0x800000) MX[B] [1] 0 0 0xea800000 - 0xea803fff (0x4000) MX[B] [2] 0 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B] [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000dbfff (0x1c000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xe8005c00 - 0xe8005c7f (0x80) MX[B] [9] -1 0 0xe8005800 - 0xe800587f (0x80) MX[B] [10] -1 0 0x000dc000 - 0x000dcfff (0x1000) MX[B] [11] -1 0 0xe8007000 - 0xe8007fff (0x1000) MX[B] [12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] [13] -1 0 0xea000000 - 0xea7fffff (0x800000) MX[B](B) [14] -1 0 0xea800000 - 0xea803fff (0x4000) MX[B](B) [15] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) [16] -1 0 0xe8006000 - 0xe8006fff (0x1000) MX[B](B) [17] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [23] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [24] -1 0 0x00001800 - 0x0000187f (0x80) IX[B] [25] -1 0 0x00001c38 - 0x00001c3f (0x8) IX[B] [26] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B] [27] -1 0 0x00001400 - 0x000014ff (0x100) IX[B] [28] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [29] -1 0 0x00001c30 - 0x00001c33 (0x4) IX[B] [30] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [31] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B) [32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (==) MGA(0): Write-combining range (0xf8000000,0x2000000) (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (--) MGA(0): 16 DWORD fifo (==) MGA(0): Default visual is TrueColor (II) MGA(0): [drm] bpp: 32 depth: 24 (II) MGA(0): [drm] Sarea 2200+664: 2864 drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed [drm] failed to load kernel module "mga" (II) MGA(0): [drm] drmOpen failed (EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI. (II) MGA(0): Using 3328 lines for offscreen memory. (II) MGA(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid filled trapezoids 8x8 mono pattern filled rectangles 8x8 mono pattern filled trapezoids Indirect CPU to Screen color expansion Screen to Screen color expansion Solid Lines Dashed Lines Scanline Image Writes Offscreen Pixmaps Driver provided FillMono8x8PatternRects replacement Setting up tile and stipple cache: 32 128x128 slots 20 256x256 slots 6 512x512 slots (==) MGA(0): Backing store disabled (==) MGA(0): Silken mouse enabled (**) Option "dpms" (**) MGA(0): DPMS enabled (II) MGA(0): Using overlay video (==) MGA(0): Direct rendering disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Keyboard "Generic Keyboard" handled by legacy driver (**) Option "Protocol" "ImPS/2" (**) Configured Mouse: Protocol: "ImPS/2" (**) Option "CorePointer" (**) Configured Mouse: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "ZAxisMapping" "4 5" (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 5 (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
bsamuels@beenthere-donethat.org.uk wrote:
I tried booting using my previous kernel with the same results so I've ruled out the new kernel.
not quite....
I have no idea where, or how, to start looking and some advice is sorely needed and would be very welcome.
(--) PCI: (0:14:0) ATI Mach64 GR rev 39, Mem @ 0xe9000000/24, 0xe8006000/12, I/O @ 0x2000/8 (--) PCI:*(1:5:0) Matrox MGA G400 AGP rev 5, Mem @ 0xf8000000/25, 0xea800000/14, 0xea000000/23
you have 2 gfx cards? it looks like the Matrox one is being made default. This is maybe what you want or not I can't tell =)
(II) Loading sub module "mga_hal" (II) LoadModule: "mga_hal" (WW) Warning, couldn't open module mga_hal (II) UnloadModule: "mga_hal" (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) (II) MGA(0): Matrox HAL module not loaded - using builtin mode setup instead
at this point its trying to load an external module that is not there, but it tries to default to something else (possibly a builtin module but I can't tell too much more)
drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed [drm] failed to load kernel module "mga" (II) MGA(0): [drm] drmOpen failed (EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI.
when you built your new kernel did you build in DRI support for your matrox card? what about the ATI card? In this situation I would think about removing one of the cards from the machine, rebuilding the kernel with the DRI support if that is something that you want/need. Then I would reconfigure X from scratch and try to get it running with only one card, once you have that you can look at adding to your configuration maybe. I will try and take a longer look for you this evening when I am home, but I do have to rebuild my machine first... HTH Adam
Adam Bower <adam.bower@framestore-cfc.com> wrote:
bsamuels@beenthere-donethat.org.uk wrote:
I tried booting using my previous kernel with the same results so I've ruled out the new kernel.
not quite....
I have no idea where, or how, to start looking and some advice is sorely needed and would be very welcome.
