bush-hacking digest, Vol 1 #44 - 6 msgs

[Vincent Sanders]

--YkJPYEFdoxh/AXLE
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Wed, Jun 26, 2002 at 11:57:26AM +0100, Matt Evans wrote:
>=20
> I had a fiddle with this last month and it was a pain in the
> arse.  Peculiarly, *TYPE devicefs:$.serial1 returned /nothing/ when I sent

you connected an external wire set to this?

> data down serial port 1, but returned gibberish (as expected) from the IR
> remote via serial2.  (The port physically works, in non-RISC OS land.)
> This would've been the perfect solution for me, nevermind all this
> modem-modem leased-line stuff :)  *serialinfo also says it's not trying
> any hardware handshaking or anything like that.  (though saying and doing
> are two diff. things.)  Anyone else tried this?  PPPconnect seems sort-of
> easy to point to the right serial port, but again nothing goes over it.=
=20

serial 1 could have been nobbled?

>=20
>=20
> -Matt=20
>=20
> ps: Lucent modem chip sits on the EASCS chip-select (asserted for
> 0x08000000 -> 0x08ffffff).  It's a 16550-alike, but think it is
> plug-and-pray so ... Presumably it could be set up to a varying address
> after 0x08000000?  Naturally one would like a standard one like 0x080003f8
> but.... :)  (can I have a flake?)
>=20

yeah if you like :-) trouble is I figured out this far too ;-) but im
dammed if i can get it to pnp :-(


--=20
Regards Vincent
http://www.kyllikki.org/

--YkJPYEFdoxh/AXLE
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE9GuqZiUwwPOvjHvURAkgHAKDsJtzvuA6J/Lvr18OtH2DfXGO1PACfUf2H
MefD9+dzxlvGnVgrE6ODkcA=
=x1ng
-----END PGP SIGNATURE-----

--YkJPYEFdoxh/AXLE--