On Fri, 2005-03-11 at 13:39 +0000, David Given wrote: [...]
I cannot find any documentation for this thing. Hooking it up to libjtag would probably be dead easy if I know what pin was wired to what --- I'll try taking the lid off and fishing around inside, but it's probably just an anonymous IC.
Having taken the lid off, the board inside has a bunch of resistors and two 74HC125D drivers, which means it's either Wiggler-compatible or else has a slightly different pinout. Getting this to work with libjtag is probably straightforward; I need to trace out the lines and find out what goes where. Will report back if I get a reply.
Incidentally, re getting a copy of the PBM firmware; having thought about it, it's probably best if I do it myself. It's not particularly difficult and it's probably best to remain as squeaky-clean as possible.