(--) PCI: (0:14:0) ATI Mach64 GR rev 39, Mem @ 0xe9000000/24, 0xe8006000/12, I/O @ 0x2000/8 (--) PCI:*(1:5:0) Matrox MGA G400 AGP rev 5, Mem @ 0xf8000000/25, 0xea800000/14, 0xea000000/23
you have 2 gfx cards? it looks like the Matrox one is being made default. This is maybe what you want or not I can't tell =)
Not exactly. There is an ATI video chip on the main board which I don't use as it's not as good as the Matrox G400. It has always been so.
(II) Loading sub module "mga_hal" (II) LoadModule: "mga_hal" (WW) Warning, couldn't open module mga_hal (II) UnloadModule: "mga_hal" (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) (II) MGA(0): Matrox HAL module not loaded - using builtin mode setup instead
at this point its trying to load an external module that is not there, but it tries to default to something else (possibly a builtin module but I can't tell too much more)
I don't know about an external module but nothing has changed on the machine except a Debian Testing update.
drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed [drm] failed to load kernel module "mga" (II) MGA(0): [drm] drmOpen failed (EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI.
when you built your new kernel did you build in DRI support for your matrox card? what about the ATI card?
What's DRI support? The kernel configuration hasn't changed. The kernel source update appeared to be a very minor one. 2.4.19-something to 2.4.19-somethingelse.
In this situation I would think about removing one of the cards from the machine, rebuilding the kernel with the DRI support if that is something that you want/need. Then I would reconfigure X from scratch and try to get it running with only one card, once you have that you can look at adding to your configuration maybe.
I obviously can't remove the onboard chip and I don't want to remove the G400 especially as it's been working well for months and months.
I will try and take a longer look for you this evening when I am home, but I do have to rebuild my machine first...
HTH Adam
Thanks very much for your reply. I hope my replies have cleared up some of the points. Barry Samuels
bsamuels@beenthere-donethat.org.uk wrote:
you have 2 gfx cards? it looks like the Matrox one is being made default. This is maybe what you want or not I can't tell =)
Not exactly. There is an ATI video chip on the main board which I don't use as it's not as good as the Matrox G400. It has always been so.
can you disable the onboard (ATI) video in the Bios? If you can I would *really* recommend doing this.
I don't know about an external module but nothing has changed on the machine except a Debian Testing update.
the external module is a part of X windows to allow additional capabilities for specific cards, it was complaining it couldn't find a module but appeared to carry on so it may not be needed for starting X. I don't know anything about Matrox cards as I have no experience with them.
What's DRI support? The kernel configuration hasn't changed. The kernel source update appeared to be a very minor one. 2.4.19-something to 2.4.19-somethingelse.
Direct Rendering Infrastructure, http://dri.sourceforge.net/ you may not need it.
I obviously can't remove the onboard chip and I don't want to remove the G400 especially as it's been working well for months and months.
but you hopefully can disable it =) if you have a spare monitor around you could even use it to go dual head and have two displays =) It is possible that either the new Debian X packages are broken, or perhaps don't have the matrox drivers included etc. etc. I would try looking online a configuration guide maybe. Failing that/also you should perhaps look on the Debian mailing lists and possibly look to see if anyone else has reported this as a bug etc. One other thing to check is to see if the upgrade replaced your X config file it lives in /etc/X11/ and is called XF86Config-4 HTH Adam
Adam Bower <adam.bower@framestore-cfc.com> wrote:
It is possible that either the new Debian X packages are broken, or perhaps don't have the matrox drivers included etc. etc. I would try looking online a configuration guide maybe. Failing that/also you should perhaps look on the Debian mailing lists and possibly look to see if anyone else has reported this as a bug etc.
There are no signs of anyone else reporting problems so I shall have to assume that there's nothing wrong with the packages.
One other thing to check is to see if the upgrade replaced your X config file it lives in /etc/X11/ and is called XF86Config-4
I have since tried my old, very little different, XF86Config-4 but with no change. I have also reconfigured the xserver package with also no difference. I'm stumped. I was stumped when I started so that hasn't changed either :) It does appear that the magic sysrq key combinations work when the system appears normal but trying to change to another console, <ctrl><alt><Fn> locks the system up solid and the sysrq combinations then no longer work. Can anyone offer any pointers as to what to try next please? Barry Samuels
bsamuels@beenthere-donethat.org.uk wrote:
It does appear that the magic sysrq key combinations work when the system appears normal but trying to change to another console, <ctrl><alt><Fn> locks the system up solid and the sysrq combinations then no longer work.
