I'm using the cable from an old serial digital camera that I have. I guess I struck lucky there. I don't think it has any electronics in it, as neither end looks big enough to contain any.
On 2/21/06, Jonathan McDowell noodles@earth.li wrote:
On Tue, Feb 21, 2006 at 06:05:13PM +0000, David Given wrote:
Does anyone have a definitive answer as to what I need to hook up an E3 to a PC serial port?
The various opinions I've seen so far are:
- If you just wire it up, it may work, but you run some risk of frying the
UART in the E3.
True; I have mine wired up at present with no converter or level shifter.
- If you just wire it up, it won't work, because you need to invert
the signal levels.
- You can wire it up to an E2 line level converter and it will work.
True if taken together I believe; you need an E2 style converter plus an inverter.
J.
-- noodles is good in nagahama
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux)
iD8DBQFD+1cu8b1L5FtDA2cRAndXAJ90AqcoNSeMuhpa7pZXdft05trczgCfavpw plBjiacFxQxjN/UF5T4g65U= =JkH2 -----END PGP SIGNATURE-----
e3-hacking mailing list e3-hacking@earth.li http://www.earth.li/cgi-bin/mailman/listinfo/e3-hacking