Hello! I bought on eBay EMailer Amstrad E3, but it was without power supply. Please email me the parameters of the power supply - output voltage, current, the polarity of the connector.
Hi,
The PSU is marked 28v 280ma (yup 28v) and is centre positive.
Cheers.
Andy.
Alexander wrote:
Hello! I bought on eBay EMailer Amstrad E3, but it was without power supply. Please email me the parameters of the power supply - output voltage, current, the polarity of the connector.
e3-hacking mailing list e3-hacking@earth.li http://www.earth.li/cgi-bin/mailman/listinfo/e3-hacking
05 октября 2007 г. Andy Collins написал:
Hi,
The PSU is marked 28v 280ma (yup 28v) and is centre positive.
Thank you! Absolutely (excluding model) is the same as for the E2. I have E2, connected with the power supply, it works. Now left-get to know whether the change EEPROM or not... For 5.1, there is still no solution?
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Alexander wrote:
[...] Absolutely (excluding model) is the same as for the E2. I have E2, connected with the power supply, it works.
Having finally been able to check...
The E3 power supply is model EM3002A and provides 33.5V, 200mA. The E2 power supply is model EM2001A and provides 28V, 280mA.
I list the model numbers because they're otherwise identical, even to the connector. Obviously by the fact that your E3 is running on the E2 supply there's a certain amount of safety margin, but still, you may want to be careful. (I certainly wouldn't want to try it the other way round.)
- -- ┌── dg@cowlark.com ─── http://www.cowlark.com ─────────────────── │ │ "There does not now, nor will there ever, exist a programming language in │ which it is the least bit hard to write bad programs." --- Flon's Axiom
07 ÏËÔÑÂÒÑ 2007 Ç. David Given ???????:
Having finally been able to check...
The E3 power supply is model EM3002A and provides 33.5V, 200mA. The E2 power supply is model EM2001A and provides 28V, 280mA.
I list the model numbers because they're otherwise identical, even to the connector. Obviously by the fact that your E3 is running on the E2 supply there's a certain amount of safety margin, but still, you may want to be careful. (I certainly wouldn't want to try it the other way round.)
Thank you! The seller sent a separate power supply premise to reduce the total cost of forwarding. I expect it the other day. However, in general it works with the power supply of E2.