Can anyone offer any pointers as to what to try next please?
Faulty hardware? or maybe the Bios version on your graphics card is old and perhaps has problems with the newer version of X, maybe the Bios on the motherboard needs updating also, Is the card agp or pci? I would try taking out the Matrox now and try getting X working with the Ati card to try and discount it being anything else wrong with the system. Adam
On Mon, 4 Nov 2002 15:17:33 +0000 (GMT) bsamuels@beenthere-donethat.org.uk wrote:
Adam Bower <adam.bower@framestore-cfc.com> wrote:
bsamuels@beenthere-donethat.org.uk wrote:
I tried booting using my previous kernel with the same results so I've ruled out the new kernel.
not quite....
I have no idea where, or how, to start looking and some advice is sorely needed and would be very welcome.
(--) PCI: (0:14:0) ATI Mach64 GR rev 39, Mem @ 0xe9000000/24, 0xe8006000/12, I/O @ 0x2000/8 (--) PCI:*(1:5:0) Matrox MGA G400 AGP rev 5, Mem @ 0xf8000000/25, 0xea800000/14, 0xea000000/23
I have an MGA G400 too, though I'm running XFree86 4.1.0.1 rather than 4.2 but the equivalent lines from my X server log are: (--) PCI: (0:12:0) BrookTree unknown chipset (0x036e) rev 17, Mem @ 0xeedfd000/12(--) PCI:*(1:5:0) Matrox MGA G400 AGP rev 4, Mem @ 0xe4000000/25, 0xefefc000/14, 0xef000000/23, BIOS @ 0xefee0000/16
you have 2 gfx cards? it looks like the Matrox one is being made default. This is maybe what you want or not I can't tell =)
Not exactly. There is an ATI video chip on the main board which I don't use as it's not as good as the Matrox G400. It has always been so.
(II) Loading sub module "mga_hal" (II) LoadModule: "mga_hal" (WW) Warning, couldn't open module mga_hal (II) UnloadModule: "mga_hal" (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0)(II) MGA(0): Matrox HAL module not loaded - using builtin mode setup instead
at this point its trying to load an external module that is not there, but it tries to default to something else (possibly a builtin module but I can't tell too much more)
I don't know about an external module but nothing has changed on the machine except a Debian Testing update.
I get similar messages and X works fine on my system: (--) Chipset mgag400 found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (**) MGA(0): Depth 24, (--) framebuffer bpp 32 (==) MGA(0): RGB weight 888 (WW) Warning, couldn't open module mga_hal (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) (II) MGA(0): Matrox HAL module not found - using builtin mode setup instead(--) MGA(0): Chipset: "mgag400" I did notice the following though: (==) MGA(0): Using AGP 1x mode I too have recently upgraded the kernel and it seemed that X had slowed down but in the end I thought it might be my imagination. Seeing this I am wondering because I think it should be a 2x AGP card. On mine it seems to disable DRI for lack of memory: (--) MGA(0): Virtual size is 1600x1200 (pitch 1600) (**) MGA(0): Default mode "1600x1200": 229.5 MHz, 106.2 kHz, 85.0 Hz .... (==) MGA(0): Default visual is TrueColor (EE) MGA(0): Static buffer allocation failed, not initializing the DRI (EE) MGA(0): Need at least 22500 kB video memory at this resolution, bit depth
What's DRI support? The kernel configuration hasn't changed. The kernel source update appeared to be a very minor one. 2.4.19-something to 2.4.19-somethingelse.
I am running 2.4.20-pre10 and it's working fine. I am not sure how much help this is but hopefully some. Steve.
Adam Bower <adam.bower@framestore-cfc.com> wrote:
bsamuels@beenthere-donethat.org.uk wrote:
I tried booting using my previous kernel with the same results so I've ruled out the new kernel.
not quite....
Adam was right about not ruling out the kernel. The problem appeared to be caused by the new kernel code update. In order to rule out as much as possible I decided to go back to my previous kernel source, recompile including modules, and reinstall. Everything was back to normal. Problem went away. I recompiled the new kernel source, including modules, and after installing it the problem was back. I am now running my older kernel and there has been no recurrence of the problem. As the kernel source code was, apparently, only a minor upgrade I don't know what went wrong. Thanks for your advice Adam. Barry Samuels
participants (3)
-
Adam Bower -
bsamuels＠beenthere-donethat.org.uk -
Steve Fosdick